Need 24/7 Parts? Call 855-573-7278

FIND YOUR JAMES RIVER

XUV835M HVAC UTILITY VEHICLE

Crossover Utility Vehicle

Three person cockpit
Power steering for maneuverability
Over 16 gallons (57 L) of enclosed storage
Factory-installed cab with heat and A/C

Apply For Financing

View Product Brochure

Features

Conquer tough terrain with confidence

You will feel confident and comfortable, even on tough terrain, with a full-size Gator™ Utility Vehicle. You will feel stable with a low center of gravity and a wide stance. Engine braking and four-wheel hydraulic disc brakes keep you in control on steep descents, even when fully loaded. The power steering on M- and R-Trim vehicles, is smooth and responsive.

Standard four-wheel drive with rear differential lock

Dash mounted four-wheel drive and rear differential lock switches

With standard four-wheel drive and rear differential lock, both instantly available with the flip of a switch, you can get where you are going.

Dual A-arm front and rear independent suspension

Rear suspension and ground clearance

The independent suspension provides a smooth ride as 203 mm (8 in.) of front suspension travel and 229 mm (9 in.) of rear suspension travel cushions bumps and glides over ruts. And clearing rocks and roots is no problem with 284 mm (11.2 inches) of ground clearance.

Tires for any terrain

Terra Hawk all-terrain tire

Maxxis® Bighorn® 2.0 extreme terrain radial tire

Predator Heavy-Duty all-terrain radial tire

Full-Size Gator Utility Vehicles are available with three tire options:

Terra Hawk all-terrain tires
- Tread pattern and wide footprint provide excellent traction with minimal impact on terrain
Maxxis Bighorn 2.0 extreme terrain radial tires
- Radial construction provides shock absorption, allowing for a smoother ride
- Non-directional tread pattern provides predictable cornering and claws up roots and rocks
Predator Heavy-Duty all-terrain radial tire
- Radial construction provides shock absorption, allowing for a smoother ride
- Flat profile increases footprint area, reducing ground pressure
- 8-ply rating delivers up to three times the life of Bighorn tires

Maxxis® Bighorn® is registered trademark of Cheng Shin Rubber Ind. Co., Ltd.

Built for the long haul

Full-size Gator™ XUVs are built to work hard and go the extra mile.

Heavy-duty frame

Underside view of XUV865M

Underside view of XUV825M S4

The hefty frame is designed to stand-up to all the bumps and bends of the trail, and the standard front skid plate protects key components from damage.

Constant velocity boot protection

Constant velocity joints are enclosed to keep water and dirt out. A protector shield protects the boot from trail debris.

Automotive-grade panels and optional protection packages

TrueTimber® KANATI camo XUV865R with optional Premium Protection Package

The hood and side panels are made of automotive-grade materials that resist scratches and dents, and the cargo box is made of tough composite material that resists dents and rust. Optional protection packages look tough and provide even more protection.

TrueTimber® is a trademark of True Timber Outdoors Holding Company, LLC.

Automotive-like controls

Instrument display, shift lever, and switches (shown on XUV835R Signature Edition)

When you sit behind the wheel of a full-size Gator™ Utility Vehicle, you will be reminded of your favorite pick-up truck. There are controls at your fingertips, an easy-to-read instrument panel, and outlets to recharge your phone.

Shift from park and into gear with a throw of a single lever. Power steering on M- and R- trim vehicles is smooth and responsive.

When the going gets tough, you can instantly engage four-wheel drive and rear differential lock with switches. Even at night, the backlit switches are easy to see. If a front wheel starts to slip, the front differential automatically locks to pull you through.

Room for you, plus two, with cab comfort

When you hop into the seat of a full-size Gator™ Utility Vehicle, you will notice there’s seating for you, plus two.

Three-passenger seating with room to spare

40/60 split three-passenger bench seat

Operator platform

The adjustable operator’s seat and tilt steering lets drivers of all sizes get comfortable, and the passenger grab handles help everyone feel secure. The low step height and generous opening between seat base and fender is even designed to accommodate bulky work boots.

Climate-controlled comfort

HVAC controls

Partially-open door windows and fully-open windshield

On cab vehicles, you will enjoy standard heating and air-conditioning that will keep you comfortable in every season, and the tight-closing doors help seal out dust and reduce noise. When you want to let in the breeze, you can also roll down the windows and open the front windshield.

Upgrade to R-trim refinements

Stone colored dash with sport steering wheel

Headliner, sun visors, rearview mirror, and dome light

R-trim vehicles have an upgraded stone-colored cab interior with headliner and rear panel to reduce noise. Standard LED headlights, sun visor, dome light, rearview mirror, and sport steering wheel round out the package.

Stone cloth seat

R-trim vehicles also include a stone cloth seat that keeps cool in the hot sun and warms up quickly in the winter.

Add precision ag technology to your Gator™ Utility Vehicle

XUV835R with AutoTrac Ready option

Interior of XUV835R with Gen 4 4640 Universal Display

Precision ag technologies have changed the way we farm, and John Deere has been at the forefront of that change. Adding the AutoTrac™ assisted steering system and JDLink™ Modem options to Gator Utility Vehicles brings precision ag technology to farms of all sizes.

The AutoTrac Ready option enables hands-free steering through the field decreasing overlap and lowering input costs while reducing operator fatigue. The JDLink Modem option connects your vehicle to the John Deere Operations Center so the vehicle can be managed with the rest of your fleet.

Simplify field boundaries

Check field boundaries and identify hazards as the Gator Utility Vehicle steers itself along established boundary lines.
Create new boundary lines, even when the soil is too wet for larger equipment.

Improve soil mapping

The days of picking a tree across the field to navigate are over. Use guidance lines to create a sampling grid and let your Gator Utility Vehicle keep you on track as you pull plugs across the field.

