X390 LAWN TRACTOR 54 IN
Lawn Tractor with 54-inch Deck
- 23-hp (17.2-kW)* iTorque™ Power System
- 54-in. Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
- Power two-wheel steer
- 4 year/300 hour bumper-to-bumper warranty
Apply For Financing BUILD YOUR OWN
View Product Brochure
Features
The tractor is powered by a John Deere iTorque™ power system, a combination of engine features and an exclusive hood design that provide superior lugging ability, even cooling, and durability.
A 22-hp (16.4-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions.
Key engine features include:
- 22 hp (16.4 kW)
- Large 726-cc displacement
- V-twin air-cooled design that provides smooth, quiet power
- Quality features include:
- Cast-iron cylinder liners
- Overhead valves
- Full-pressure lubrication
- Replaceable oil filter
- Dual-stage air cleaner V-twin design:
- Excellent power and performance
- Easy starts
- Smooth operation
Flywheel alternator
A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:
- 15-amp capacity
- Regulated to keep the battery at full charge without risk of overcharging
Fuel tank has large, 3.3-U.S. gal. (12.5-L) capacity
Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:
- Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
- Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.
- Located on the left fender
- Helps eliminate spillage
- Electronic fuel gauge on the dash display allows the operator to easily monitor the amount of fuel in the tank.
The 54-in. (137-cm) Accel Deep Deck uses the latest in three-spindle mowing technology to raise performance to a higher level:
- 10-gauge, 0.135-in. (3.4-mm) deck stamping for long life
- Deep, flat-top deck design to handle a large volume of material at faster mowing speeds
- Gives excellent cut quality and uniform discharge
- Easy to keep clean on top of and under the deck
- Resilient four-point mounting system suspends mower from tractor for a smooth and level cut
- Wide mower wheels easily adjusted just above ground level to help prevent scalping
- 0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height
- Onboard deck-leveling system makes keeping mower properly adjusted easy
- Compatible with optional MulchControl™ mulching system
- Compatible with high-performance Power Flow™ material collection systems
- For use on X380, X384, X390, X394, X570, X580, X584, and model year 2016 X590 Tractors
The 54-in. (137-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds:
- 4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
- Optional lever-action or electric one-touch MulchControl attachment provides superior mulching performance and versatility.
- Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
- Mower deck is suspended from the vehicle for a smooth and level cut
- Adjustable mower wheels, positioned just above ground level, help reduce scalping
Excellent cut quality
Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:
- Reducing the amount of re-cutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
- Helps maintain excellent cut quality at faster mowing speeds
- Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
- Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal re-cutting, and an even distribution of clippings.
Productivity - getting the job done fast
Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of re-cutting so more power is available to process incoming grass:
- Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds
Large discharge opening is both high and wide to handle more material:
- Gives a smooth, even discharge of clippings at all mowing speeds
- Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
- The 54A Power Flow blower has an inlet housing with over 20 percent greater area than the 54X Power Flow blower used on previous machines.
Cleanliness - for the mower and the operator
The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:
- There are few places to catch and hold material on top and underneath the deck.
- Top of deck stays cleaner, reducing time and effort needed for cleaning and service
- Underside of deck is self-cleaning to maintain optimum performance without build-up of material to interfere with the flow of air and clippings
- Less need to clean and remove build-up of material from underside deck
- The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck:
- Limited amount of material to drift onto the operator and mower deck
- Even for material discharged out the chute, less re-cutting results in larger pieces that are less likely to end up on the operator
- Mulching prevents the discharge of material completely and a MulchControl attachment makes mulching a practical solution for most mowing situations.
Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:
- The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
A wash port is provided to make cleaning the underside of the mower deck easy.
- Hose connector is included with the mower deck.
How MulchControl works
MulchControl is an innovative, simple design that is easy to use and maintain:
- The MulchControl attachment includes baffles to control the flow of material under the deck.
- The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulch and side-discharge modes.
- When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
- When the MulchControl baffle is closed, the material stays within the deck and gets chopped into mulch and deposited in the turf.
Superior durability is designed in
The 54A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:
- Ribs in the deck shell add strength where it is needed.
- The 54A has a 3 percent heavier overall weight than the Edge™ Xtra 54-in. (137-cm) mower deck used on previous machines.
Mower wheels are heavy duty:
- Provides greater strength and durability for longer, trouble-free life.
- Setting wheels to the correct height for the cutting height quick and easy.
Low-tension belt-drive design reduces the side load on engine lower bearings and mower deck bearings for longer life.
The 54A Mower Deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.
Dual-stage E-coat and powder-paint coatings provide extra protection from rust.
Versatility - easy to change between side discharge, mulch, and bagging modes
The 54A Mower is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:
- With an optional MulchControl attachment installed (along with the special mulching blades), changing from mulch mode to side discharge mode or vice versa is done with the simple flip of a lever or touch of an electric switch.
- The Power Flow rear bagger can be used with the MulchControl attachment and blades installed by simply using the MulchControl lever or electric one-touch switch to move the MulchControl baffle to the side-discharge position.
MulchControl option
A MulchControl attachment for the 54A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:
- A beautiful looking lawn
- Grass clippings not blown onto the operator, driveways, or flower beds
- Less fertilizer use
- Elimination of the effort needed to dispose of clippings
7-bu (247-L) Power Flow rear bagger
An optional 7-bu (247-L) rear bagger material collection system (MCS) is available. It provides an efficient means of collecting grass clippings and leaves:
- The Power Flow blower and chute are easy to install. The Power Flow blower swings out for easy cleanout and cleanup.
- The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:
- 7-bu (247-L) capacity
- Easy-to-attach Power Flow blower (ordered separately)
- Easy-to-attach chute (ordered separately)
- Air exhaust duct
- Convenient spring-latch
- Airflow fill indicator
- Quik-Tatch mounting
- Sealed hopper top
- Loose-knit bags available
Larger 14-bu (493-L) and 19-bu (670-L) MCS are available, in addition to the 7-bu (247-L) MCS, for specific X300 and X500 Series Tractor models.
- For the lever-action MulchControl attachment, the MulchControl lever on top of the mower deck is used to engage or disengage mulch mode.
- The operator is required to get off of the tractor in order to engage or disengage mulch mode with the lever-action system.
- For the electric one-touch MulchControl attachment, the electric switch on the tractor dash is used to engage or disengage mulch mode.
- Changing from mulch mode to side discharge mode or vice versa takes only a few seconds.
MulchControl is well-suited to the following mowing situations:
- Usually mulch, but side discharge when grass gets too long
- Usually side-discharge, but would like to be able to close the chute to control clippings
- Always mulch a main lawn, but often side discharge secondary lawns
- Bag clippings, but want to go farther before emptying bags
MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging or bagging when needed.
While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
- When cutting strong southern grasses, such as Zoysia and Bermuda
- When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
- When optimum bagging and lawn clean-up is desired
An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere X300 Series Tractors.
- The warranty is hassle free, with one company handling all of the paperwork.
- Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.
*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.
Hydraulic power steering is standard equipment:
- Provides effortless, automotive-like control
- Reduces operator fatigue and increases productivity
- Enables a tight turning radius for great maneuverability
- Adjustable-tilt steering wheel for optimum operator comfort (X390 and X394 Tractor)
Hydraulic lift system is easy to operate
The hydraulic lift control lever is positioned on the dash near the steering wheel for quick, easy, and precise fingertip control of equipment. Implement float, which allows an implement to follow the ground contour, is built into the lift linkage.
Lever-action or electric one-touch MulchControl attachment is available for Accel Deep™ 42-in. (107-cm) (42A), 48-in. (122-cm) (48A), and 54-in. (137-cm) (54A) Mower Decks used on X300 and X500 Select Series™ Tractors.
MulchControl advantages and benefits
MulchControl enhances versatility and productivity. A mower deck equipped with MulchControl not only does an excellent job of mowing and mulching, but it can also be quickly converted from side discharging to mulching or vice versa:
- In mulch mode, it controls clippings dispersion in unwanted areas (driveways, landscape beds, near buildings, windows, parking lots, etc.).
- Reduces cleanup time needed to dispose of clippings.
- Reduces the amount of material entering a material collection system because, even in the side discharge mode, MulchControl will mulch about one third of the material due to the additional baffles under the mower deck and the unique design of the mulching blades.
Electric MulchControl has the additional advantage of being controlled from the tractor seat by a switch on the dash to operate an electric actuator that moves the baffle to close off the discharge area of the mower deck.
- Operators can convert between modes without interrupting the mowing process, making it practical to change between modes as conditions require.
- When approaching clean areas like driveways or flowerbeds where clippings would be undesirable
- When a breeze might blow clippings back onto the operator
- For side discharge mowing only the areas of the property where grass is too thick for mulching
- With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching
- With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.
- Models equipped with a 42A Mower Deck require a MulchControl baffle be removed to install the bagger chute; see 42A Mower Deck versatility explanation for more information.
- Changing from one mode to the other takes only a few seconds.
How MulchControl works
A mower equipped with a MulchControl attachment delivers unprecedented levels of productivity and versatility. The operator has the ability to quickly change between side discharging and mulching. A heavy-duty baffle opens and closes to convert the mower from side discharge mode to mulch mode or vice versa.
MulchControl is an innovative, simple design that is easy to use and maintain:
- The MulchControl attachment includes baffles to control the flow of material under the deck.
- When the MulchControl baffle is open, most of the material flows freely out the discharge deflector or into a material collection system.
- When the MulchControl baffle is closed, material stays within the deck and gets chopped into mulch and deposited in the turf.
MulchControl is well-suited to the following mowing situations:
- For operators who usually mulch, but side discharge when grass gets too long
- For operators who usually side discharge, but would like to be able to close the chute to control clippings in some areas
- For operators who always mulch a main lawn, but often side discharge secondary lawns
- For operators who collect clippings, but want to go farther before emptying the material collection system
MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging when desired.
Advantages of MulchControl include:
- Performance is improved.
- Mulching is beneficial because it returns the clippings to the ground as fertilizer, which promotes lawn growth.
- Clippings are much smaller, which allows them to fall into the grass and be removed from view.
- Unsightly grass clippings are not blown onto driveways or into flower beds.
- Fertilizer use is reduced and provides associated environmental benefits.
- Uptime is increased.
- Operators can convert quickly between modes, making it possible to change between mulching and side discharging as conditions require.
- Mulching heavy, thick material can significantly reduce mower productivity. The ability to switch from mulch to side discharge mode ensures productivity, especially in grass too tall or thick to mulch effectively.
- Cost of operation is reduced.
- Controlling clipping dispersion reduces cleanup time.
MulchControl limitations
While in the side discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
- When cutting strong southern grasses, such as Zoysia and Bermuda
- When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
- When optimum bagging and lawn cleanup is desired
- 42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute
MulchControl compatibility
Each MulchControl attachment includes everything needed: baffles and mulch blades for all attachments, and the actuator, wiring, and switches for the electric one-touch attachments.
Lever-action MulchControl attachments
Attachment number | Description | Applications |
BM24794 | 42A MulchControl (lever action) | X300 Series Tractors, Z300 Series ZTrak™ Mowers |
BM24993 | 48A MulchControl (lever action) | X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers |
BM24994 | 54A MulchControl (lever action) | X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers |
Electric one-touch MulchControl attachments
Attachment number | Description | Applications |
BUC10164 | 42A electric one-touch MulchControl | X300 Series Tractors* |
BUC10165 | 48A electric one-touch MulchControl | X300 and X500 Series Tractors* |
BUC10166 | 54A electric one-touch MulchControl | X300 and X500 Series Tractors* |
* NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.
An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.
Equipment available for snow removal includes:
- 44-in. (112-cm) Snow Blower
- 44-in. (112-cm) Front Blade
- 48-in. (122-cm) Front Blade (X394 Tractor only)
- Tire chains or TerraGrip traction belts
- Weather enclosure (available for all X300 Series, except the X350R)
- Weights
The Tuff Torq® hydrostatic transaxle encloses the hydrostatic pump and motor rotator groups in the same housing with the differential and axle housings. This design is very efficient and reduces the number of sealing surfaces to minimize the potential for leakage.
Combined with the foot controls, the hydrostatic transmission functions similarly to that of an automatic transmission in an automobile, so the term automatic is often used to describe it:
- Use of the latest valve designs has significantly reduced the sound level.
