Need 24/7 Parts? Call 855-573-7278

FIND YOUR JAMES RIVER

S180 LAWN TRACTOR

Lawn Tractor

24 hp (17.9 kW)* V-Twin Extended Life Series (ELS) Engine
54-in. Edge™ Mower Deck
Electric PTO, Heavy Duty Hydrostatic Transmission w/side-by-side pedals
Easy Change™ 30-Second Oil Change System
Adjustable lumbar seat and standard front bumper
Easy to read fuel gauge
2 year/120 hour bumper-to-bumper warranty

View Product Brochure

Features

Engine is powerful and smooth-running V-twin design

24-hp (17.9-kW) ELS engine

A 24-hp (17.9-kW) V-twin extended-life series (ELS) engine provides plenty of power and torque to handle tough mowing, mulching, and bagging:

Includes ELS engine features for enhanced performance and longer life
V-twin cylinder design for greater torque, lower vibration, and improved sound quality
Electronic ignition for fast starts
Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
Cast-iron cylinder liners for longer engine life
Overhead valves for excellent power and fuel economy
Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
- More effective when operating the tractor on an incline

Fuel tank

Fuel filler opening

The capacity is 2.4 U.S. gal. (9.1 L).
The fuel filler opening is conveniently located under the seat.
- Filling the tank without spilling is easy.
- A tethered fuel tank cap is more convenient.
- The sealed fuel cap helps keep vapors inside the tank.

John Deere Easy Change™ 30-second oil change system

John Deere Easy Change 30-second oil change system

The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as twisting on a new oil-filled filter. Oil does not need to be drained from the engine.

The John Deere Easy Change filter is an additional engine oil reservoir. Changing the filter removes the captured contaminants and replaces about 0.8 qt (0.76 L) of engine oil.

The functionality does not stop with ease of use. The Easy Change oil system has several meaningful benefits over the traditional oil filter system of the 100 Series:

A synthetic filter material is used for more predictable filtering and longer life.
Filtering capacity is greater than with a standard oil filter.
- More filter surface area
- More oil flow capacity
The system has 40 percent more oil volume.
The oil and engine run cooler.
The oil filter valve closes whenever the engine stops, so filtered particles are captured and cannot drain back into the engine.
The risk of spilling during oil service is greatly reduced.
Waste oil (and new oil production) is reduced by over 1,000,000 lb (453,592.4 kg) per tractor production year.
This system is not a compromise to just make oil changes easier—these engines pass the same John Deere expectations and rigorous testing as always.

Partly due to these improvements, it is not necessary to remove and dispose of all the oil in the engine during service.

Everyone who uses the John Deere Easy Change system saves time and avoids the mess of a traditional oil change. In the past, many 100 Series Lawn Tractor owners rarely or never got around to changing their engine oil. With the 30-second oil change, even people who previously would not consider changing the oil themselves can easily do it. The Easy Change system is a no-mess, no-fuss solution the competition cannot match.

Installation instructions are in the Operator’s Manual and in the John Deere Easy Change service part box.

Please recycle. Many local government recycling programs, authorized retailers, auto-service centers, and auto-parts stores will puncture and recycle used oil filters and oil.

Full-featured engine is more reliable and lasts longer

24-hp (17.9-kW) engine

This full-featured engine is engineered to deliver world-class endurance and power. A step above the competition, it is designed to be more dependable and longer lasting, saving time and money over the long run.

Built to exceed demanding needs by incorporating premium features and innovative designs:

Overhead valve (OHV) design for cooler operation and longer valve life
Contains an advanced debris management system that directs cooling air through the rotating screen to the air cleaner compartment, where large debris is pre-filtered through ejector slots
- Keeps unfiltered air out of the engine through a large, dual-sealed, premium oval-shaped cartridge-style filter
- Ensures maximum protection for extended engine life with the premium air cleaner, a pleated paper filter with a foam precleaner
- Captures fine particles for maximum protection and extended maintenance
Provides maximum protection with full-pressure lubrication system
- Pumps oil by a mechanical gerotor-style pump to all critical engine components
A premium bearing package for improved durability; includes a super-finished crank pin bearing with a 50 percent smoother surface to increase load capacity by 35 percent
- Uses a premium DU Teflon®-coated bearing
- Helps resist wear and increases durability through self-lubricating bronze bearing
Wear-resistant, chrome-plated valve stems for long-life valves
- 44 percent smoother for longer life
Cast-iron cylinder liners for longer life
Dependable float-feed type carburetor with integral fuel pump
High-capacity fuel filter for dependable operation
John Deere Easy Change™ 30-second oil change system makes changing the engine oil easy, quick, and clean
Maintenance-free electronic ignition for quick, dependable starts
Platinum spark plugs for extended life

Teflon is a trademark of The Chemours Company.