Connect your Gator Utility Vehicle to the rest of your fleet

Leave the USB drives at home as you wirelessly send your data to and from your Gator Utility Vehicle.
A planter operator can flag the exact location of a large rock so the Gator UV can be sent to the location to remove the hazard.

Save time and stop waiting for the perfect day to spray

When paired with a tow behind sprayer and rate controller, the Gator Utility Vehicle’s lighter weight allows work to be completed when the ground is too wet for larger equipment.
Speed through spraying by allowing the Gator Utility Vehicle to steer a predefined path around buildings and fence rows.

Track productivity, maintenance, and machine vitals

Track the current and past locations of your Gator Utility Vehicle in the John Deere Operations Center, just like the rest of your fleet.
Know when your Gator Utility Vehicle is ready for scheduled maintenance

Share StarFire™ Receiver and Universal Display

You can leave precision ag technology components installed year-round or share your StarFire Receiver and Universal Display with another piece of equipment.

Haul more in fewer trips

The full-size Gator™ XUV can haul 454 kg (1000 lb), so load it up with confidence. You can also make fewer trips with 1814 kg (4000 lb) of towing capacity and a standard 51-mm (2-in.) receiver hitch.

Built-tough cargo box

Cargo box (shown with spray-in liner and optional taillight protectors)

Cargo box converted to flatbed

The cargo box resists dents, scratches, and rust because it is made from a tough composite material. You will have no problem securing loads with integrated tie bars and 14 tie-down points. You can also convert the cargo box to a flatbed when you need to haul big and bulky loads.

The cargo box measures 1143 mm (45 in.) long, 1320 mm (52 in.) wide, and 305 mm (12 in.) deep.

One-handed tailgate

Tailgate handle

Since your hands are always full, the tailgate can be opened and closed with one hand. You can also lower the tailgate to carry longer items or remove it for easy cleanout.

Power lift

Deluxe cargo box unloading rocks

To save your back, the optional cargo box power lift empties heavy loads with the push of a button.

Powerful EFI engine and drivetrain

812-cc (49.6-cu in.) gasoline engine and drivetrain

The XUV835 and XUV825M S4 Gator™ Utility Vehicles are powered by an electronic fuel injection (EFI) gasoline engine with liquid-cooled, dual-overhead cams. This engine is designed to provide maximum power and fuel efficiency to muscle through tough jobs.

It also has plenty of torque in low range, and fast speeds in high range. The enclosed drivetrain automatically adjusts for fast acceleration, along with powerful hauling and hill-climbing capabilities.

Store more gear

One-row full-size Gator XUVs come packed with places to store tools, gear, and beverages.

Cup holders

Four cup holders and center tray (shown on XUV835E)

Cab door cup holder and pocket

The dash has four cup holders, and cab vehicles have a cup holder in each door.

Dash and under-seat storage

Under seat storage (shown on XUV835E)

Glove box, storage pocket, and two dash bins (shown on XUV835M cab)

The vehicles also feature an enclosed glove box, center tray, dash storage pocket and under-seat storage. Depending on the configuration, vehicles may have up to three additional dash bins and under-hood storage.

Color options and styling

Green and yellow XUV835R Signature Edition with included Ultimate Protection Package

Olive and black XUV865M with cab and optional brush guard

TrueTimber® KANATI camo XUV865R with optional Premium Protection Package

You will get noticed with the distinctive styling of full-size Gator™ XUVs. Available in three colors, with various protection packages, and more than 100 attachments, you can create a custom look that will turn heads.

TrueTimber is a trademark of True Timber Outdoors Holding Company, LLC.

Go further between fill ups

Large fuel tank fill opening

Full-size Gator™ XUVs have a large 42.8-L (11.3-gal.) fuel tank so you go further between fill ups. A 76-mm (3-in.) diameter fill opening reduce spills.

Specifications

Key Specs	xuv835m-hvac-utility-vehicle Current Model
Engine power	40.3 kW 54 hp
Cargo box dimensions	1143 x 305 x 1320 mm 45 x 12 x 52 in.
Cargo box capacity (weight)	454 kg 1000 lb
Towing capacity	Up to 1814 kg 4000 lb
Front suspension	Fully independent dual A-arm with adjustable coils; 203 mm (8 in.) of travel
Rear suspension	Fully independent dual A-arm with adjustable coils and sway bar; 229 mm (9 in.) of travel
Final drive	Park, high, low, neutral, reverse transaxle
Four wheel drive	Dash switch actuated four-wheel drive system
Fuel capacity	42.4 L 11.2 U.S. gal.
Engine
Type	4-cycle gas, electronic fuel injection (EFI)
Displacement	812 cc
Power	40.3 kW 54 hp
Cooling system	Liquid
Drivetrain
Transmission	Continuously Variable Transmission (CVT) with clutch enclosure
Final drive	Park, high, low, neutral, reverse transaxle
Four wheel drive	Dash switch actuated four-wheel drive system
Traction assist	Limited slip front differential, Positive locking, switch actuated rear differential lock
Descent control	Yes
Suspension
Front	Fully independent dual A-arm with adjustable coils; 203 mm (8 in.) of travel
Rear	Fully independent dual A-arm with adjustable coils and sway bar; 229 mm (9 in.) of travel
Brakes
Type	Front/rear hydraulic disc with twin piston front calipers
Park brake	Park in-transmission, Optional factory-installed secondary foot operated with hand release
Tires / Wheels
Front	27x9-R14 Maxxis® Bighorn® 2.0 extreme terrain radials on steel or alloy wheels 27x9-R14 Predator Heavy-Duty all-terrain radials on steel or alloy wheels
Rear	27x11-R14 Maxxis Bighorn 2.0 extreme terrain radials on steel or alloy wheels 27x11-R14 Predator Heavy-Duty all-terrain radials on steel or alloy wheels
Dimensions / Capacities
Wheelbase	2146 mm 84.5 in.
Weight	With fuel and fluids: 1022 kg 2253 lb
Length	3228 mm 127 in.
Width	1763 mm 69.4 in.
Height	1987 mm 78.2 in.
Tread centers	Front: 1341 mm 52.8 in. Rear: 1259 mm 49.6 in.
Ground clearance	284 mm 11.2 in.
Fuel capacity	42.4 L 11.2 U.S. gal.
Cargo box dimensions	1143 x 305 x 1320 mm 45 x 12 x 52 in.
Cargo box capacity (weight)	454 kg 1000 lb
Payload capacity	523 kg 1153 lb
Towing capacity	Up to 1814 kg 4000 lb
Hitch	Standard receiver: 5.1 cm 2 in.
Features
Color	Green and yellow, TrueTimber® KANATI® camo, olive and black
Power steering	Yes
Battery / Alternator / Power port	Battery: 12 V 480 CCA Alternator: 85 amp DC outlet: 12 V
Instrumentation	Digital display (gear position, system diagnostic light, speed, rpm, 4WD indicator, rear differential indicator, fuel level, coolant temperature, hour meter, miles, and service interval warning light)
Storage	Total: 69.5 L 18.4 gal. Six cup holders: 4.6 L 1.2 gal. Center tray: 1.2 L 0.3 gal. Two dash bins: 3.3 L 0.9 gal. Storage pocket: 1.4 L 0.4 gal. Glove box: 3.8 L 1.0 gal. Under seat: 55.3 L 14.6 gal.
Seating	Black vinyl 40/60 split three-passenger bench