- Large pump and motor rotating groups ensure long life and efficient operation.
Freewheeling valve
A freewheeling valve control is conveniently located near the tractor rear hitch plate for good visibility and easy operation.
Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Manufacturing Company.
The contoured dash has clean, attractive styling and ergonomic controls for easy use:
- Controls are color coded for easy identification by the operator.
- Controls are logically placed and easy to reach.
- The power take-off (PTO) switch allows the operator to get fingers underneath it, like a T-handle, to pull up for easy activation.
- The reverse implement option (RIO) switch is a yellow button.
- The hydraulic-lift control and the park brake latch are pivot levers for low effort.
- Cruise control activation is handled by an automotive-style button.
- Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.
- The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.
Functional design of the throttle and choke controls provides good appearance and a comfortable feel.
- The hydraulic-lift control and the park brake latch are pivot levers for low effort.
- Cruise control activation is handled by an automotive-style button.
- Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.
- The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.
- Functional design of the throttle and choke controls provides good appearance and a comfortable feel.
- Power steering takes the work out of turns.
- Tilt steering wheel adjusts for operator comfort (X390, X394).
Display panel
Instrument display has the look and feel of a modern automobile. A power-up sequence cycles lights and gauges to indicate they are working:
- Display features dark-cockpit design to minimize operator distractions.
- Display is back lit for night visibility.
- Night visibility is especially useful with snow blower use.
- Hour meter makes it easy to tell when oil changes and other maintenance should be performed.
- Electronic fuel gauge provides real-time fuel level information.
- A tachometer graphically displays engine speed.
- Target-zone graphics inform the operator of the engine speed range to use for best cut quality.
- An indicator tells the operator when the PTO is operating.
- Bright caution and stop lights capture the operator's attention when important information is on the instrument cluster.
- Damage can be prevented and repair costs reduced by addressing problems early.
- Operators are advised of what the problem is if they attempt to operate the mower with unsatisfied PTO, seat, or park brake interlocks.
- The indicators are also useful to identify the reasons the PTO or engine may have shut off when an interlock is unsatisfied.
- Operators are advised if battery voltage is low, normal, or excessive.
- The service indicator light illuminates to indicate a diagnostic error code is stored.
- Onboard diagnostics provides trouble codes for use by trained technicians.
- For example, a technician will be able to test switch functionality and circuit continuity without tools.
- Onboard diagnostics provides trouble codes for use by trained technicians.
Twin Touch™ foot control
Twin Touch foot pedals control the speed and direction of travel:
- Automotive-type accelerator control ensures easy operation.
- Operator can change direction without lifting foot off the platform.
- Large pedal surface gives superior operator comfort.
Cruise control
Cruise control is standard equipment:
- To engage, push the cruise-control button and hold until the foot is removed from the forward pedal.
- For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.
Mower deck height adjustment
A rotary dial knob makes adjusting the mower cut height quick and easy:
- Provides mower cut heights in 0.25-in. (6.4-cm) increments from 1 in. (2.5 cm) to 4 in. (10.2 cm)
- Returns the mower deck to the same preset height each time it is lowered
Storage for the onboard deck-leveling gauge and the Exact Adjust tool is provided in the storage tray under the tractor’s seat.
- Exact Adjust ports allow for easy and accurate leveling of the mower deck for optimum mowing performance.
Deck-leveling gauge is placed at the appropriate location under the left rear, right rear, and front of the mower deck as the cut height is adjusted using the Exact Adjust tool and front draft arm adjusting nuts.
Parking brake control
Depressing the brake pedal applies internal wet-disk brakes (increased durability and longer life) for safe stopping.
A parking brake control is conveniently located for easy access; it holds the brake pedal securely in locked position.
Electric power take-off (PTO) clutch is easy and convenient to use
The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.
Heavy-duty PTO clutch
The PTO clutch is designed to operate through many on/off cycles.
Reverse implement option (RIO)
Using RIO
CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:
- Carefully check the area around the machine.
- Disengage the mower before backing up.
NOTE: Operating the mower while backing up is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.
- Stop forward travel. Allow attachment to run.
- Look down and behind the machine to be sure that there are no bystanders.
- Push and hold in the reverse implement switch while depressing the reverse pedal slightly.
NOTE: If the attachment stops while positioning the machine, return mower engagement (PTO) switch to off position. Repeat this procedure from the beginning. - Release the reverse implement switch and reposition the machine as the machine begins to move rearward.
- Resume forward travel. The attachment should continue operating.
- Repeat procedure to position the machine again.
The frame is made of heavy formed and welded steel, reinforced in critical areas for even greater strength:
- The frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material for long life.
- Standard front bumper and hitch plate are formed from 9-gauge, 0.15-in. (3.8-mm) steel and complete the frame assembly.
- Rear hitch plate can support two 42-lb (19-kg) Quik-Tatch weights.
- Weight bracket is built into the frame of two-wheel-steer models.
- Four-wheel-steer models require the optional weight bracket.
Front axle and wheel spindles are heavy-duty
Front axle is made of nodular cast iron:
- Cast-iron front axle is strong and shock-resistant.
- Cast iron will not yield under heavy loads or impact.
A replaceable bushing is used at axle mounting:
- The bushing provides excellent wear resistance.
- Grease fittings at each spindle are easy to service.
Front steering spindles
Front steering spindle diameter is 0.75 in. (19 mm) for strength and long life:
- Have strength to handle heavy implements
- Provide long life at bearing surfaces
- Use sealed precision bearings in front wheels
Rear equipment-mounting system is heavy-duty and easy to use
A heavy-duty equipment mounting system is used:
- Includes strong frame mounts with a combination of mounting holes in the tractor hitch plate that accept pins or shoulder bolts to support heavy rear-mounted equipment.
- Easily attach optional equipment to the tractor
- Can bear the load of heavy rear-mounted equipment, such as material collection systems
Smooth, rounded contours present a modern, styled appearance:
- Hood styling incorporates efficient full-length air-intake louvers on each side, rather than on the top.
- Cooler engine operation
- Lower operator station sound levels
- Hot air is vented out the front grille, away from the operator.
- The fully enclosed hood is made of molded-in-color material.
- Reduces sound
- Will not rust or dent
- Distinctive grille and large, one-piece fender deck complete the styling package.
Two high-quality headlights give excellent visibility
Headlights are standard equipment on all models:
- Two 27-W bulbs provide excellent lighting for good visibility during evening operation.
- A headlight position on the ignition switch makes it easy to operate the headlights.
- The headlights are designed to provide an optimum lighting pattern for mowing and snow removal.
The operator station is designed for operator comfort and ease of using controls:
- A large, 14-in. (36-cm) diameter steering wheel is comfortable to use and minimizes steering effort.
- Full-length foot mats provide comfort for the operator and protect the footrest area.
Comfortable seat
An open-back 15-in. (38-cm) high-back seat provides a comfortable, smooth ride and good support for the operator:
- Seat travel of 7 in. (18 cm) with 15 positions allows the operator to be seated comfortably and easily operate the controls.
- Seat can be easily adjusted fore and aft by the operator while sitting on the seat.
- Open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride.
- Grasp at the top of the seat is conveniently located for use when tilting the seat up to protect it from the weather.
Seat suspension
The seat suspension is adjustable, without tools, for the weight of the operator:
- Springs are adjustable fore and aft to any of three positions.
- No tools require
- Allows fine-tuning of the suspension for the operator's weight
- Back position for more support for heavier operators
- Tool tray is designed into the seat base.
- Can be used to store gloves, small tools, etc.
- Provides storage location for Exact Adjust tool and deck-leveling gauge (tool and depth-leveling gauge not shown in photo)
Cup holder
A cup holder and tool tray are located on the fender for operator convenience:
- The cup holder holds a variety of container sizes.
- Tool tray provides convenient storage.
- Cup holder and tool tray are constructed of durable acrylonitrile butadiene styrene (ABS) plastic.
Removable plug for optional 12-V outlet
A removable plug on the console, in front of the operator, provides a convenient location for the optional 12-V outlet and makes installation easy.
- Convenient for plugging in cell phone charger and other electric devices
- Can be used to operate electric rear equipment, such as a sprayer or spreader
12-V fast connector
A mid-vehicle, 12-V fast connector, located under the tractor’s fuse box, is included as standard equipment to reduce initial installation time for some attachments that operate on 12-V power from the tractor:
- The four-cavity connector includes battery, ground, and key switch terminals and is turned on and off with the ignition switch.
The one-piece hood opens easily to permit checking and servicing the engine:
- Important service points are located within easy reach.
- A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.
- The high-quality engine used in the X300 Series does not require an 8-hour oil and filter change because improvements in the manufacturing process and quality of parts, components, and oils have eliminated the need for the short interval oil change requirement.
The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.
Exact Adjust ports and onboard deck-leveling tools make precise deck adjustments easy
A mower deck must be level side-to-side and properly adjusted front-to-rear to give the best cutting performance. A removable onboard deck-leveling gauge and a hex-key tool are provided to make adjustment easy. They are securely stored under the tractor seat.
Exact Adjust leveling ports are provided on each side of the operator platform above the mower-level adjusting bolts. With the hex-shaped tool, they provide convenient access to allow quick and easy adjustment of the mower for the best-cut quality of cut.
The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:
- There is no need to reach under the fender deck while making the mower-level adjustment.
- Onboard deck-leveling gauge, Exact Adjust ports, and the hex tool work together.
- Level the mower deck side to side
- Set the correct amount of rake (front-to-back deck orientation)
- Calibrate the cutting height to the cut-height adjusting knob setting
- Exact Adjust simplifies leveling the mower deck if equipped with a Power Flow™ blower.
- To give the best cut, mower level should be adjusted if alternately mowing with and without blower installed. The Exact Adjust feature makes this easy.
Consult the operator's manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:
- Park the tractor on a level surface.
- Inflate tires to the correct pressure.
- Consult the label for the cutting-height knob that is located on the console of the machine. This label shows deck-leveling position and location of deck-leveling adjustment points.
- Set mower cutting-height knob to the correct deck-leveling position.
- For X300 models, use position 2.75
- For all other models, use position 2.5
- Adjust mower wheels as necessary so they do not contact the ground surface.
- Remove the onboard deck-leveling gauge that is located under the seat.
- Using the Exact Adjust ports and tool, adjust mower deck side-to-side level so the deck-leveling gauge just slips under the left and right lower deck rim at the designated adjustment points. The location of adjustment points will vary slightly between decks.
- Left- and right-rear adjustment points are under the deck rim near the rear mower wheels, if equipped.
- Adjust mower deck front-to-back level, if necessary.
- Loosen rear nuts equally on each side of front lift rod.
- Turn front nut equally on each side clockwise to raise front of mower or counterclockwise to lower it until gauge just slips under the front adjustment point.
- Tighten rear nuts after adjustment is complete.
- Return the gauge to its storage position.
NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.
Keep a John Deere riding lawn mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.
Look for the MowerPlus app on the mobile device’s app store.
The app supports residential lawn equipment such as 100 Series, S240, X300, X500, X700, Z200 through Z600, and many similarly-sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.
NOTE: Some product image variation may exist.
Also available is the John Deere MowerPlus smart connector (sold separately).
The John Deere MowerPlus smart connector wirelessly links a Select Series™ X300 or X500 Tractor to the MowerPlus app on a mobile device. The smart connector transmits engine usage to the app, making it easy to track maintenance intervals. It also transmits the fuel level to the app—when thinking ahead about Saturday morning mowing, the operator can make sure the tractor is fueled and ready to go.
