DM50 DISC MOWER

Disc Mowers

  • Rope System transport latch
  • Quick-remove shear hub assembly
  • DM5050 & 5060 iMatch and Quick Coupler compatible
  • DM5070 Cat. 2 Quick Coupler compatible





Features



DM50 Series float spring tension adjustmentDM50 Series float spring tension adjustment
#

Set the float spring to get maximum performance during operation. Adjust properly so the down pressure does not damage crop stubble as the skid shoes pass through the field.

Park stand in park positionPark stand in park position
Park stand in operating positionPark stand in operating position

The DM50 Series Disc Mower park stand and parking arm work together to transfer the mower’s weight to the cutterbar while in the parked position. This makes the attachment process easier, saving time and frustration.

Park arm in park positionPark arm in park position
Park arm in operating positionPark arm in operating position
Oval-shaped disc removedOval-shaped disc removed
#

Cutterbar serviceability is easier on the DM50 Series Disc Mowers. Remove the oval-shaped disc(s) with only four bolts per disc. The shear hub assembly can be serviced by removing the remaining four bolts. This will save time and oil replacement costs by not splitting the entire cutterbar to replace the sheared hubs as required in previous models. 

Shear hub assembly on DM50 SeriesShear hub assembly on DM50 Series
Shear hub assembly on DM50 SeriesShear hub assembly on DM50 Series

Take the shear hub assembly off the cutterbar by removing only eight bolts.

DM50 in transport positionDM50 in transport position
DM50 in operating positionDM50 in operating position

The transport lock system is a simple mechanical system that saves time and ensures safety. Use the rope system to raise the transport lock, engage selective control valve (SCV) 1 to bring the cutterbar into the transport position, and release the rope system to lock for transport.  

Outer swath wheelOuter swath wheel
#

Add the outer swath wheel to the DM50 Series Disc Mower to achieve separation between cut and uncut crop. By keeping the cut crop out of the uncut crop, cutting is not happening twice, which would reduce overall productivity. The swath wheel is fully adjustable up and down the length of the cutterbar, and it bolts directly to the top frame with U-bolts.

Specifications


Compare the specifications of up to 4 models

Dimensions dm50-disc-mower
Current Model
Cutting width2.36 m
7.7 ft
Swath width1.75 m
5.7 ft
Operation of cutting angle+/- 25 degree (angle)
Weight
Per machine442 kg
975 lb
Shipping (1 unit and crate)998 kg
2,200 lb
Tractor compatibility
Hitch
CategoryCategory 1, Category 2 - iMatch and Quick-Coupler compatible
Type3-point
Cutterbar
Cutting discs
QuantitySix
rpm3,000 rpm
Knives
V-belts with tensioner
Set-up time (per unit)
Warranty