Accessories and Attachments

Ag Management Solutions

AMS Integration - BUC10634

StarFire™ 3000 Receiver installed on XUV835R

GreenStar™ display installed on XUV835R with optional phone and tablet mounts

The AMS integration kit allows the operator to mount a StarFire Receiver and GreenStar display (both receiver and display sold separately) to the Gator™ Utility Vehicle.

Key features of the AMS integration kit:

Compatible with StarFire iTC, StarFire 3000, and StarFire 6000 Receivers
Compatible with GreenStar 2 1800, GreenStar 2 2600, GreenStar 3 2630, and John Deere 4640 Universal Display
Ability to mount receiver to the poly roof or on the occupant protective structure (OPS) alone

NOTE: Additional components are required to support the John Deere 4640 Universal Display include:

AL212683 (1)
21M7577 (2)

Common applications:

Boundary mapping
Flagging field obstacles
Soil sampling

Compatibility:

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Electrical harness requirements:

XUV835/865	Attachment harness required (see below)
E	1, 3, 5, 6
M (open station)	3, 5, 6
M (cab, factory installed)	5, 6
R	6

1	E-spec attachment harness
2	Front attachment harness
3	Roof attachments harness
4	Front cab harness
5	Rear cab harness
6	Dash port harness

Code	Attachment	Description
	BUC10634	AMS integration kit

Backup Alarm

Backup Alarm - BM24726

The back-up alarm kit alerts pedestrians when the Gator™ is operating in reverse:

Includes alarm, mounting brackets, wire harness, and reverse switch (if not already installed)
Conforms to SAE J994 performance specifications for a Type D alarm and is 89 dBA per the SAE specification (measured at 4 ft)

Bumper

Rear Bumper - BM22767

Rear bumper kit (TH 6X4 shown)

The rear bumper offers stylish, heavy-duty rear protection to the vehicle.

Compatible with:

Model year 2011 and later Gator™ XUV 625i, XUV 825, and XUV 855 Utility Vehicles
Model year 2010 and later Gator TX, TX Turf, TH 6X4 Gas, TH 6X4 Diesel, and TE Utility Vehicles
Model year 2018 and later Gator XUV835 and XUV865 Utility Vehicles

Cab Operator's Station

Cell Phone Mount Kit - BRE10015

Cell phones, global positioning system (GPS), and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator station.

RAM X-Grip holder

For proper machine operation, it is critical that accessory devices and tools be located and mounted where they are accessible but do not interfere with visibility and controls. The new RAM® mount kit has been specially developed to meet this need in John Deere tractors and now utility vehicles.

Simply remove the large wing nut from the assembly, insert the stud into any open hole in the occupant protective structure (OPS), and tighten down the jam nut.

Key benefits:

Patented RAM X-Grip™ holder fits most cell phones and similar devices including iPod®, iPad®, iPhone®, BlackBerry®, Samsung Galaxy® and others.
Mounts to the holes in the OPS
Ball joints allow for variable positioning
Holds firm even in rugged terrain
The holder is compatible with many other RAM® products with their B size or 25.4-mm (1-in.) ball accessories

RAM X-Grip

The RAM X-Grip has a clean and clever four-leg design that sports great holding power without hiding the phone behind foam pads and plastic.

Features:

Rustproof
High-strength composite and stainless-steel construction
Spring-loaded holder expands and contracts for custom fit
- Minimum width: 1.875 in. (47 mm)
- Maximum width: 3.25 in. (82 mm)
- Depth: 0.875 in. (22 mm)
Rubber-coated tips will hold device firm and stable
Easy access grip knobs for quick release of your device

Warranty:

90 days, limited.

RAM and RAM X-Grip are trademarks of National Products Inc. iPad, iPod, and iPhone are trademarks of Apple, Inc. BlackBerry is a trademark of Research In Motion Limited (RIM). Samsung Galaxy is a trademark of Samsung Electronics Co.

Cargo Box

19 L (5 gal) Pail Holder - BM23849

Cargo box pail holder

The 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle. The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure. Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.

Cargo Bed Extender - BM25700

Cargo bed extender

The cargo bed extender conveniently extends the rear of the cargo bed, and also acts as a cargo box divider when it is flipped inside of the cargo box. The cargo bed extender easily flips in or out with the use of quick-pull pins.

Cargo Box Bed Mat - BM22772

Deluxe cargo box bed mat

The deluxe cargo box bed mat not only protects the steel floor from scratches and dents, it also provides additional cushioning and slip resistance to items being hauled in the cargo box.