Specifications
Key Specs | x390-lawn-tractor-54-in Current Model |
---|---|
Engine power | 22 hp 16.4 kW |
Engine manufacturer/model | FS651V |
Transaxle type | K58 hydrostatic integrated with transaxle |
Transaxle control | Twin Touch™ pedals |
Rear tires | 22x11-10 |
Steering type | Power, hydraulic |
Lift system type | Hydraulic |
Cutting width | Accel Deep™ mower deck, 54 in. 137 cm |
U.S. warranty | 4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Engine | |
Power | 22 hp 16.4 kW |
Displacement | 44.3 cu in. 726 cc |
Manufacturer/model | FS651V |
Type | Overhead valve, full-pressure lube, oil filter |
Cylinders | V-twin, cast-iron liners |
Governor | Mechanical |
Choke/speed control | Separate levers, automatic choke return |
Cooling method | Air |
Air cleaner | Dry, replaceable with foam precleaner |
Oil drain | No tools |
Fuel system | |
Type | Gasoline |
Fuel delivery | Pulse pump, carburetor |
Fuel gauge | Gauge on dash |
Fuel tank location | Rear |
Fuel fill opening | On left fender, 3 in. 7.6 cm |
Fuel tank capacity | 3.3 U.S. gal. 12.5 L |
Electrical system | |
Battery | 12 V 340 CCA |
Charging system | Flywheel alternator, regulated, 15 amp |
Engine starter | Bendix |
Hourmeter | Yes |
Headlights | Two standard, incandescent, 27 W |
Taillights or reflector | No |
Backup lights | No |
Rear work lights | No |
12-V outlet | Optional |
Transaxle | |
Type | K58 hydrostatic integrated with transaxle |
Control | Twin Touch™ pedals |
Cruise control | Yes, button on dash |
Oil cooler | Fins and fan on transaxle |
Oil filter | Internal, not replaceable |
Differential lock | No |
Forward speed | 0-6.2 mph 0-10 km/h |
Reverse speed | 0-3.5 mph 0-5.6 km/h |
Brakes | Internal wet disc |
Chassis | |
Frame | Welded heavy-duty |
Primer/paint | E-coat/powder |
Weight bracket | Standard rear, optional front |
Receiver hitch | No |
Front axle | Cast iron front axle, front wheel ball bearings |
Spindle bushings | Metal, replaceable |
Front tires | 15x6.5-8 |
Rear tires | 22x11-10 |
Hood material | Molded-in color hood material reduces sound, will not rust or dent |
Fender deck material | Stamped steel |
Floor mats | Sure-grip rubber |
Storage | On fender and under seat |
Service interval decal | Yes |
Fender handles/grips | No |
Cup holder | Yes |
Equipment mounting | Yes, heavy duty |
Steering | |
Type | Power, hydraulic |
Four-wheel steer | Not available on this model |
Steering wheel | Large, 14 in. 35.6 cm |
Tilt steering wheel | Standard, five position |
Turning radius | 22 in. 55.9 cm |
Uncut circle radius | 22 in. 56 cm |
Seat | |
Type | Open-back design with grasp |
Seat back height | 15 in. 38.1 cm |
Armrests | No |
Fore-aft adjustment | While seated, slide rail, 14-position, 7 in. 17.8 cm |
Seat suspension | Tilt, two coil springs, three-position no-tools adjustment for operator weight |
Lift system | |
Type | Hydraulic |
Hydraulic outlets | No |
Mower cut height | 13 positions, 1-4 in. 2.5-10.2 cm |
Cut height increments | 0.25 in. 0.64 cm |
Preset cut height | Yes |
Mower deck | |
Type | Side discharge |
Cutting width | Accel Deep™ mower deck, 54 in. 137 cm |
Construction | Stamped steel deck shell |
Mower deck material | 10 gauge 0.135 in. 3.4 mm |
Mower wash port | Yes |
Mower drive system | Electric power take-off (PTO) clutch, in-line belt |
Mower wheels | Four |
Mower wheel adjustment | Seven-position, spring-loaded pin |
Mower level adjustment | Exact Adjust ports and onboard deck-leveling gauge |
Mower attachability | |
Type | Roll under tractor |
Front draft arms | Attached with spring pins at two points |
Rear draft arms | Quick-pull pins |
Mower wheels rotate | Yes, 90 degrees for easy mower removal |
Drive system | Dual belt |
Safety | |
Meets ANSI standard | Yes |
Meets OPEI standard | Yes |
Backup protection | Reverse Implement Option (RIO) |
Safety video | Yes |
Buyer's notes | |
Notes | Hydraulic power lift for superior convenience and ease of use Power steering with tilt steering wheel for exceptional maneuverability and comfort One-piece hood for easy service access, molded-in color hood material reduces sound and will not rust or dent |
Warranty | 4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Optional equipment | |
Mowers | 54A (standard) |
Rear bagger | 7, 19 bu 247, 670 L |
Powered material collection | Power Flow™ blower |
Mulching system | Yes, MulchControl™ |
Front thatcher | 38, 46, 54 in. 96.5, 116.8, 137.2 cm |
Front blade | 44 in. 111.8 cm |
Mid-mount blade | |
Snow blower | Two-stage, 44 in. 111.8 cm |
Rotary broom | |
Rotary tiller | |
Sleeve hitch | |
3-point hitch | |
Rear power take-off (PTO) | |
Plow, moldboard | |
Box scraper | |
Cultivator | |
Rear blade | |
Disk harrow | |
Landscape rake | |
Sprayer | Tow-behind, 15 U.S. gal. 56.8 L Tow-behind, 25 U.S. gal. 94.6 L Mounted, 25 U.S. gal. |
Spreader | Tow-behind, 125 lb 57.7 kg Tow-behind, 175 lb 79.4 kg Mounted, 125 lb |
Front bumper | Styled bumper option |
Brush guard | Yes |
Weather protection | Weather enclosure |
Sun canopy | Yes |
Rear receiver hitch | |
Bucket holder | Yes, double bucket |
Grass striping | Lawn striping kit |
Tractor shovel | 40 in. 101.6 cm |
Front loader | |
Other equipment | |
Tow-behind tools | 16 |
Dimensions | |
Height | 47 in. 120 cm |
Overall length | 72 in. 182.9 cm |
Wheelbase | 49.4 in. 125.5 cm |
Width with mower | 68.4 in. 174 cm |
Width with mower (deflector raised for storage) | 59.4 in. 151 cm |
Width without mower | 38.5 in. 97.5 cm |
Weight | Mower, no fuel, 686 lb 311 kg |
Accessories and Attachments
Carts
Every owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.
Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak™ or ZTrak™ mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck.
- The cart has a premium molded, high-density polyethylene box construction.
- Compression molding process allows polyethylene to be the optimum thickness in all areas for superior strength and durability.
- Polyethylene body will not rust or dent; it stays looking new longer.
- 0.75-in. (2-cm) x 2-in. (5-cm) stake pockets are molded in to make the addition of side extensions easy.
- Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
- Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
- Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
- Styling is compatible with other John Deere equipment.
- Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.
Wheels
Wheels are mounted on a solid, one-piece axle for durability.
Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.
The pneumatic tires offer the following:
- Good flotation
- Minimal rolling resistance
- Shock absorption
Sloped tailgate
A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
Tractor hitch
A large-diameter hitch pin provides plenty of strength:
- Fast, easy attachment to the tractor hitch
- Spring pin to ensure the pin stays in place
Tilt latch
An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.
Model comparison chart
Comparison with similar models
Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
Box capacity | ||||||||
Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
Box dimensions | ||||||||
Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
S240 | X | X | X | X | X | X | X | |
LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
LX280, LX280AWS, LX289 | X | X | X | X | X | |||
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
SST15, SST16, SST18 | X | X | X | |||||
G110 | X | X | X | X | X | X | ||
GT235, GT245 | X | X | X | X | X | X | ||
GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
Tractor | Additional weight |
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
7P Poly Utility Cart
Order number: LP21935
Oilite is a trademark of Beemer Precision, Incorporated.
The 8-cu-ft (0.23-m3), 300-lb (136-kg) capacity 8Y Convertible Poly Utility Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.
Key features include:
- Compatible with riding lawn tractors and garden tractors
- Durable poly construction
- All-terrain pneumatic tires
- Converts from tow cart to push cart without tools
- Large handle is provided for ease of use
Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.
Model comparison chart
Comparison with similar models
Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series |
8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
Box capacity | ||||||||
Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
Box dimensions | ||||||||
Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
S240 | X | X | X | X | X | X | X | |
LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
LX280, LX280AWS, LX289 | X | X | X | X | X | |||
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
SST15, SST16, SST18 | X | X | X | |||||
G110 | X | X | X | X | X | X | ||
GT235, GT245 | X | X | X | X | X | X | ||
GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
Tractor | Additional weight |
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
8Y Convertible Poly Utility Cart
Order number: LP22755
Oilite is a trademark of Beemer Precision, Incorporated.
Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.
Utility carts can be used to haul a variety of materials:
- Firewood
- Lawn debris
- Sand
- Dirt
- Mulch
- Garden tools
- Plants and bushes
The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:
- Large 650-lb (295-kg) capacity
- 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
- Will not dent or rust
- 15x6 tubeless pneumatic tires with turf tread for maximum traction
- Easy, hands-free foot pedal dump release
- Steep dump angle for complete emptying
A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.
Model comparison chart
Comparison with similar models
Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series |
8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
Box capacity | ||||||||
Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
Box dimensions | ||||||||
Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
S240 | X | X | X | X | X | X | X | |
LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
LX280, LX280AWS, LX289 | X | X | X | X | X | |||
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
SST15, SST16, SST18 | X | X | X | |||||
G110 | X | X | X | X | X | X | ||
GT235, GT245 | X | X | X | X | X | X | ||
GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
Tractor | Additional weight |
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
10P Poly Utility Cart
Order number: LPPCT10JD
Oilite is a trademark of Beemer Precision, Incorporated.
Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.
Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.
Welded box construction provides maximum reliability:
- Requires less setup time than the bolted construction.
- Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.
Wheels and tires
Wheels are mounted on a solid, one-piece axle for durability.
Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.
Pneumatic tires offer:
- Good flotation
- Minimal rolling resistance
- Shock absorption
Turf-tread tires are used on the 13 Utility Cart.
Deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.
Easy hookup and tilt-dump latch
A large-diameter hitch pin provides plenty of strength:
- Fast, easy attachment to the tractor hitch
- Spring pin to ensure the pin stays in place
The easy-to-use latch allows tilting the bed for easier unloading:
- Steep dump angle makes emptying easier.
Model comparison chart
Comparison with similar models
Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series |
8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
Box capacity | ||||||||
Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
Box dimensions | ||||||||
Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
S240 | X | X | X | X | X | X | X | |
LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
LX280, LX280AWS, LX289 | X | X | X | X | X | |||
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
SST15, SST16, SST18 | X | X | X | |||||
G110 | X | X | X | X | X | X | ||
GT235, GT245 | X | X | X | X | X | X | ||
GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
Tractor | Additional weight |
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
13 Utility Cart
Order number: LPHDC13JD
Oilite is a trademark of Beemer Precision, Incorporated.
The 17-cu-ft (0.48-m³), 800-lb (363-kg) capacity or 350 lb (158 kg) when using swivel feature to dump 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.
Key features include:
- Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants
- 800-lb (363-kg) capacity makes it durable enough for the heavy jobs
- 350 lb (158 kg) when using swivel feature to dump
- Convenient foot pedal release for easy dumping
- Molded stake pockets for enlarging the bed size
NOTE: Do not exceed 350 lb (158 kg) weight capacity when using swivel feature to dump.
Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.
Model comparison chart
Comparison with similar models
Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series |
8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
Box capacity | ||||||||
Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
Box dimensions | ||||||||
Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
S240 | X | X | X | X | X | X | X | |
LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
LX280, LX280AWS, LX289 | X | X | X | X | X | |||
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
SST15, SST16, SST18 | X | X | X | |||||
G110 | X | X | X | X | X | X | ||
GT235, GT245 | X | X | X | X | X | X | ||
GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
Tractor | Additional weight |
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
16YS Swivel Cart
Order number: LP68186
Oilite is a trademark of Beemer Precision Incorporated.
Every owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.
Utility carts can be used to haul a variety of materials:
- Firewood
- Lawn debris
- Sand
- Dirt
- Mulch
- Garden tools
- Plants and bushes
Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
Key features of the 17P Utility Cart:
- 1,000-lb (454-kg), 17-cu ft (0.48-m3) load capacity.
- Cart has premium molded polypropylene box construction.
- Polypropylene body will not rust or dent, staying new-looking longer.
- 0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.
- Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.
- Ribs in box bottom add strength and prevent a shovel from hitting bolts when emptying the cart.
- Sloped tailgate design makes emptying the box easier; no tailgate to loosen or remove.
- Styling is compatible with other John Deere equipment.
- 16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.
- Wheels are mounted on a solid one-piece axle.
