714 MULCH TILLER
Mulch Tiller
- Simple gang depth adjustment
- Coulter gangs
- Three-bar frames
- Stabilizer wheels
Features
Specifications
Compare the specifications of up to 4 models
| Key Specs | 714-mulch-tiller Current Model |
|---|---|
| Working width 2-bar | 1.9-3.43 m 6.25-11.25 ft |
| Working width 3-bar | 3.43-6.48 m 11.25-21.25 ft |
| Transport width | 2.1-4.4 m 7-14.33 ft |
| Transport height | 1.35-3.4 m 4.42-11 ft |
| Operating depth | Inches 27.9 cm 11 in. |
| Miles per hour | 8-11 km/h 5-7 mph |
| Horsepower per shank | 8.95-14.9 kW 12-20 hp |
| Standard spacings | Inches 38.1 cm 15 in. |
| Fold | |
| Type | Rigid: 3-section |
| Working width | |
| Option 1 | 2-bar: 1.9 m 6.25 ft |
| Option 2 | 2-bar: 2.67 m 8.75 ft |
| Option 3 | 2-bar: 3.43 m 11.25 ft |
| Option 4 | 3-bar: 3.43 m 11.25 ft |
| Option 5 | 3-bar: 4.2 m 13.75 ft |
| Option 6 | 3-bar: 4.95 m 16.25 ft |
| Option 7 | 3-bar: 5.72 m 18.75 ft |
| Option 8 | 3-bar: 6.48 m 21.25 ft |
| Option 9 | |
| Option 10 | |
| Transport width | |
| Option 1 | 2.1 m 7 ft |
| Option 2 | 2.67 m 8.75 ft |
| Option 3 | 3.7 m 12 ft |
| Option 4 | 3.7 m 12 ft |
| Option 5 | 4.3 m 14 ft |
| Option 6 | 5 m 16.5 ft |
| Option 7 | 4.4 m 14.33 ft |
| Option 8 | 4.4 m 14.33 ft |
| Option 9 | |
| Option 10 | |
| Transport height | |
| Option 1 | 1.35 m 4.42 ft |
| Option 2 | 1.35 m 4.42 ft |
| Option 3 | 1.35 m 4.42 ft |
| Option 4 | 1.3 m 4.33 ft |
| Option 5 | 1.3 m 4.33 ft |
| Option 6 | 1.3 m 4.33 ft |
| Option 7 | 3.2 m 10.33 ft |
| Option 8 | 3.4 m 11 ft |
| Option 9 | |
| Option 10 | |
| Number of shanks - fold | |
| Option 1 | Rigid: 5-shank |
| Option 2 | Rigid: 7-shank |
| Option 3 | Rigid: 9-shank |
| Option 4 | Rigid: 9-shank |
| Option 5 | Rigid: 11-shank |
| Option 6 | Rigid: 13-shank |
| Option 7 | Folding: 15-shank |
| Option 8 | Folding: 17-shank |
| Option 9 | |
| Option 10 | |
| Operating depth | |
| Inches | 27.9 cm 11 in. |
| Operating speed | |
| Miles per hour | 8-11 km/h 5-7 mph |
| Horsepower required | |
| Horsepower per shank | 8.95-14.9 kW 12-20 hp |
| Depth control | |
| Options | Single point on 3-bar machines |
| Hitch | |
| Type | Turnbuckle leveling adjustment: Tube: 51x127 mm 2x5 in. |
| Frame | |
| Description | Rigid frame: cross members: 102x102 mm 4x4 in. Side members: 51x102 mm 2x4 in. Diagonal frame supports: 76x127 mm 3x5 in. |
| Underframe clearance | 81.3 cm 32 in. |
| Standard spacings | |
| Inches | 38.1 cm 15 in. |
| Standard options | |
| Option 1 | Spec 32x51x813 mm 1.25x2x32 in. Rigid |
| Option 2 | Spec 32x51x813 mm 1.25x2x32 in. Trip clearance: 254 mm 10 in. Trip force: 295 kg 650 lb Trip force 295 kg 650 lb Trip height 25.4 cm 10 in. Spring-reset |
| Option 3 | Spec Edge bend: 51x32x813 mm 2x1.25x32 in. Trip clearance: 279 mm 11 in. Trip force: 567 kg 1,250 lb Trip force 567 kg 1,250 lb Trip height 27.9 cm 11 in. Tru-Depth |
| Disk coulters/gangs | |
| Description | One set at front of machine |
| Type | Disk or coulter |
| Blade size | 50.8x0.65 cm 20x0.256 in. On 2-bar: 0.45 cm 0.177 in. |
| Coulter size | 50.8x0.5 cm 20x0.197 in. |
| Blade/coulter spacing | 22.9 cm 9 in. |
| Type of scrapers | Rigid bar |
| Type of protection | Coil spring |
| Gang shaft | 7.62x10.2 cm 3x4 in. |
| Wheels and tires | |
| Option 1 | Single wheel - 9.5L-15FI Load Range D (2-bar design) |
| Option 2 | Single wheel 11L-15FI Load Range D (3-bar) |
| Option 3 | Walking tandem - 9.5L-15FI Load Range D (3-bar) |
| Option 4 | Walking tandem - 11L-15FI Load Range D (3-bar) |
| Additional features | |
| Option 1 | |
| Option 2 | |
| Option 3 | |
| Additioanl information | |
| Date collected | |
| Ground-engaging components | |
| Options |