Cargo Box Divider - BM22769

Cargo box divider located at rear of cargo bed

Cargo box divider located at front of cargo bed

Speedrail lock in the unlocked postion

Speedrail lock in the locked postion

The Gator™ XUV Series can be equipped with an optional divider for the deluxe cargo box. The dividers can be positioned at the front or rear of the cargo box bed. To change positions of the dividers, simply release the speedrail locks by hand and slide into new position, then close the locks to secure the dividers.

Cargo Box Side Extension Kit - BM24901

Cargo box side extension kit

The cargo box side extension kit expands the versatility of the Gator™ Utility Vehicles and is ideal for those who are enhancing their property and landscape. The extensions allow operators to haul twice the volume (not to exceed cargo box weight capacity) of light material such as grass clippings and mulch.

Product features include:

Four-sided structure that increases cargo box side height to 533 mm (21 in.) and volume to 0.74 m³ (26 cu ft)
Mounted on the sides and front with hardware, while the tailgate can be attached or removed without tools
- Tailgate pivots at the top (similar to a dump truck) for ease of dumping loose material
Laser-cut, heavy-gauge, powdered-coated steel provides excellent durability
Compatible with all model year 2011 to current Gator XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, and M-Gator A2 Utility Vehicles
Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles.
Compatible with Gator cabs and bedliner

NOTE: The cargo box side extensions are not intended to increase the rated cargo box carrying capacity per the vehicle specification.

Cargo box side extensions cover - BUC10156

Cargo box side extension kit (required, sold separately)

Cargo box side extensions cover

Tailgate down, side extension flipped up

Key features

The cover closes off the top of the side extensions, ideal for hauling hunting dogs and small animals
Easily attaches to the side extension kit (required, sold separately)
Dimensions: 132-cm (52-in.) wide x 65-cm (25.5-in.) tall x 114-cm (45-in.) deep

Compatibility

Model year 2011 to current XUV625i, XUV825i/E/M, XUV825i/E/M S4, XUV855D/E/M, and XUV855D/E/M S4 Utility Vehicles
Model year 2010 to current TX, TX Turf, TH, and TE Utility Vehicles
Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Model year 2018 to current HPX615 and HPX815 Utility Vehicles

Label kit for toolboxes (Green & Yellow) - BM26220

Rear Fender Flare - BUC10567

Rear fender flare kit on XUV865

Rear fender flare kit

A – Fender flare

B – Fender

The rear fender flare kit minimizes debris from reaching the operator station.

Product features include:

Two pliable fender flares (one for each side)
Hardware for mounting on the sides
Compatible with all model year 2011 to current Gator™ XUV825, XUV825 S4, XUV855, XUV855 S4, XUV835, and XUV865 Utility Vehicles
Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles

Side Tool Rack - BM22775

Tool rack

Tool rack with tools

The side tool rack enables the user to maximize the use of their cargo box by carrying long-handled tools, such as trimmers, shovels, and rakes, on the outside of the box. The holders are adjustable, allowing the users to carry a wide array of items in the racks.

Tool rack holder detail

Adjusting the tool rack holder

Spare Tire Carrier - BM25577

Spare tire carrier

Easily mount a spare tire to the side of the cargo box with this convenient kit.

Recommended to carry spare front tire, as the front tire can be mounted on either the front or rear hubs.

Sportsman Gear Bag - LP67754

Sportsman gear bag (closed)

Sportsman gear bag (open)

Quick-connect latches on cargo box

Key features

Holds two firearms up to 1.3 m (51 in.) in length
Firearm support blocks can be removed to transport a wide array of gear
Bag easily attaches and detaches to cargo box with quick-connect latches for easy storage in the off season
Convenient carry straps
Made from waterproof, mildew- and abrasion-resistant material to keep gear dry
Oversized, corrosion-resistant zippers for durability and ease of use
Rain flap covers the zipper to prevent water infiltration

Compatibility

Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
Model year 2010 to current TX, TX Turf, TH, and TE Utility Vehicles
Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Ordering information

Available through Order Zone

Cargo Box Lift

Cargo Box Power lift - BM26414

Shown in full up position

The Gator™ XUV Series can be equipped with an optional power lift for the cargo box. This is one of the most important accessories for increasing work efficiency. It is an excellent complement to these highly capable utility vehicles.

Key features

Capable of lifting a maximum vehicle cargo box load of 454 kg (1000 lb)
Lifts box to 49 degrees from horizontal for ease of service and cargo box load removal
Quick horizontal-to-49-degree time
Can be installed in minutes using the vehicle's prewired connectors and mounting points
Compact design fits nicely around the transmission and linkages, providing full protection
Fully sealed and weatherproof design does not require maintenance and is built for maximum durability
Overload protection protects against misuse

Compatibility

Model year 2018 to current XUV825 and XUV855 Utility Vehicles
Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Cover

Deluxe Cargo Box Cover- Camo - LP19879

Deluxe cargo box cover (shown in black)

The deluxe cargo box cover easily installs without tools and keeps the cargo secure and protected from the elements. It is compatible with Gator Utility Vehicles equipped with the all-new deluxe cargo box.

Compatible with all model year 2011 - current Gator XUV 625i, XUV 825i, XUV 855D, TX, TX Turf, TH 6X4, TE, M-Gator™ A2, and M-Gator A3 Utility Vehicles.

Compatible with all model year 2013 - current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles.

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

Deluxe cargo box cover - Camo
Order number: LP19879

Vehicle storage cover - LP68148

Vehicle storage cover

Key features

All-season protection against sun damage, rain, dust, and tree sap
Reinforced corners for added durability
Fabric coated for maximum water resistance and repellency
Elastic shock cord in bottom hem for a quick, custom fit

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Ordering information

Available through Order Zone

Drawbar

48mm (1 7/8-in.) hitch ball for ball-type hitch. Ball Mount sold separately. - PM05101

48-mm (1-7/8-in.) hitch ball

The 48-mm (1-7/8-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.