- Wheels turn on iron/Oilite® bushings with grease fitting for long life.
- Spring-loaded dump latch is easy to use.
A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.
Model comparison chart
Comparison with similar models
Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series |
8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
Box capacity | ||||||||
Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
Box dimensions | ||||||||
Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
S240 | X | X | X | X | X | X | X | |
LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
LX280, LX280AWS, LX289 | X | X | X | X | X | |||
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
SST15, SST16, SST18 | X | X | X | |||||
G110 | X | X | X | X | X | X | ||
GT235, GT245 | X | X | X | X | X | X | ||
GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
Tractor | Additional weight |
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
17P Utility Cart
Order number: LPPCT17JD
Oilite is a trademark of Beemer Precision Incorporated.
Everyone who owns a John Deere riding lawn and garden product is a potential user of a high-quality affordable utility cart.
Utility carts can be used to haul a variety of materials:
- Firewood
- Lawn debris
- Sand
- Dirt
- Mulch
- Garden tools
- Plants and bushes
Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
Durable box design
Durable 18-gauge, 0.05-in. (1.2-mm) (10S) or 16-gauge, 0.06-in. (1.5-mm) (16S) steel components are bolted together.
Recessed bolts are used in the bottom of the box, so they will not interfere with emptying the cart.
Convenient emptying of box
The deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.
Model comparison chart
Comparison with similar models
Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series |
8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
Box capacity | ||||||||
Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
Box dimensions | ||||||||
Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
S240 | X | X | X | X | X | X | X | |
LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
LX280, LX280AWS, LX289 | X | X | X | X | X | |||
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
SST15, SST16, SST18 | X | X | X | |||||
G110 | X | X | X | X | X | X | ||
GT235, GT245 | X | X | X | X | X | X | ||
GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
Tractor | Additional weight |
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
18 Steel Utility Cart
Order number: LPHDC18JD
Oilite is a trademark of Beemer Precision, Incorporated.
Drawbar
1-7/8-in. (48-mm) hitch ball attaches to drawbar or rear hitch to allow towing. 0.75-in. (19-mm) diameter post thread is provided.
The hitch ball is available through Parts.
Fits John Deere lawn and garden tow behind attachments.
- Strong magnetic grip
- Rust resistant
- Easy to install, secure fit
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
Magnetic hitch pin
Order number: LP63768
Home Maintenance Kits
LG265 home maintenance kit
Home maintenance kits are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual.
The LG265 home maintenance kit includes the following:
Quantity | Description |
1 | Engine oil filter |
2 | Engine oil quart |
1 | Fuel filter |
1 | Air filter element |
1 | Air filter element foam |
2 | Spark plug |
Mcs Chutes
The Power Flow chute is required, along with the high-performance Power Flow blower, to use the 2-bag Power Flow material collection system. The chute includes a convenient handle and a fill indicator that tells the operator when the bags are getting full.
One chute works with several vehicle applications. Trim lines on the chute are referenced in the instructions so the chute can be cut to the proper length for the vehicle/mower application.
The Power Flow chute is required, along with the high-performance Power Flow blower, to use the MC519 Cart MCS.
Mcs Hoppers
The 7-bu (247-L) hopper provides an efficient means of collecting grass clippings and leaves using either the cut-and-throw rear bagger or the Power Flow material collection system (MCS):
- 38-in. (97-cm) and 42-in. (107-cm) mower decks use the cut-and-throw system.
- 48-in. (122-cm) and 54-in. (137-cm) mower decks use the Power Flow system.
The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags.
The 7-bu (247-L) MCS features:
- 7-bu (247-L) capacity
- Easy-to-attach lower chute (ordered separately)
- Handle on chute
- Air exhaust duct
- Convenient spring-latch
- Airflow fill indicator
- Quik-Tatch mounting
- Sealed hopper top
- Loose-knit bags available
A loose-knit bag is available as an option for use with 7-bu (247-L) cut-n-throw rear baggers and Power Flow™ baggers:
- Two loose-knit bags are required.
- The loose-knit bag allows more air to flow through and provide more complete bag filling in wet and heavy grass conditions.
The MC519 is compatible with Select Series™ X320, X324, X340, X360, X380, X384, X390, X394, X500 Series Multi-Terrain, X700 Series Tractors, GT200, GX300, X400, and X500 Heavy-Duty Garden Tractors, and 110 through 455 Garden Tractors.
NOTE: MC519 is not compatible with D100 Series, LA100 Series, L100 Series, 100 Series, or Select Series model X300, X304, X310, X330, X350, X354, X370 Tractors, LT, LX, or SST Lawn Tractors, or G100 or G110 Garden Tractors.
The MC519 is designed to provide the versatility of two products in one - a utility cart or a material collector.
Utility cart:
- 7.5 cu ft (212 L) heaped or 500 lb (227 kg) of capacity
- Ideal for hauling topsoil, gravel, sand, firewood, mulch, etc.
Collector:
- Large, 19-bu (23-cu ft, 670-L) capacity with a standard equipment cover
- Can be equipped with a Power Flow blower and chute for vacuuming grass clippings, thatch, pine needles, and leaves
Potential customers include homeowners, commercial operators, nurseries, and estates.
Easy to hook up and operate
The MC519 hitch can be connected to the tractor without tools in about one minute.
In combination with non-jackknifing caster wheels, this semi-rigid hitch makes it easy to maneuver the cart/collector.
An easy-to-reach handle allows dumping the cart/collector from the tractor seat.
For dumping extra-heavy loads, the operator can use the hand grip on the front of the box.
A standard equipment cover can be installed in a matter of seconds to convert the utility cart to a collector:
- Large plastic window in the cover allows the operator to see when the collector is full.
- Cover folds flat for space-saving wall storage.
Strong construction
The MC519 has the durability to handle homeowner or commercial applications:
- Steel support structure is mig-welded for strength.
- Cart box is made of strong, 18-gauge, 0.05-in. (1.2-mm) steel for durability.
- Puncture-resistant 4-ply rated (PR) turf tires are standard equipment.
- Greaseable bearings (wheels and casters) enable long life.
- Cover is made of tough 14-oz (397-g) black vinyl-coated nylon. The lower sides are made of 9.5-oz (269-g) black polyester knitted cloth.
Power Flow™ option (Power Flow blower and discharge chute must be ordered separately)
When equipped with the optional blower and discharge chute (ordered separately), the MC519 becomes a material collection system.
The blower housing material is high-density polyethylene and the fan material is ultra-high molecular weight polyethylene:
- Lightweight for easy handling and minimal effect on mowing smoothness
- Will not rust or corrode
- Resists wear and abrasion caused by sand
- Contoured design for clean appearance and smooth grass flow
Specifications
Capacity | |
Collector | |
Volume | 19 bu (670 L) or 23 cu ft (0.67 m3) |
Load | 500 lb (226.8 kg) |
Cart | |
Volume | 7.5 cu ft (0.21 m3) heaped; 6 cu ft (0.17 m3) struck |
Load | 500 lb (226.8 kg) |
Box dimensions | |
Width | 42 in. (107 cm) |
Length | 30 in. (76 cm) |
Depth | 8 in. (20 cm) |
Overall dimensions, including hitch | |
Width | 45.5 in. (116 cm) |
Length | 51 in. (129.5 cm) |
Depth | 44 in. (112 cm) |
Clearance | 10 in. (25 cm) |
Dump angle | 50 degrees |
Weight, shipping (with carton) | 176 lb (80 kg) |
Weight, net | |
Cart only | 119 lb (54 kg) |
Cover only | 26 lb (12 kg) |
Hitch only | 7.7 lb (3.47 kg) |
Power Flow™ dimensions | |
Fan diameter | 13 in. (334 mm) |
Fan width | 2.75 in. (70 mm), 3.75 in. (95 mm) for C Series Blowers |
Fan blades | 4, 5 for C Series Blowers |
Fan speed | 3400 (will vary with mower width) |
Tires | 4.10x3.50 4PR |
Bearings | |
Wheel | Iron/Oilite™ with grease fittings |
Caster | Roller ball with urethane seals and grease fittings |
Box material | 18-gauge, 0.05-in. (1.2-mm) steel |
Cover material | 14-oz (0.4-kg) black vinyl-coated nylon top, front, and upper side flaps 9.5-oz (0.27-kg) black polyester knitted cloth lower sides 0.397-sq yd (0.33-m2) knitted polyester netting |
Oilite is a trademark of Beemer Precision Incorporated.
Tractor compatibility and requirements
The MC519 Cart is compatible with the following tractors with 48A and 54A Accel Deep™ Decks, 38, 46, 48, 48C Convertible, 48 Edge™ Xtra Deck, 50-, 54-, 54C Convertible, 54 Edge Xtra Deck, 60, 60-in. (152-cm) 7-Iron™, 62C Convertible, 62 Edge Xtra Deck, or 54-in. (137-cm), or 60-in. (152-cm) High-Capacity (HC) mowers:
- 110 and 112 Tractors (SN 100,000 and above)
- 200, 210, 212, 214 and 216, GT242, GT262, GT275, GT225, GT235, GT235E, GT245, 240, 245, 260, 265, 285, 320, 325, 335, 345, 355D, GX255, GX325, GX335, GX345, and GX355 Tractors
- Select Series™ X320, X324, X340, X360, X380, X384, X390, and X394 Tractors
- X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
- 316, 318, 322, and 332 Tractors
- NOT compatible with 100, L100, LA100, D100, LT, LX, X300, X304, X310, X330, X350, X354, X370, or SST Series Lawn Tractors or G100 or G110 Garden Tractor
- NOT compatible with 316-332, 325-355D, GX325-GX355 Series Tractors with a 38-in. (97-cm) mower and blower assembly or 38-in. (97-cm) QT blower assembly
- 420 and 430
- 425, 445, and 455
- X465, X475, X485, X495, X575, X585, and X595 Heavy-Duty Garden Tractors (HDGT's)
- X700, X720, X724, X728, X729, X740, X744, X748, X749
- X710, X730, X734, X738, X739, X750, X754, X758
- NOT compatible with tractors (X400/X500 HDGT's or X700 Tractors) that have the 3-point hitch or 540 power take-off (PTO) shift arm attached
- 325/345 with 38-in. (97-cm) mower and Power Flow system requires M118053 arm
Requirements and/or recommendations:
1. Four 200 lb (91 kg) cast-iron rear wheel weights are recommended for ballast on GT242, GT262, GT275, GT225, GT235, GT245, 240, 245, 260, 265, 285, 320, 325, 335, 345, 355D, GX325, GX335, GX345, GX355, X500, X520, X534, and X540 Tractors when operating on slopes. Select Series X320, X324, X340, X360, X380, X384, X390, and X394 Tractors may need ballast to increase traction, stability, or steering, especially when operating on hillsides or if carrying heavier materials in the MC519 Cart.
2. 420 and 430 Tractors require one AM118915 60-in. (152-cm) Power Flow installation kit for mounting 60-in. (152-cm) Power Flow blower.
3. 316, 318, 322, 330, 332, 420, 430 require black hitch mounting bracket M115521.
Required on MC519 (S/N 045001 - ) to mount on the following Tractors:
- 316, 318, 322, 330, 332, 420, and 430
- 425 Two Wheel Steer (- A040774) without 3-Point Hitch
- 425 All Wheel Steer (- B040203) without 3-Point Hitch
- 445 (- C040542) without 3-Point Hitch
- 455 Two Wheel Steer (- C040507) without 3-Point Hitch
- 455 All Wheel Steer (- D040074) without 3-Point Hitch
This bracket was included in older MC519's but was eliminated when the 425, 445 and 455 Tractors hitch design was changed and the bracket was no longer required for hookup.
4. GT, 300 and GX 48C Mowers built before April 2002 may need 0.5-in. (13-mm) hole drilled in mower wheel bracket for installing BM20667 or BM21495 48C HP Blower. See Service Information Bulletin 02-11-45-7 for detailed instructions.
5. GT, 300 and GX 48C Mowers built after April 2002 may need slot added to mower wheel bracket for installing BM19439 and BM20523 QT Blower. See Service Information Bulletin 02-11-45-7 for detailed instructions.