The ball hitch is available through Service Parts.

51mm (2-in.) hitch ball for ball-type hitch. Order ball mount separately. - PM05201

48-mm (1-7/8-in.) ball hitch shown

The 51-mm (2-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.

The ball hitch is available through Service Parts.

Drawbar

Drawbar/ ball mount for 51mm (2 in.) receiver hitch. Hitch Ball sold separately. - BM22290

Drawbar kit for receiver hitch

Description:

Kit includes a 51-mm (2-in.) drawbar, 10-mm (0.39-in.) pin, and hair cotter pin
Steel construction has a 25-mm (1-in.) ball hole size
Can be mounted in the standard rear receiver hitch or the optional front receiver hitch
Compatible with all Gator model year 2011-current XUV560, XUV560 S4, XUV590, XUV590 S4, XUV 625i, XUV 825, XUV 855, RSX860, and M-Gator™ A2 Utility Vehicles
Compatible with HPX 615 and 815 Utility Vehicles
Compatible with XUV 620i and XUV 850D Utility Vehicles

NOTE: Compatible with all Gator HPX Utility Vehicles if equipped with an optional 51-mm (2-in.) front receiver hitch. An optional 51-mm (2-in.) rear receiver is not available for the Gator HPX models. A 32-mm (1-1/4-in.) rear receiver hitch and drawbar are available for the Gator HPX models.

Floor Mat

Floor Mats (2) - BM26462

Left floor mat

Right floor mat

Key features

Kit includes left and right floor mats
Made from 8-mm (5/16-in.) thick textured rubber
Tool-less install and easy removal for cleaning
Helps further dampen operator station noise

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Front Rack

Front Hood Rack - BM26109

Hood rack

Hood rack (hinged forward)

Key features

124.5-cm (49-in.) long x 36-cm (14.25-in.) wide x 11-cm (4.25-in.) deep
Welded steel tubing
Design allows for convenient tie-down points to secure load
45-kg (100-lb) capacity

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Requires brush guard to be installed

MOLLE Device Pouch - Black - LP66151

MOLLE device pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Velcro flap closure
Padded to protect device and contents
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 6-in. (152.4-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Built-in drain hole
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Device Pouch - Camo - LP66150

MOLLE device pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Velcro flap closure
Padded to protect device and contents
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 6-in. (152.4-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Built-in drain hole
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Fire Extinguisher Pouch - Black - LP66153

MOLLE fire extinguisher pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Military-grade rapid extraction clips
Fits standard round 2.5-lb (1.1-kg) fire extinguishers
Padded to protect contents
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 6–in. (152.4-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Fire Extinguisher Pouch - Camo - LP66152

MOLLE fire extinguisher pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Military-grade rapid extraction clips
Fits standard round 2.5-lb (1.1-kg) fire extinguishers
Padded to protect contents
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 6–in. (152.7-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Large Pouch - Black - LP66149

MOLLE large storage pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Dual military-grade zippers and pulls
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 5–in. (127-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Built-in drain hole
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Large Pouch - Camo - LP66148

MOLLE large storage pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Dual military-grade zippers and pulls
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 5–in. (127-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Built-in drain hole
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Small Pouch - Black - LP66147

MOLLE small storage pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Military-grade zippers and pulls
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 5–in. (127-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Small Pouch - Camo - LP66146

MOLLE small storage pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Military-grade zippers and pulls
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 5–in. (127-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

Guards

Brushguard - BUC10679

Brush guard

Quick pull pins

Brush guard hinged forward

Auxiliary lights mounted on brush guard (sold separately)

Key features

Provides a modern and aggressive appearance
Heavy-duty, 44.45-mm (1.75-in.) diameter, steel tube construction
Welded steel brush guard provides protection for the front grille, lights, and hood
Easy-to-use quick pull pins allow the brush guard to be hinged forward to gain access under the hood
Includes mounts for auxiliary light-emitting diode (LED) lights (sold separately)

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Brushguard extensions - BUC10141

Brush guard extensions

Brush guard with extensions hinged forward

Brush guard with extensions

Key features

Enhances the aggressive appearance of the vehicle
Easily attaches to the brush guard (required – sold separately)
Provides additional protection to the side hood and fender area without adding additional overall width to the vehicle
Still allows full entry under the hood when brush guard is hinged forward

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

CV Guards - front & rear - BM25863

Front CV guards

Rear CV guards

Key features

Kit contains both front and rear CV guards
Additional added protection for the A-arms and CV joints
High-strength, formed steel guards handle impacts while maintaining a low, unsprung mass to provide exceptional ride quality
Easily bolts to the A-arms
Drainage holes on the bottom of the guards prevent buildup of dirt, grass, and other loose materials

Compatibility

Model year 2018 XUV835 and XUV865 Utility Vehicles

Cargo Box Fender Guard - BM26129

Cargo box fender guards

Key features

Connects with rear bumper (required – sold separately)
Provides enhanced styling in addition to heavy-duty protection to the side of the cargo box

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Front Fender Guard - BUC10247

Front fender guards - shown with brush guard (required) and brush guard extensions (optional)

Key features

Easily attaches to the brush guard (required – sold separately)
Provides protection to the front fender area
- NOTE: With fender guards installed, the overall width of the vehicle increases to 1.75 m (69 in.).

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Rear panel glass protector - BUC10245

Rear-panel glass protector

Key features

Provides protection to the cab rear-panel glass
- NOTE: Never carry loads in the cargo box over the load guard.
Perforated, black metal screen easily attaches to the cab rear panel (required – sold separately)

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Harnesses

CAN Bridge Control Kit - BUC10316

Front Attachment Harness - BM26265

Front attachment harness

Key features

The front attachment harness includes connections for the following kits:

Light-emitting diode (LED) headlights
Turn signals
Horn
Brush-guard-mounted auxiliary lights

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Front Attachment Harness (dash port) - BM26268

Dash port harness connection

Dash port harness – lower connectors

Key features

The front attachment harness (dash port) includes connections for the following kits:

Rear sprayer
Rear spreader
Blades
GreenStar™ Display as part of the Ag Management Solutions (AMS) integration kit

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Hydraulic Blade and Winch Harness Kit - BUC10604

Hydraulic blade and rear winch harness

Key features:

The hydraulic blade and winch harness includes connections for the following kits:

Hydraulic blade
Winch

Compatibility:

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Rear Cab Attachment Harness - BM26739

Rear cab attachment harness

Key features

The rear cab attachment harness includes connections for the following kits:

Rear auxiliary lights
Beacon light
Ag Management Solutions (AMS) receiver harness

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Horn

Horn Kit - BM26391

Horn

Horn switch

Key features

Frequency: 410 Hz
Sound pressure level: 100+ dB(A)
Water-sealed type

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Electrical harness requirements

XUV835/865	Attachment harness required (see below)
E	1, 2
M (open station)	2
M (cab, factory installed)	2
R	---

1	E-spec attachment harness
2	Front attachment harness
3	Roof attachments harness
4	Front cab harness
5	Rear cab harness
6	Dash port harness

Lighting

Beacon Light - BM26185

Beacon light in up position

Beacon light in down position

Backlit beacon light switch

Key features

76-mm (3-in.) round, light-emitting diode (LED) strobe light provides excellent visibility for vehicle bystanders
Especially useful for working around properties and job sites
Acrylic amber lens resists scratching and scuffing
Impact-resistant nylon housing
Society of Automotive Engineers (SAE) J845 (Class 3)-compliant
UL® recognized
Flash rate: 60 +/- 10 fpm
Stands 21.3-cm (8.4-in.) tall from roof/occupant protective structure (OPS)
Folds down out the way when not in use

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Electrical harness requirements

XUV835/865	Attachment harness required (see below)
E	1, 3, 5
M (open station)	3, 5
M (cab, factory installed)	5
R	---

1	E-spec attachment harness
2	Front attachment harness
3	Roof attachments harness
4	Front cab harness
5	Rear cab harness
6	Dash port harness

UL is a trademark of UL LLC.

LED Driving Lights (2 Lights) - BM26215

Front cab mounted

Rear cab mounted

Brush guard mounted

Key features

The LED driving lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
Beam pattern: driving (focused, intense beam of light good for illuminating a stretch of road directly in front of the vehicle)

Driving beam pattern – mounted on brush guard

Driving beam pattern – mounted on OPS/roof

Lamp sealing: IP69K
Light output (per light): 1150 lumens
LED color temperature: 5000 K
Amp draw (per light): 1.4 amps
6 LEDs per light
Aluminum housing

Compatibility

Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
HPX Utility Vehicles

LED Headlights (2) - BM26589

LED headlights

Three-position backlit light switch

Key features

Upgrade from halogen headlights
High/low beam
Raw lumen output (per light): 1,075 (high beam), 430 (low beam)
Effective lumen output (per light): 720 (high beam), 240 (low beam)
Nominal LED color temperature: 5000 K
Current draw: 1.14 amps (high beam), 0.41 amps (low beam)

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Electrical harness requirements

XUV835/865	Attachment harness required (see below)
E	1, 2
M (open station)	2
M (cab, factory installed)	2

1	E-spec attachment harness
2	Front attachment harness
3	Roof attachments harness
4	Front cab harness
5	Rear cab harness
6	Dash port harness

LED Work Lights (2 Lights) - BM26216

Front cab mounted

Rear cab mounted

Brush guard mounted

Key features

The LED work lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
Beam pattern: flood (spread of light over a wider, shorter distance)

Flood beam pattern – mounted on OPS/roof

Lamp sealing: IP69K
Light output (per light): 1200 lumens
LED color temperature: 5000 K
Amp draw (per light): 1.4 amps
6 LEDs per light
Aluminum housing

Compatibility

Model Year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
Model Year 2018 to current XUV835 and XUV865 Utility Vehicles
Model Year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
HPX Utility Vehicles

Tail Light Protectors - BM22773

Brake and taillight protector

The brake and taillight protector offers increased protection to the taillight assembly from incidental contact.

Mirrors

Rear View Mirror - BM26477

Rearview mirror

Key features

Convex mirror reflects a wide-angle image to help the operator see behind the vehicle
Connected to ball stud for easy adjustment

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Side Mirrors (open station & cab doors) - BUC10310

Side mirrors – open station

Side mirrors – cab door

Key features

Kit allows mirrors to be installed on either an open-station or cab vehicle
Mirrors can be easily adjusted based on operator preference

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Operator''s Station

Accessory mount bracket - BUC10176

Accessory mounting bracket (shown with tablet and cell phone mount)

Key features

Allows the cell phone and tablet mount to be installed in the upper dash location
Required for cell phone mount if mounted in the lower dash location

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Sun Visors (2) - BM26478

Visors (shown on R-spec)

Key features

Shades occupants from the glare of sunlight
Hinged design
Tan color
Kit includes left and right visor. Rearview mirror kit required for installation.

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Tablet mount - BUC10175

Tablet mount – upper mount location (shown with cell phone mount – sold separately)

Tablet mount – lower mount location (shown with cell phone mount – sold separately)

Key features

Keeps tablet at the operator’s fingertips for doing jobs such as soil sampling
Utilizes a RAM® mount to easily move tablet to desired location

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

RAM is a trademark of National Products, Inc.

Radio

Base radio kit - BUC10615

Lower left speaker

Lower right speaker

Head unit (sold separately) installed

Key features

Kit includes:
- Wiring harness
- AM/FM antenna
- Head unit mounting bracket
- Two 13.3-cm (5.25-in.) speakers
Jensen® speakers
- Waterproof
- 45-W root mean square (RMS) power each
- 135-W peak power each
The head unit is sold separately through Parts. The operator must choose one of the following three head units to complete the stereo:
- SWJHD1130 – heavy-duty stereo with AM/FM, weatherband, and auxiliary input
- SWJHD1635BT – heavy-duty stereo with AM/FM, weatherband, auxiliary input, SiriusXM® satellite radio, and Bluetooth® wireless technology
- SWJHD36AMIC – heavy-duty stereo with AM/FM, weatherband, compact disc (CD), auxiliary input, SiriusXM satellite radio, USB 2.0, and Bluetooth wireless technology

NOTE: Must order head unit through Parts.