6. X400/X500 HDGT's and X700 Ultimate Tractors require LP52039 Adaptor Kit for MC519 Cart, available from Order Zone.
7. X400/X500 HDGT's and X700 Ultimate Tractors with a 48C/48X Mower require BM20976 or BM22798 48 HP Adapter Kit to install BM20667 48C High-Performance Power Flow Blower Assembly to accommodate this mower's rotateable wheels:
- One BM20976 48C/48X High Performance Blower Assembly Adapter Kit is required to install the BM20667 48C HP Power Flow Blower on a 48C or 48X Mower Deck (SN -050588) with wheels that rotate.
- One BM22798 48C/48X High Performance Blower Assembly Adapter Kit is required to install the BM20667 48C HP Power Flow Blower on a 48X Mower Deck (SN 050589- ) with wheels that rotate.
8. The following older 425, 445, and 455 Tractors without a 3-point hitch also require black hitch mounting bracket M115521:
- 425 two-wheel steer (A040774 and below)
- 425 all-wheel steer (B040203 and below)
- 445 (C040507 and below)
- 455 two-wheel steer (C040507 and below)
- 455 all-wheel steer (D040074 and below)
9. BM20668 54C and BM20669 62C HP Power Flow Blowers require one AM133822 Mower Wheel Adjustment Pin for installation on 2004 and later 54C or 62C Mowers.
NOTE: In order to be used as a material collection system, an optional Power Flow blower and discharge chute must be ordered in addition to the LP49228 MC519 Material Collection System.
Ordering information
Customers, please contact a local John Deere dealer for availability and pricing information.
MC519 Material Collection System
Order number: LP49228
Dump from the seat capability for X300 Series Tractors
The MCS 7 attachment is designed to provide dump from the seat grass collection/expulsion for John Deere X300 Series Tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.
The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere MCS, installation is a breeze with simple hand tools.
Features:
- Lightweight aluminum construction
- Designed for full material expulsion
- Easy access self-latching spring tripped handle
- Ships almost fully assembled (5 minute handle assembly)
- Installs in seconds (after initial assembly)
Benefits:
- Easy - Convenient Access to dump handle directly from seat
- Clean - No material handling, no mess
- Efficient - Unload and go without leaving the seat
NOTE: Fits John Deere X300 Series 2-bag material collection systems. Not compatible with EZtrak Zero-Turn Mowers or the X300R Rear Discharge Tractor.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
MCS 7 attachment
Order number: LP47168
Mcs Power Flow Blowers
The high-performance (HP) Power Flow blower assembly for the 54-in. (137-cm) Accel Deep™ Mower is used with the hopper and chute to provide a very effective material collection system. A hopper and chute must be ordered separately to complete this material collection system.
Miscellaneous
The 12-V outlet kit can be installed on the tractor to provide power for various 12-V equipment.
The 40-in. (102-cm) Tractor Shovel expands the usefulness of any John Deere Select SeriesTM X300 or X500 Multi-Terrain Tractor by allowing it to pick up and move material. It utilizes a high-capacity electric actuator that provides lift, lower, dump, and down force functions. No front blade is required.
The tractor shovel takes the back-breaking labor out of jobs like moving mulch, spreading gravel, ground grading, and more. It installs using the tractor's existing frame holes. After initial installation, it can be removed or installed without tools.
The innovative opening design of the tractor shovel, combined with the lift height, assures complete emptying of material. The tractor shovel can also be used for scraping and grading by locking the shovel in the raised position.
Tractor recommendations and requirements:
- Rear tractor ballast recommended for improved traction
- Tire chains recommended for moving snow
- No tractor requirements
Key features:
- Can be used when upper part of shovel is locked in the raised position as a blade (without angling capability)
- Raised and lowered with electric actuator
- Provides down force to increase scraping effectiveness of blade
- Pick-up, transport, and empty a variety of loose material including soil, gravel, mulch, and snow
- Can be removed in 10 minutes or less
Compatibility:
- LP63767 40-in. (102-cm) Tractor Shovel is Compatible with:
- Select Series X300, X300R, X304, X310, X320, X324, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
- Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
Unique shovel design
The unique design of the 40-in. (102-cm) Tractor Shovel allows an operator who has a Select Series™ X300 Series (including X300R and X350R) or X500 Series Multi-Terrain Tractor to use the tractor shovel for lifting and moving material as well as for typical blade functions (without blade angling), such as blading, leveling, and scraping:
- Unique shovel design empties material completely.
- Shovel can be locked in the raised position for blading applications.
Operation
The tractor shovel is operated from the tractor seat with the use of a control rod and an electric switch.
An electric actuator provides power to raise, lower, and empty the shovel.
To raise or lower the tractor shovel, use the electric switch on the tractor shovel panel.
Depress the bottom of the switch to raise the shovel and depress the top of the switch to lower the shovel.
To open the shovel for emptying, raise it completely and then pull the control rod to the yellow area of the rod and press the upper end of the electric switch.
To close the shovel, press the lower end of the electric switch until the control rod releases to the black area of the rod.
Operation of the shovel for blading or leveling
To use the tractor shovel for blading, use the handle on the right side of the shovel to raise it and then use the locking lever to lock it in the raised position.
Specifications
Length of tractor shovel | 40 in. (101.6 cm) |
Depth of tractor shovel | 11 in. (27.9 cm) |
Capacity | 1.7 ft3 (48 L) |
Cutting blade material | 0.250-in. (6.4-mm) hardened steel |
Material thickness, shovel | 0.125 in. (3.2 mm) |
Load capacity | 150 lb (68 kg), evenly distributed |
Lift height | 4 in. to 6 in. (10.2 cm to 15.2 cm), depending on the tractor model |
Shipping weight | 110 lb (50 kg) |
Warranty | One-year limited warranty on parts |
Tractor compatibility and requirements
The 40-in. (102-cm) Tractor Shovel is compatible with the following tractors:
- Select Series X300, X300R, X304, X310, X320, X324, X330, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
- Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
Requirements and/or recommendations:
- Rear ballast is recommended for best performance.
- Tire chains are helpful and recommended when operating in snow.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
40-in. (102-cm) Tractor Shovel
Order number: LP63767
This fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:
- Automatically determines if the battery is 6- or 12-V and adjusts accordingly
- Helps maintain battery in good condition and ensures it is fully charged
- Powers on to charge battery and powers off when fully charged
- 'Onboard' feature allows mounting next to the battery on collector, street rods, and other occasional-use vehicles
- 1.5-amp trickle charges small batteries in 2 to 12 hours
- Maintains large battery charges
- Hookup protection guards battery and charger from damage
Includes a choice of battery connection methods:
- Standard color-coded clips to connect to any battery
- Cable with quick-disconnect plug and end loops that can be bolted to battery terminals and easily unplugged from charger when not in use
Transporting mulch, plants or debris is easier with the double bucket holder. Just attach the holder bracket to the rear of any Select Series™ X300, X500 Series Multi-Terrain, or X700 Ultimate™ Series Tractor. It is designed to carry up to 70 lb (32 kg) of material.
For use with standard 5-gal. (19-L) buckets - ordered separately.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Bucket holder (double)
Order number: LPJD301
Bucket (5-gal.)
Order number: LPJD400 (2 required)
Transporting mulch, plants, or debris is easier with the double bucket holder. Just attach the holder bracket to the rear of any Select Series™ X300, X500 Series Multi-Terrain, or X700 Series Tractor. It is designed to carry up to 70 lb (32 kg) of material for transporting mulch, plants, yard waste, or for adding ballast.
For use with the included John Deere 5-gal. (19-L) buckets.
NOTE: May not fit all tractor models with a weather enclosure or cab installed.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Bucket holder (double) with buckets
Order number: LPJD301W
This black 5-gal. (19-L) bucket perfectly complements the CargO Mount™ single and double bucket holders. It is made of sturdy black plastic.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Bucket - 5 gal. (19-L)
Order number: LPJD400
John Deere Fuel-Protect gasoline stabilizer is a unique formula developed to ensure optimum performance and protection year-round:
- Has corrosion preventers
- For lawn and garden equipment and other gasoline-powered vehicles
- Ensures quick starts in all two- and four-cycle engines
- Use in gasoline, gasoline-oil mixture, and ethanol blends
- Use to treat gas cans at each fill-up or use at every fill-up of vehicle
- Keeps fuel fresh for 12 months
- Contains a fuel injector and carburetor cleaner
- 1 oz (29.6 mL) treats 2 gal. (7.6 L)
Always use fuel stabilizer in gasoline.
Fuel sitting in gas tanks or gas containers for more than 30 days begins to degrade. Also, blended fuels and water in gasoline can form acids that corrode fuel-system components. Protect the investment - use John Deere fuel stabilizer with corrosion preventers and prevent hard starting, surging, lack of power, poor idle, flooding, and will not run or stay running conditions caused by poor-quality fuel. Ask a local John Deere dealer or visit JDParts.
Helpful tips:
- Add fuel stabilizer every time fuel is purchased.
- Deere gasoline-powered equipment is recommended to run on a minimum of 87 octane gasoline.
- John Deere Fuel-Protect for gasoline is safe to use in all types of gasoline, including gasoline/oil mixtures and blended fuels containing up to 10 percent ethanol.
- Use plastic fuel containers to store fuel; ask a local John Deere dealer.
- For best results, use a spill-proof gas can that automatically seals the gas can vent.
- Store fuel in a cool, dry, dark place in a sealed fuel can.
- Fill tank to the top every time the machine is put away.
- Make sure tank is drained if stored for the winter or treated if left for prolonged periods of time.
Please refer to the operator’s manual for additional recommendations and warranty information.
Fuel related issues are not considered a warrantable condition as there is no defect in the materials or workmanship of the machine.
For more information on fuel, visit John Deere Groundscare.
The John Deere MowerPlus smart connector wirelessly links a Select Series X300 or X500 Tractor to the MowerPlus app on a mobile device:
- No tools are needed for installation.
- Detailed set-up instructions are included.
- The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on and the mobile device app is running within range.
- The wireless connector and app work together to offer helpful information.
Tractor features available for viewing on the MowerPlus app include:
- Tractor engine hours automatically synchronized to the app
- In-app maintenance reminders and log, based on engine hours
- Fuel level - even when away from the tractor, the app remembers information, like the fuel level, from the last synchronization.
- When thinking ahead about Saturday morning mowing, the operator can make sure the tractor is fueled and ready to go.
- Help to determine the best time to mow
- Expert pre-mow optimization tips
- Maintenance walk-through instructions
The operator is able to visit their device’s app store to see new app features as they are added.
Since the smart connector communicates instrument cluster information, future app releases will be able to provide additional operating recommendations and notifications.
MowerPlus smart connector (BUC10537) for Select Series X300 and X500 Tractors
One end of the wiring harness plugs into the back of a Select Series X300 or X500 Tractor instrument cluster. The other ends plug into the smart connector and the tractor's wiring harness.
Compatibility and requirements
MowerPlus smart connector (BUC10537) is for model year 2016 and later Select Series X300 and X500 Tractors.
MowerPlus smart connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store:
- iOS® version 10 or higher is compatible with the smart connector.
- Android™ version 5.1 or higher is compatible with the smart connector.
NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.
Bluetooth is a trademark of Bluetooth SIG, Inc. Android is a trademark of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.
Seat net kit provides a convenient storage area for gloves, and other small items. It is available for open-back seats.
Mower Blades
M152726 is an approved alternative to M143520, standard side-discharge blade. M152726 improves cut-quality performance in certain grass conditions. It will increase the amount of lift or suction under the deck. It will be most beneficial for customers who are experiencing cut quality issues with the standard blade, especially in limp grass, typical in early spring and late fall. The blade will improve side-discharge performance, but a potential downside is increased blow-out in dry conditions.
M152726 is an approved alternative to M143520, standard side-discharge blade. M152726 improves cut-quality performance in certain grass conditions. It will increase the amount of lift or suction under the deck. It will be most beneficial for customers who are experiencing cut quality issues with the standard blade, especially in limp grass, typical in early spring and late fall. The blade will improve side-discharge performance, but a potential downside is increased blow-out in dry conditions.
M152726 is an approved alternative to M143520, standard side-discharge blade. M152726 improves cut-quality performance in certain grass conditions. It will increase the amount of lift or suction under the deck. It will be most beneficial for customers who are experiencing cut quality issues with the standard blade, especially in limp grass, typical in early spring and late fall. The blade will improve side-discharge performance, but a potential downside is increased blow-out in dry conditions.
Mower Decks
The BM26239 dry-condition kit, 54A is available for 54A Accel Deep Mower Decks used on model year 2016 and later X300 and X500 Select Series™ Tractors and Residential ZTrak™ Mowers.
The dry-condition kit will reduce the amount of blowout around the mower deck when side discharging, mulching, or bagging in dry grass and leaf conditions. For optimum mowing performance in lush-grass conditions, the dry-condition kit baffles may be removed.
Features and benefits
- Homeowners can now achieve results just like the professionals
- Brush is easy to adjust for varying mower cutting height
- Brush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turf
- The brush striping kit is a very economical and functional attachment
Compatible with the following:
- 48A or 54A - 48-in. (122-cm) or 54-in. (137-cm) Side-Discharge Mower for X350, X354, X370, X380, X384, X390, X394, X570, X580, X584, and X590 (model year 2016) Tractors
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
48A or 54A - 48-in. (122-cm) and 54-in. (137-cm) grass groomer
Order number: LP63761
Leveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.
Can be used for:
- Lawn tractors
- Lawn and garden tractors
- Riding mowers
- Front mowers
- Commercial walk-behind mowers
- Zero-turn-radius mowers
Mulch Kits
MulchControl advantages and benefits
The MulchControl attachment for the 54A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:
- A beautiful looking lawn
- Grass clippings not blown onto the operator, driveways, or flower beds
- Less fertilizer use
- Elimination of the effort needed to dispose of clippings
How MulchControl works
MulchControl is an innovative, simple design that is easy to use and maintain:
- The MulchControl attachment includes baffles to control the flow of material under the deck.
- The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulching and side-discharge modes.
- When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
- When the MulchControl baffle is closed, this material stays within the deck and gets chopped into mulch and deposited in the turf.
- The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
- The operator is required to get off of the machine in order to engage or disengage mulch mode.
- Changing from mulching to side discharging or vice versa takes only a few seconds.
MulchControl is well-suited to the following mowing situations:
- Usually mulch, but side discharge when grass gets too long
- Usually side-discharge, but would like to be able to close the chute to control clippings
- Always mulch a main lawn, but often side discharge secondary lawns
- Bag clippings, but want to go farther before emptying bags
- With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.
MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging or bagging when needed.
MulchControl limitations
While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
- When cutting strong southern grasses, such as Zoysia and Bermuda
- When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
- When optimum bagging and lawn clean-up is desired
MulchControl advantages and benefits
The 54-in. (137-cm) electric one-touch MulchControl attachment enhances versatility and productivity. A mower deck equipped with electric one-touch MulchControl not only does an excellent job of mowing and mulching, but it can also be quickly converted to side discharge or mulch mode with the touch of a switch:
- Easily converts while mowing from side discharge mode to mulch mode or vice versa
- In mulch mode, controls clippings dispersion in unwanted areas (driveways, landscape beds, near buildings, windows, parking lots, etc.)
- Reduces cleanup time needed to dispose of clippings
- Will reduce the amount of material entering a material collection system because, even in the side discharge mode, MulchControl will mulch about one third of the material because of the additional baffles under the mower deck
How electric one-touch MulchControl works
A tractor equipped with the electric one-touch MulchControl attachment delivers unprecedented levels of productivity and versatility. A convenient, dash-mounted switch provides operators the ability to change between side discharging and mulching. A heavy-duty baffle opens and closes easily with the touch of the dash-mounted switch.
A dependable electric actuator is used to close and open the mulching baffle. The mower deck can easily be converted from side discharge mode to mulch mode or vice versa in a few seconds by activating the switch.
MulchControl is an innovative, simple design that is easy to use and maintain:
- The MulchControl attachment includes baffles to control the flow of material under the deck.
- The MulchControl baffle, or divider, between the left and middle spindles is about halfway down. The height is designed to balance the mulch and side discharge modes.
- When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
- When the MulchControl baffle is closed, this material stays within the deck and gets chopped into mulch and deposited in the turf.
- The MulchControl electric switch is located on the tractor dash to open and close the discharge baffle.
- The operator is not required to get off of the machine in order to engage or disengage mulch mode.
MulchControl is well suited to the following mowing situations:
- For operators who usually mulch, but side discharge when grass gets too long
- For operators who usually side discharge, but would like to be able to close the chute to control clippings
- For operators who always mulch a main lawn, but often side discharge secondary lawns
- For operators who bag clippings, but want to go farther before emptying bags (48A and 54A Mower Decks only)
MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging or bagging when desired.
With electric one-touch MulchControl, operators can convert between modes without interrupting the mowing process, making it practical to change between modes as conditions require:
- When approaching clean areas like driveways or flowerbeds where clippings would be undesirable
- When a breeze might blow clippings back onto the operator
- For side discharge mowing only the areas of the property where grass is too tall or thick for mulching
- With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching
- With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.
- Models equipped with a 42A Mower Deck require a MulchControl baffle be removed to install the bagger chute; see 42A versatility explanation for more information.
Advantages of MulchControl include:
- Performance is improved.
- Mulching is beneficial because it returns the clippings to the ground as fertilizer, which promotes lawn growth.
- Clippings are much smaller, which allows them to fall into the grass and be removed from view.
- Unsightly grass clippings are not blown onto driveways or into flower beds.
- Fertilizer use is reduced and provides associated environmental benefits.
- Uptime is increased.
- Operators can convert quickly between modes, making it possible to change between mulching and side discharging as conditions require.
- Mulching heavy, thick material can significantly reduce mower productivity. The ability to switch from mulch to side discharge mode ensures productivity, especially in grass too tall to mulch effectively.
- Cost of operation is reduced.
- Controlling clipping dispersion reduces cleanup time.
MulchControl limitations
While in the side discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
- When cutting strong southern grasses, such as Zoysia and Bermuda
- When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
- When optimum bagging and lawn cleanup is desired
Compatibility
This electric one-touch MulchControl attachment is field installed and compatible with a 54A Mower installed on an X300 or X500 Select Series Tractor.
NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.
Protection
The brush guard adds a distinctive appearance to the tractor and protects the front of the tractor from damage.
By removing one spring clip and pin, the brush guard may be lowered to permit opening the hood.
The front bumper adds a distinctive appearance to the tractor and protects the front of the tractor from damage.
Features include:
- Bumper can be easily mounted to the front of the tractor.
- Bumper can remain on the tractor when the front blade or snow blower are used.
Cover provides heavy-duty protection for Select Series™ X300, X500, and X700 Tractors.
Features include:
- Wipe-clean reinforced bottom around mower deck
- Easy-on side handles makes snugging down cover a snap
- Dual reinforced air vents let air circulate and help prevent ballooning in wind
- Interior lining and integrated muffler heat shield
- Heavy-duty fabric will not shrink or stretch and is coated for maximum water resistance
- Easy-on split back for fast fitting and easy access after installation
- Handy storage pocket reverses into an attractive storage case
- Two-year warranty
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
Protective cover (large deluxe)
Order number: LP93647
Features include:
- Dual vents let air circulate and help prevent ballooning in wind
- Elastic shock cord in bottom hem for a quick, custom-like fit
- Coated fabric for maximum water protection
- One-year warranty
Cover provides all-season protection for 100 Series, S240 and Select Series™ X300 Series Tractors.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
Protective cover (standard)
Order number: LP93917
Deluxe thick-cushioned seat cover provides superior protection, all-day riding comfort, and lots of storage:
- Access to lumbar adjustment controls
- Large-capacity rear-zippered cargo pocket
- Two side mesh beverage pockets
- Elastic cord in bottom hem for a custom fit
- Medium size fits seats with backrests up to 15 in. (38.1 cm)
Ordering information
Contact your local John Deere dealer for availability and pricing information.
Seat cover, deluxe medium
Order number: LP92624
Seat cover protects new seats and renews old seats:
- Cushioned seat for extra comfort
- Four convenient pockets for keeping tools and gear within reach
- Elastic cord in bottom hem for a custom fit
- Medium size fits seats with backrests up to 15 in. (381 mm)
Ordering information
Contact your local John Deere dealer for availability and pricing information.
Seat cover, standard medium
Order number: LP92324
Spanish North American Kit
Spark Arrester
Spark arrester is available to meet the law in the State of California requiring use of a spark arresting muffler under certain conditions.
Applies in other states and Canada when needed to comply with local ordinances or customer requests.
NOTE: This law basically requires that purchasers of certain products be given written notice that it is illegal to use such machines on forest-covered, brush-covered, or grass-covered land (except watered lawns) without a spark arrester. For further information on this law, consult No. 4442.5 of the California Public Resources Code.
Sprayers
Features and benefits:
- 100-psi (689-kPa) SHURflo® diaphragm-type pump is designed for high-hour commercial applications; it can be run dry without damage.
- It is easy to assemble the custom mounting brackets.
- Brackets use the existing frame holes.
- Brass-tipped spray wand is included as standard equipment; it is constructed of noncorrosive polypropylene material with Viton® components for multi-use applications.
- Check valves in the boom tips prevent siphoning and dripping, which can cause lawn spotting.
- Control valve directs spray to either the boom or spray wand for added convenience
and versatility. - Electrical hookup is simple with a convenient on/off switch.
- Sprayer contains a rugged translucent-yellow tank with molded fill-level indicators (in gallons).
- It is only a 15-second no-tools mounting after assembly.
Specifications
Item number | LP22861 |
Tank capacity | 25 gal. (95 L) |
Boom | 60-in. (152.4-cm) boom, 90-in. (228.6-cm) spray |
Spray wand reach | 30 ft (9.1 m) |
Hose length | 19 ft (8 m) |
Shipping weight | 35 lb (16 kg) |
Warranty | 2-year consumer warranty |
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
25-gal. (95-L) Mounted Sprayer for X300 and X500 Tractors
Order number: LP22861
SHURflo is a trademark of SHURflo, LLC.
Viton is a trademark DuPont Performance Elastomers.
Sprayer comes complete with a boom that sprays 60 in. (152.4 cm) wide. It also has a 12-ft (3.7-m) hose with an adjustable handgun for spot spraying lawns, shrubs, etc.
Features include:
- This sprayer is an excellent choice for spraying small- to moderate-size lawns and shrubs.
- Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft (9.1-m) high.
- A 14-in. (35.6-cm) wand on the handgun is standard equipment to give added convenience when spraying trees.
NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).
This sprayer is especially suited for maintaining residential and small commercial properties:
- Sprayers provide an excellent way to apply liquid fertilizer.
- Herbicides and pesticides can be applied along with liquid fertilizer or separately.
Advantages of using liquid fertilizer over dry fertilizer:
- Fertilizer is more readily available to plants.
- The fertilizer need not be worked into the soil by watering or rain before it will work.
- Herbicides are more effective when applied with liquid fertilizer.
NOTE: Use these sprayers with liquid-base lawn care chemicals only. They are not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
15-gal. (57-L) Tow-Behind Sprayer
Order number: LP19478
Sprayer comes with a wider boom that sprays a 90 in. (228.6 cm) width. A 15-ft (4.6-m) hose and handgun are provided.
Features include:
- 100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
- Sprayer is designed to be a good choice for customers with larger lawns with trees to care for or for light commercial spraying.
- Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft (9.1 m) in height.
- The 14-in. (35.6-cm) wand on the handgun is included as standard equipment.
NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).
This sprayer is especially suited for maintaining residential and small commercial properties.
- Sprayers provide an excellent way to apply liquid fertilizer.
- Herbicides and pesticides can be applied along with liquid fertilizer or separately.
Advantages of using liquid fertilizer over dry fertilizer:
- Fertilizer is more readily available to plants.
- The fertilizer need not be worked into the soil by watering or rain before it will work.
- Herbicides are more effective when applied with liquid fertilizer.
NOTE: Use this sprayer with liquid-based lawn care chemicals only. It is not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
25-gal. (95-L) Tow-Behind Sprayer
Order number: LP19479
SHURflo is a trademark of SHURflo, LLC.
Spreaders
The mounted electric broadcast spreader for Select Series and Signature Series Tractors is ideal for medium- to large-size jobs and can be used to apply fertilizer, weed killer, sand, lime, and de-icer:
- Compatible with X300 and X500 Select Series and X700 Signature Series Tractors
- X300 Series Tractors must be equipped with 35-lb (16-kg) front wheel weights or front weight bracket and two 42-lb (19.1-kg) Quik-Tatch weights.