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Jensen is a trademark of Electronics Trademark Holding Company LLC. SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc.

Premium speaker kit - BUC10619

Upper speakers

Subwoofer

Bluetooth® microphone

SiriusXM® Radio antenna/tuner

Key features

Kit includes:
- Wiring harnesses
- SiriusXM® radio antenna/tuner (XM ready head unit required – sold separately)
- Two 13.3-cm (5.25-in.) upper speakers
- Subwoofer
- Bluetooth® wireless microphone
Jensen® speakers
- Waterproof
- 45-W root mean square (RMS) power each
- 135-W peak power each
Jensen subwoofer
- Waterproof
- 20.3-cm (8-in.) amplified subwoofer
- Maximum power: 200 W
- Aluminum mesh grille
- Aluminum housing
The head unit is sold separately through Parts. The operator must choose one of the following two head units to complete the stereo:
- SWJHD1635BT – heavy-duty stereo with AM/FM, weatherband, auxiliary input, SiriusXM satellite radio, and Bluetooth technology
- SWJHD36AMIC – heavy-duty stereo with AM/FM, weatherband, compact disc (CD), auxiliary input, SiriusXM satellite radio, USB 2.0, and Bluetooth technology

NOTE: Must order head unit through Parts.

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Requires base radio kit

SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc. Jensen is a trademark of Electronics Trademark Holding Company LLC.

Roof

Roof Headliner - BUC10550

Roof headliner

Roof headliner installation

Key features

Enhances the appearance of the operator station with a molded, soft-touch, automotive-style roof headliner
Made from 3.175-mm (1/8-in.) thick sound-dampening material for improved occupant comfort
Easily attaches to the roof with cap screws and push darts

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Seat

Bench seat cover (black) - LP68162

Bench seat cover

Modular Lightweight Load-carrying Equipment (MOLLE) attachment location

Key features

Protection for the bench seat from wear and stains
Constructed with military-grade Cordura® fabrics
Quick and easy installation
MOLLE attachment locations (MOLLE attachments available through Order Zone)
Easy access to seatbelts

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Ordering information

Available through Order Zone

Cordura is a trademark of INVISTA North America S.à.r.l.

Bench seat cover (camo) - LP68420

Bench seat cover (yellow) - LP68149

Bench seat cover

Key features

Protection for the bench seat from wear and stains
Elastic-hem cord closure for easy adjustment
Easy access to seatbelts

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Ordering information

Available through Order Zone

Seat-Belt Comfort Strap (2) - BM26583

Comfort straps

Kit includes two comfort straps for the left and right seat belts.

Provides relief to the operator's and passenger's upper body when driving over rough terrain by allowing the seat belt to stretch when the seat belt locks
Moves the upper mounting point of the seat belt down 6 in. (152 mm)
Can be mounted to both the driver- and passenger-side upper mounting point of the three-point seat belt
Compatible with all model year 2017 - current Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, and RSX860i Utility Vehicles when equipped with standard Occupant Protective Structure (OPS)
Compatible only with standard Occupant Protective Structure (OPS), for deluxe cab frame, order BM22703

Speed Control

Speed Limiter - BM26262

Speed limiter

Key features

Mounts directly in the glove box
Limits speed to 42 km/h (26 mph) in the ON position
Vehicle has full acceleration and work capability between 0 and 72 km/h (0 and 45 mph) when the speed limiter is in the OFF position
Controlled with a key that can be removed in the ON or OFF position
Two keys per kit

Compatibility

Model year 2018 to current XUV835 Utility Vehicles

Sprayers

Sprayer Conversion Kit - LP68195

Storage

Gator Toolbox - LP19886

Gator toolbox shown on TH 6x4 with deluxe cargo box

Gator toolbox - open

Quality constructed from 16 gauge steel, this industrial tool box is durable enough to handle wear and tear even from the toughest contractors. This tool box keeps tools, equipment, and other valuables secure, clean, dry, and protected from outside elements - due to full weather seal locks and a rust-resistant, powder-coat paint application. Twin commercial-grade gas shocks automatically lift lid for effortless one-handed open/close. Comes complete with key locks to guard against theft.

Product attributes:

Two lids hinged at the middle allows access from both sides of the vehicle
Extra-wide lid opening allows easy access to tools and valuables
Key locks guard against theft (two keys provided)
Compatible with Gator TX, TH, TE, XUV 625i, XUV 825i/E/M, XUV 825i/E/M S4, XUV 855D/E/M, and XUV 855D/E/M S4, XUV835E/M/R, XUV865E/M/R Utility Vehicles equipped with the deluxe cargo box as shown in the picture above
Also compatible with Model Year 2018 and newer HPX615 and HPX815

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

Gator tool box
Order number: LP19886

Label kit for toolboxes (Camo) - BM26219

Label kit for toolboxes (Olive & Black) - BM26218

Side Opening Toolbox - BM26160

Side-door opening toolbox

This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.

Side-door opening toolbox features:

125-L (33-gal.) sealed storage
Heavy-gauge sheet metal
D-rings for tie downs
Fully sealed lockable latch
Sealed door
Door can also be used as a work bench when down
Can be mounted on either side of the cargo box

	Side-door opening toolbox
Toolbox weight	29 kg (64 lb)
Toolbox capacity	34 kg (75 lb)
Toolbox dimensions	-Full box: 109.4-cm (43.1-in.) long X 35-cm (13.8–in.) wide X 32.5-cm (12.8–in.) tall -125-L (33-gal) total volume

The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.