- The electric broadcast spreader is not compatible with the X300R Rear Discharge Tractor.
- When used on X700 Series Tractors, the spreader is not compatible with the weather enclosure, cabs, rear receiver hitch, or 3-point hitch.
Key features are as follows:
- 125-lb (57-kg) capacity injection molded poly hopper
- Durable welded, powder-coat frame
- Ice-melt capability
- Gear motor with 5-to-1 reducer
- Stainless-steel shutoff plates
- Directional control
- Hopper cover is standard equipment
- Available option: Barrier shield, 125-lb (57-kg) spreader
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Select Series Electric Spreader
Item number: LP35439
The barrier shield is used to direct product downward (36-in. [914-mm] width), converting the rotary spreader into a drop spreader. Perfect for ice melt and salt spreading, or for targeting specific areas.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
125-lb electric broadcast spreader barrier shield
Order number: LP23117
John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:
- Seed
- Fertilizer
- Insecticide
- Salt
All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.
Features include:
- Positive on/off system (no cables)
- 125-lb (57-kg) capacity corrosion-resistant polyurethane hopper
- 13-in. (33-cm) pneumatic tires for easy rolling
- Enclosed gearbox (metal gears)
- Ergonomic dual handle featuring Accu-way™
- Accu-way even spread pattern adjustment
- Includes screen and cover
Accu-way is a trademark of Spyker Spreaders, Inc.
Hopper screen and throat opening
Hopper screens keep out debris and serve as chunk graters.
A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.
Spinner
Spinners are made of high-impact plastic that will not crack or break.
Dial-A-Matic rate control
The Dial-A-Matic rate control lets the operator fine-tune the rate application:
- Dial position locks and unlocks automatically.
- More than 80 settings provide an accurate application of materials.
Specifications
125-lb (57-kg) Pull-Type Spreader | 175-lb (79-kg) Pull-Type Spreader | |
Recommended market | Homeowner | Homeowner |
Type | Tow-behind | Tow-behind |
Bundle number | LP25353 | |
Box capacity | 125 lb (57 kg), 2.5 cu ft (0.07 m3) | 175 lb (79 kg), 3.5 cu ft (0.1 m3) |
Hopper size, in. (cm) | 14.5x25.25x19.75 (36.8x64.1x50.2) | 18.5x27.5x21.5 (47x69.9x54.6) |
No-rust versatility | ||
Hopper | Polyethylene | Polyethylene |
Hopper screen | Aluminum | Aluminum |
Hopper bottom plate | Stainless steel | Stainless steel |
Throat opening, in. (cm) | 0.81x2.75 (2.1x7) | 0.81x2.75 (2.1x7) |
Connecting hardware | Stainless steel | Stainless steel |
Accurate application | ||
Rate control | 80-setting Dial-A-Matic knob | 80-setting Dial-A-Matic knob |
Rate gate | No-stick nylon | No-stick nylon |
Rate gate linkage | Stainless steel | Stainless steel |
Even dispersal | ||
Spinner, in. (cm) | 12 (366) | 12 (366) |
Spread pattern, ft (m) | 10 to 12 (3.1 to 3.7) wide | 10 to 12 (3.1 to 3.7) wide |
Spread pattern equalizer | Accu-way™ | Accu-way |
Spinner shaft | Zinc-plated steel | Zinc-plated steel |
Rotary agitator | Stainless steel | Stainless steel |
Miscellaneous | ||
Frame | Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steel | Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel |
Frame width, in. (cm) | 18 (45.7) | 18 (45.7) |
Drive gears | Heavy-duty die-cast metal | Heavy-duty die-cast metal |
Axle | 0.63-in. (15.9-cm) solid steel, zinc plated | 0.63-in. (15.9-cm) solid steel, zinc plated |
Wheels/tires | 13-in. x 5-in. (33-cm x 13-cm) pneumatic | 13-in. x 5-in. (33-cm x 13-cm) pneumatic |
Recommended travel speed | 3.5 mph (5.6 km/h) | 3.5 mph (5.6 km/h) |
Warranty | One-year limited | One-year limited |
Net weight, lb (kg) | 29 (13.2) | 34 (15.4) |
Accu-way is a trademark of Spyker Spreaders, Inc.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
125-lb Pull-Type Spin Spreader
Order number: LP25353
John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:
- Seed
- Fertilizer
- Insecticide
- Salt
All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.
Features include:
- Positive on/off system (no cables)
- 175-lb (79.4-kg) capacity corrosion-resistant polyurethane hopper
- 13-in. (33-cm) pneumatic tires for easy rolling
- Fully enclosed gear box with metal gears for long life
- Accu-way even spread pattern adjustment
- Includes screen and cover
Hopper screen and throat opening
Hopper screens keep out debris and serve as chunk graters.
A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.
Spinner
Spinners are made of high-impact plastic that will not crack or break.
Dial-A-Matic rate control
The Dial-A-Matic rate control lets the operator fine-tune the rate application:
- Dial position locks and unlocks automatically.
- More than 80 settings provide an accurate application of materials.
Specifications
125-lb (57-kg) Pull-Type Spreader | 175-lb (79-kg) Pull-Type Spreader | |
Recommended market | Homeowner | Homeowner |
Type | Tow-behind | Tow-behind |
Bundle number | LP25353 | |
Box capacity | 125 lb (57 kg), 2.5 cu ft (0.07 m3) | 175 lb (79 kg), 3.5 cu ft (0.1 m3) |
Hopper size, in. (cm) | 14.5x25.25x19.75 (36.8x64.1x50.2) | 18.5x27.5x21.5 (47x69.9x54.6) |
No-rust versatility | ||
Hopper | Polyethylene | Polyethylene |
Hopper screen | Aluminum | Aluminum |
Hopper bottom plate | Stainless steel | Stainless steel |
Throat opening, in. (cm) | 0.81x2.75 (2.1x7) | 0.81x2.75 (2.1x7) |
Connecting hardware | Stainless steel | Stainless steel |
Accurate application | ||
Rate control | 80-setting Dial-A-Matic knob | 80-setting Dial-A-Matic knob |
Rate gate | No-stick nylon | No-stick nylon |
Rate gate linkage | Stainless steel | Stainless steel |
Even dispersal | ||
Spinner, in. (cm) | 12 (366) | 12 (366) |
Spread pattern, ft (m) | 10 to 12 (3.1 to 3.7) wide | 10 to 12 (3.1 to 3.7) wide |
Spread pattern equalizer | Accu-way™ | Accu-way |
Spinner shaft | Zinc-plated steel | Zinc-plated steel |
Rotary agitator | Stainless steel | Stainless steel |
Miscellaneous | ||
Frame | Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steel | Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel |
Frame width, in. (cm) | 18 (45.7) | 18 (45.7) |
Drive gears | Heavy-duty die-cast metal | Heavy-duty die-cast metal |
Axle | 0.63-in. (15.9-cm) solid steel, zinc plated | 0.63-in. (15.9-cm) solid steel, zinc plated |
Wheels/tires | 13-in. x 5-in. (33-cm x 13-cm) pneumatic | 13-in. x 5-in. (33-cm x 13-cm) pneumatic |
Recommended travel speed | 3.5 mph (5.6 km/h) | 3.5 mph (5.6 km/h) |
Warranty | One-year limited | One-year limited |
Net weight, lb (kg) | 29 (13.2) | 34 (15.4) |
Accu-way is a trademark of Spyker Spreaders, Inc.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
175-lb Pull-Type Spin Spreader
Order number: LP25354
The 40-in. (102-cm) Aerator Spreader can do two jobs at once. It perforates the soil while the calibrated drop-spreader follows with seed, lime, or fertilizer. It can also be used to just aerate the lawn:
- 40-in. (102-cm) width, with up to 2 in. (5.1 cm) of penetration
- 132 steel-tine tips on 8-in. (20-cm) diameter tine stars
- Three-position, full-sized lift lever
- Direct spreader drive for consistent performance
- Adjustable flow control
- 100-lb (45-kg) spreader capacity
- 4.10/3.5-4 pneumatic tires for easy pulling
- 75-lb (34-kg) capacity weight tray
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
Width | 40 in. (101.6 cm) |
Aerator depth | Up to 2 in. (5.1 cm), two positions |
Spreader capacity | 100 lb (45 kg) |
Tines | |
Number of tips | 132 |
Diameter | 8 in. (20.3 cm) |
Material | Steel |
Lift adjuster | Manual |
Wheels | 4.10/3.5-4, pneumatic |
Drive | Direct |
Weight-tray capacity | 100 lb (45 kg) |
Vehicle compatibility and requirements
Requirements and/or recommendations: tow-behind equipment
- Rear wheel weights are recommended for additional traction.
- The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
- The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg). - For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
40-in. (102-cm) Tow-Behind Aerator Spreader
Order number: LPAS40JD
Broadcasts fertilizer, weed control, grass seed or ice melter products while towing behind a riding lawn tractor. 130-lb (59-kg) polyethylene hopper resists rust and is easier to clean. Spread pattern will go up to 12 ft (31 cm) depending on speed and material. New direct rod control with easy to reach handle opens and closes the material gate. Heat treated steel gears with plastic enclosure are protected from corrosive material. Large knobby tread tires roll easily over turf.
Two-year warranty.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
130-lb Pull-Type Spin Spreader
Order number: LP39087
This 175-lb (79-kg) pull-type broadcast spreader is designed for homeowner use:
- The polyethylene hopper will not dent or rust.
- All stainless-steel interior hardware, shaft, and agitator help to prevent corrosion.
- Large pneumatic turf tires ensure a positive drive and smooth operation.
- High-speed, 6:1 reduction glass-filled nylon gears provide the widest spread pattern at the slowest speeds.
- Fully enclosed gearbox eliminates downtime and maintenance.
- Autoflow feature stops the flow of materials - automatically - to prevent burns.
- Directional spread-pattern control feature provides positive shutoff along sidewalks and driveways.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
175-lb (79-kg) Broadcast Spreader
Order number: LPBS36JD
Sun Protection
The sturdy sun shade provides an effective way to keep the sun off of the operator for more comfortable warm-weather operation of the tractor:
- Frame is made of strong 1.25-in. (32-mm) diameter steel tube with 0.063-in. (1.6-mm) wall thickness.
The sun shade mounts to the heavy-duty CargO Mount™ system.
- Sun shade includes the 4-wheel-steer rear weight bracket to provide a sturdy
Quik-Tatch mounting system.- Holds up to two 42-lb (19-kg) Quik-Tatch weights on X300 Series Tractors
- Holds up to four 42-lb (19-kg) Quik-Tatch weights on X500 Multi-Terrain Tractors
- Cloth top measures 32-in. (81.3-cm) long by 34-in. (86.4-cm) wide.
- Rear panel is made of cloth mesh material to provide additional protection from the sun while permitting the operator to see through it.
- Two bolts with hand knobs on the mounting posts allow easy removal of the sun shade.
- Elastic strap with clip is included to hold the 7-bu (247-L) hopper top open when the hopper is installed.
- Overall height to the top of the sun shade is 72 in. (182.9 cm).
The sun shade is compatible with the following:
- Select Series™ X300, X304, X320, X324, X340, X350, X354, X360, X370, X380, X384, X390, and X394 Tractors
- Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
The 7-bu (247-L) 2-bag hopper or 14-bu (493-L) 3-bag hopper can be installed and used with the sun shade installed. The sun shade installation instructions explain how to install the hoppers with the sun shade.
Ordering Information
Please contact your local John Deere dealer for availability and pricing information.
X300/X500 Sun Shade
Order number: BM23054
Thatchers
The thatcher, used on a regular basis, reduces excessive thatch buildup that can be damaging to a lawn's health.
Since it provides more gentle, less aggressive action than a power rake, it can be used as a preventive maintenance tool each time the lawn is mowed.
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
38-in. (97-cm) Front Thatcher
Order number: LP48004
An 8-in. (20-cm) extension is available to provide widths of 46 in. (117 cm) and 54 in. (137 cm) (Add an extension to one end of front thatcher to make it 46-in. [117-cm] wide; add an extension to both ends for a 56-in. [142-cm] width.)
A thatcher mounting frame is required to install the 38-in. (97-cm) front-mounted thatcher on a vehicle.
The 40-in. (102-cm) Thatcherator can be used as a dethatcher or an aerator. It can also be used to prepare an area for seed:
- 40-in. (102-cm) width to cover ground fast
- 20 spring-loaded tines for maximum performance
- Three-position adjustment
- Weight tray to allow increased scratching power
An 8-in. (20-cm) extension is available to provide widths of 48 in. (122 cm) and 56 in. (142 cm) (Add an extension to one end of Thatcherator to make it 48-in. (122-cm) wide and an extension to both ends for a 56-in. (142-cm) width.)
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
Width | 40 in. (101.6 cm) |
Tines | |
Number | 20, spring-loaded tips |
Diameter | 0.19 in. (0.5 cm) |
Material | Steel |
Weight tray capacity | 100 lb (45 kg) |
Lift adjuster | Three positions |
Wheel | |
Size | 8 in. (20.3 cm) |
Tread | Rib |
Material | Steel |
Optional extension | 8 in. (20.3 cm) |
Requirements and/or recommendations: tow-behind equipment
- Rear wheel weights are recommended for additional traction.
- The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
- The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak Mower not to exceed 250 lb (113 kg).
- For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
40-in. (102-cm) Tow-Behind Thatcherator
Order number: LPTA40JD
Tire Chains
Protect your driving surface. TerraGrip Traction Belts offer enhanced traction on snow, mud, dirt, wet asphalt, and wet concrete surfaces. They will not scratch or chip concrete, asphalt, or aggregate drives or walkways. The proven reliability of the traditional steel chain attachment system is used and combined with the performance and durability of reinforced rubber slats. The rubber slats wrap around the tire so only rubber touches the driving surface. The result is aggressive traction without the risk of surface damage, that can happen with traditional chains.
Features:
- Rubber slats surround the tire and will not damage driveways or sidewalks.
- No steel touches the driving surface.
- No-tools installation utilizes a traditional steel chain attachment system.
- Traction is improved on all surfaces, especially loose material (snow, dirt, mud, sand, etc.).
- TerraGrip Traction Belts are approved for John Deere X300, X500 M-T, and X700 Series Tractors.
Additional information for 4-wheel-steer tractor models:
- X700 Series – requires wheel spacer sold separately
- X500 Series – requires wheel stop adjustment
- X300 Series – no additional requirements
Chains are recommended for extra traction when using attachments such as a snow blower or front blade.
One pair of chains is included in each bundle.
TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, D125, E100, E110, and E120 Tractors.
TY16200 tire chains - 20x10-8 (for some models), 20x10-10
NOTE: For LA135 SE, LA145, LA155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.
TY25229 tire chains - 20x10-8 (for some models), 22x9.5-12
NOTE: For LA165, LA175, D130, D140, D150, D155, D160, D170, E130, E140, E150, E160, E170, and E180 Tractors.
TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.
TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.
TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.
TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016- (SN 040,000-) X734 and X754.
TY25326 tire chains - 26x10.5-12
NOTE: For model year -2015 (SN -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.
TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.
Tow Behind
The 42-in. (107-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.
Features include:
- 42-in. (107-cm) clearing width
- 17-bu (599-L) capacity to make fast work of picking up material
- Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
- Hitch has seven positions to match up correctly with a variety of vehicles
- Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
- A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
Brush height | Sweeping conditions |
Ground level to 1 in. (25 mm) above | Smooth surfaces - driveways, parking lots, and sidewalks |
1 in. (25 mm) to 2 in. (50 mm) | Mowed lawns under normal conditions, or light leaves |
2 in. (50 mm) to 3 in. (75 mm) | High grass, heavy leaves, or heavy grass clippings |
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
42-in. (107-cm) Tow-Behind Lawn Sweeper
Order number: LPSTS42JD
The 44-in. (112-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.
Features include:
- 44-in. (112-cm) clearing width
- 17-bu (599-L) capacity to make fast work of picking up material
- Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
- Hitch has seven positions to match up correctly with a variety of vehicles
- Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
- A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
Brush height | Sweeping conditions |
Ground level to 1 in. (25 mm) above | Smooth surfaces - driveways, parking lots, and sidewalks |
1 in. (25 mm) to 2 in. (50 mm) | Mowed lawns under normal conditions, or light leaves |
2 in. (50 mm) to 3 in. (75 mm) | High grass, heavy leaves, or heavy grass clippings |
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
44-in. (112-cm) Tow-Behind Lawn Sweeper
Order number: LP49038
This John Deere dethatcher kit has two rows of individually flexing tines that gently but effectively remove grass clippings, leaves, and other lawn debris from your lawn. The kit easily attaches to the front of John Deere's 42-in. (107-cm) Lawn Sweeper (LPSTS42JD) to add thatch pickup to the sweeper's cleaning abilities. The dethatcher does not need to be removed to resume regular sweeping use.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
Dethatcher kit for sweeper
Order number: LP42108
The Multi Tool includes one platform and two separate attachments, saving space and money.
- Includes 40-in. (101.6-cm) weight tray - capable of holding up to 100 lb (45.4 kg) of weight
- Includes pre-assembled core aerator - reduces soil compaction allowing air, water, and fertilizer to the grass roots
- Includes dethatcher - removes unwanted debris from the top of the soil to allow nutrients to reach the grass roots
- Elongated handle - makes it easier to raise into transport or lower for use
- Spring assisted lever - makes changing the attachments quick and easy
John Deere has combined the best lawn tools into one package.
Two-year warranty.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Multi Tool
Order number: LP39089
The Lawn Roller packs down sod, seed, and mole ridges. Its tough polyethylene drum does not dent or rust. The drum's rounded ends do not gouge the lawn or make ruts:
- 36-in. (91-cm) wide polyethylene drum
- 390-lb (177-kg) weight for excellent leveling
- Rounded end caps to reduce gouging
- 42-U.S. gal. (159-L) capacity
- Long-lasting Nylatron® bearings
Nylatron is a trademark of QUADRANT AG or its affiliates or licensors.
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
Width | 36 in. (91 cm) |
Roller | |
Size | 36 in. x 18 in. (91 cm x 46 cm) |
Capacity | 42 U.S. gal. (159 L) |
Weight (filled) | 390 lb (176.4 kg) |
Drum/end-cap material | High-density polyethylene (HDPE) |
Bearings | Nylatron |
Requirements and/or recommendations: tow-behind equipment
- Rear wheel weights are recommended for additional traction.
- The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
- The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
- For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
36-in. (91-cm) Tow-Behind Lawn Roller
Order number: LPPRT36JD
The 40-in. (102-cm) Plug Aerator removes plugs of soil up to 3-in. (7.6-cm) deep to allow penetration of air, water, and nutrients. It also helps relieve soil compaction:
- 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
- Three-position lift handle for 2-in. (5-cm) or 3-in. (7.6-cm) plug lengths
- 28 carbonized, 16-gauge, 0.06-in. (1.5-mm) steel, individually serviceable plugging tines
- 1-in. (2.5-cm) diameter high-carbon steel-tine shaft
- 4.10/3.50-4 pneumatic tires for easy pulling
- 175-lb (79-kg) capacity weight tray
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
Width | 40 in. (101.6 cm) |
Aerator depth | Up to 3 in. (7.6 cm) |
Tines | |
Number of tips | 28 |
Spacing | 6 in. (15.2 cm) apart |
Material | Carbonized, 16-gauge, 0.6-in. (1.5-mm) steel |
Lift adjuster | Manual, three position |
Wheels | 4.10/3.5-4, pneumatic |
Weight-tray capacity | 175 lb (79.4 kg) |
Vehicle compatibility and requirements
Requirements and/or recommendations: tow-behind equipment
- Rear wheel weights are recommended for additional traction.
- The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mowers, or Residential ZTrak™ Mowers.
- The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg). - For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
40-in. (102-cm) Tow-Behind Plug Aerator
Order number: LPPA40JD
The 40-in. (102-cm) Spiker Aerator penetrates soil, allowing air, water, and nutrients to enter the lawn. It also relieves soil compaction:
- 40-in. (102-cm) width with up to 2 in. (5 cm) of penetration
- 10-in. (25-cm) diameter steel-tine stars
- 132 steel-tine tips on 11 spike wheels
- 3.5-in. (9-cm) spike-wheel spacing
- Full-sized lift lever
- 4.10/3.5-4 pneumatic tires for easy pulling
- 100-lb (45-kg) capacity weight tray 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
Width | 40 in. (101.6 cm) |
Aerator depth | Up to 2 in. (5.1 cm) |
Tines | |
Number of tips | 132 |
Diameter | 10 in. (25.4 cm) |
Spacing | 3.5 in. (8.9 cm) apart |
Material | Steel |
Lift adjuster | Manual |
Wheels | 4.10/3.5-4, pneumatic |
Weight tray capacity | 100 lb (45 kg) |
Requirements and/or recommendations: tow-behind equipment
- Rear wheel weights are recommended for additional traction.
- The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
- The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
- For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
40-in. (102-cm) Tow-Behind Spiker Aerator
Order number: LPSAT40JD
Weather Enclosures
The roomy steel-frame cab shields the operator against snow, rain, sun, and wind.
Key features include:
- Easy entry with hinged-door access
- Double-zippered access hole for control maneuverability
- Super-clear vinyl windows that are cold-crack tested to -4°F (-20°C)
- Zippered windows that allow for additional airflow
- Assembles and installs with standard hand tools in one hour
- Overall height from ground to top of cab of 78 in. (198 cm)
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Weather enclosure
- Discontinued - LP36740 Weather Enclosure - Select Series™ X300, X304, X310, X320, X324, X340, and X360 Tractors
- LP55438 Weather Enclosure - Select Series™ X300, X304, X310, X320, X324, X340, X350, X360, X354, X370, X380, X384, X390, and X394 Tractors
- Discontinued - LP36741 Weather Enclosure - Select Series X500, X520, X530, X534, X540, and X590 (model year 2015) Multi-Terrain Tractors
- LP55439 Weather Enclosure - Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
Weights
One 30-lb (13.6-kg) cast-iron weight may be installed on each front wheel for additional stability when operating on hillsides or with heavy rear equipment.
Requirements:
- Mounting may require drilling two holes in the wheel rim.
- BM17978 mounting hardware kit is required for each weight.
NOTE: Front wheel weights are not available for special-edition tractors because the styled front wheel design does not have appropriate holes for mounting the wheel weights and no adapter is available.
The 42-lb (19-kg) Quik-Tatch can be used to counterbalance a heavy front or rear attachment and/or provide greater stability, especially when operating on hills.
This weight is constructed of cast iron and weighs approximately 42 lb (19 kg).
Some vehicles have built-in front and/or rear weight brackets to hang the weights on; others require a weight bracket that must be ordered separately.
X400/X500 Heavy-Duty Garden Tractors and X700 Series Tractors require the following parts when weights are installed on the front of the tractor:
- One M147986 weight retaining rod (Parts)
- Two M40461 spring clip (Parts)
The optional front weight bracket/bumper is available to replace the standard front bumper on the following tractors:
- Select Series™ X300, X300R, X304, X305R, X310, X320, X324, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
- Model year 2007 and later (SN 020001-) Select Series model X500 Tractor
- All X530 Select Series Tractors
- Model year 2011 and later (SN 060001-) Select Series model X534 Tractor
- X570 Select Series Tractor
NOTE: Weights are ordered separately.
Holds up to four 42-lb (19.1-kg) Quik-Tatch weights:
- Provides an alternative to front-wheel weights for ballasting rear-mounted equipment
- Makes the 42-in. (106.7-cm) Hydraulic Tiller compatible with the X530 Tractor
- Functions as a bumper when weights are not installed
Can be used in combination with all John Deere equipment, except the following:
- Styled front bumper (BM23056)
- 40-in. (101.6-cm) Tractor Shovel
Hardware is required for installing each front-wheel weight.
Requirements:
- Mounting may require drilling two holes in the wheel rim.
- BM17978 mounting hardware kit is required for each weight.
NOTE: Front-wheel weights are not available for special edition tractors because the styled front-wheel design does not have appropriate holes for mounting the wheel weights and no adapter is available.