The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:

BM26220 – green and yellow
BM26218 – olive and black
BM26219 – camo

This toolbox is compatible with the following Gator™ Utility Vehicle models:

TX
TX Turf
TE
TH
XUV625i
XUV825i/E/M
XUV825i/E/M S4
XUV855D/E/M
XUV855D/E/M S4
XUV835E/M/R
XUV865E/M/R
Model Year 2018 and newer HPX615 and HPX815

Tailgate w/ brake and tail lights for toolboxes - BUC10393

Tailgate with brake lights and taillights

This tailgate kit with brake lights and taillights is specifically designed for compatibility with the top and side-door toolboxes (BM26162 and BM26160).

The tailgate can be installed in minutes once the toolbox and tail lights are installed by bolting them to the tailgate bracket.

Optional label kits are designed to fit with this tailgate:

BM26220 – green and yellow
BM26218 – olive and black
BM26219 – camo

The tailgate is compatible with the following Gator™ utility vehicle models:

TX
TX Turf
TE
TH
XUV625i
XUV825i/E/M
XUV825i/E/M S4
XUV855D/E/M
XUV855D/E/M S4
XUV835E/M/R
XUV865E/M/R
Model Year 2018 - current HPX615 and HPX815

Top Opening Toolbox - BM26162

Top-door opening toolbox

This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.

Top door opening toolbox features:

125-L (33-gal.) sealed storage
Heavy-gauge sheet metal
D-rings for tie downs
Fully sealed lockable latch
Sealed door
Toolbox divider
Removable tool tray
Can be mounted on either side of the cargo box

	Top door opening toolbox
Toolbox weight	32.7 kg (72 lb)
Toolbox capacity	32.7 kg (75 lb)
Toolbox dimensions	-Tray: 27.4-cm (10.8-in.) long x 21.8-cm (8.6-in.) wide x 7.1-cm (2.8–in.) deep -Left-hand side compartment: 46.2-cm (18.2–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9–in.) tall -Right-hand side compartment: 62.7-cm (24.7–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9-in.) tall -125-L (33-gal.) total volume

The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.

The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:

BM26220 – green and yellow
BM26218 –olive and black
BM26219 – Camo

This toolbox is compatible with the following Gator™ Utility Vehicle models:

TX
TX Turf
TE
TH
XUV625i
XUV825i/E/M
XUV825i/E/M S4
XUV855D/E/M
XUV855D/E/M S4
XUV835E/M/R
XUV865E/M/R
Model year 2018 and newer HPX615 and HPX815

Tracks

Camso Tracks (Gas) - LP65667

Tracks

Key features

Improves flotation and traction
All season capability – ideal for snow, mud, and marsh
Easily switch between tracks and wheels

Compatibility

Model year 2018 to current XUV835 Utility Vehicles

Ordering information

Available through Order Zone

Turn Signals

Front Turn Signal Light Kit - BUC10608

Front turn signals

Rear signal lights (taillight protectors not included)

Hazards switch (top)

Turn signal switch (right)

Key features

Kit includes:

Front/rear turn signals
Hazards
Backlit switches

NOTE: Not intended for use on public roadways.

Compatibility

Compatible with all model year 2011 to current Gator™ XUV825 and XUV825 S4 Utility Vehicles

Also requires turn signal light harness kit

Compatible with all model year 2011 to current Gator XUV625i, XUV855, and XUV855 S4 Utility Vehicles

Also requires turn signal light harness kit

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Electrical harness requirements

XUV835/865	Attachment harness required (see below)
M (open station)	2
M (cab, factory installed)	2
R	---

1	E-spec attachment harness
2	Front attachment harness
3	Roof attachments harness
4	Front cab harness
5	Rear cab harness
6	Dash port harness

Winch

WARN ProVantage 2041 kg (4500 lb) Winch - BM26251

2041.2-kg (4500-lb) winch (chassis mounted)

Plug-in remote

Key features

Impressive pulling capacity of 2041.2 kg (4500 lb)
Equipped with a water-resistant contactor that supplies the amperage required for higher pulling capacities
Includes a 3-m (10-ft), water-resistant, plug-in remote for safe distance operation that plugs directly into the glove box
15 m (50 ft) of 5.6-mm (7/32-in.) synthetic rope with hawse fairlead. Synthetic rope does not develop sharp burrs like steel rope and does not store as much potential energy when under load.
Ergonomic clutch handle
Limited lifetime, 3-year electrical (North America) warranty offered through WARN

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles
M-spec and R-spec vehicles come from the factory winch ready, and no additional attachment harnesses are required.
Requires winch mounting kit to mount the winch either on the chassis or on the front/rear receivers

Electrical harness requirements

XUV835/865	Attachment harness required (see below)
E	1

1	E-spec attachment harness
2	Front attachment harness
3	Roof attachments harness
4	Front cab harness
5	Rear cab harness
6	Dash port harness

WARN is a trademark of WARN Industries, Inc.

Winch Accessories Kit - BM21392

Winch accessories kit

Double the pulling power, change the pulling direction, and keep the winch in proper working order.

The accessories kit is essential gear for operators getting the most out of their winch:

Effectively anchors to trees/boulders
Change the pulling direction
Double the pulling capacity

The accessories kit includes:

Flexible tree strap
Snatch block
Shackle

Each kit comes in a black Cordura® heavyweight-nylon soft case.

Cordura is a trademark of INVISTA.

Wireless Winch Remote - BM26662

Wireless winch remote

Wireless winch remote mounted on XUV835

Key features

Wirelessly control winch from up to 15 m (50 ft) away
Weatherproof transmitter has two large buttons, making it easy to operate even while wearing gloves
Colored light-emitting diode (LED) lights provide clear operator feedback
Kit includes wireless transmitter, receiver, holster, wiring, and mounting hardware

Compatibility

Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
Model year 2018 to current XUV835 and XUV865 Utility Vehicles