Frame made of full-length welded steel for reliability

Solid one-piece frame

The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:

Full-length, robotically welded frame design has high-strength steel rails for added strength and long life.
One-piece, steel fender deck is bolted to the frame.

Cast-iron front axle will not bend

Front axle and wheel spindle

The front axle is constructed of solid cast iron that will not bend:

Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.
Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.

Front bumper protects the tractor

Front bumper

The front bumper is included on the S130, S140, S160, S170, and S180. It is available as an optional attachment for the S100, S110, and S120.

Additional front-end protection
Attractive, bold style

CargO Mount™ system makes installation of rear bagger and other attachments easy

Rear CargO Mount points

Front CargO Mount points at the top of the dashboard

Rear bagger is mounted with CargO Mount points

The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.

Snow removal is a strength of lawn tractors

Snow blower, weather enclosure, weights, and chains on a 100 Series Tractor

Front blade, weather enclosure, and chains on a 100 Series Tractor

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

44-in. (112-cm) Snow Blower
46-in. (117-cm) Front Blade
Tire chains or TerraGrip traction belts
Weather enclosure
Weights

Hydrostatic transmission gives an infinite choice of ground speeds

Two-pedal speed/direction controls

Forward speed control pedal in use

A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel:

Automotive-type accelerator controls ensure easy operation.
Operator can change direction without lifting foot off the platform.
Large pedal surface gives superior operator comfort.

Hydrostatic transmission

Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:

Tuff Torq TLT200 – S100, S110, S120, S130, S140, and S160
Tuff Torq K46 - S170 and S180

Operator station designed for comfortable operation

Operator station is designed for comfort (S160 shown)

Comfortable operator station, left side (S170 shown)

The operator station is designed for operator comfort and easy operation:

Controls are positioned where they are easy to reach and use to control the tractor.
The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
The seat is positioned to provide the most comfortable operator position.

Steering wheel and dash

Wide footrest with debris channels

Controls are easy to see and use:

A deluxe, 14-in. (35.6-cm) steering wheel provides greater operator comfort and control.
Ignition switch is on the dash for starting ease.

Wide footrest areas with non-slip, anti-vibration rubber floor mats are provided for operator comfort:

The wide footrest makes it easy to step over the mower deck while entering or exiting the seat.
Debris removing channels help keep the footrest area clean and dry.

Comfortable lumbar seat

Lumbar seat adjustment knob

Easy-to-adjust seat

Operator comfort is enhanced with a 15-in. (38-cm) high-back, two-piece seat with an open back:

Especially helpful when operating the tractor for extended periods of time
Easily adjusted forward or rearward while in the seat
Seat travel of 5.5 in. (14 cm) and 10 different positions to adjust for operator height

Seat springs give a smoother ride

Seat tilted forward

Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor.

The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.

Beverage holder

Storage compartment with cover

A beverage holder and storage compartment, located on the right fender, are conveniently located and easy to use.

Handgrip and reflector on fender flare

Fender flares cover the tires more completely and add style to the tractor. Handgrips give extra comfort for the operator, especially when operating on hillsides. Reflectors make the tractor more visible.

Instruments and controls are easy to find and convenient to use

S130 Tractor

Steering wheel and controls on S130

Instruments and controls

The contoured dash has clean, attractive styling:

Controls are color-coded and labeled for easy identification.
Controls are logically placed and easy to reach.
The hour meter makes it easy to tell when oil changes and other maintenance should be performed.
Functional design of the controls provides good appearance and a comfortable feel.

Easy-read fuel gauge shows fuel level on the dashboard

Easy-read fuel gauge

Convenient fuel filler opening

The easy-read fuel gauge shows how much fuel is in the tank and can be seen on the dashboard:

Easy to check fuel level
Convenient location
Visible in cloudy or dusk conditions (is not backlit)
Does not slosh from bumps
The MowerPlus™ smartphone app can read and remember the fuel level (optional MowerPlus deluxe smart connector required)
The hour meter is also visible on the fuel gauge display

Side-by-side transmission control pedals

Two-pedal speed/direction controls

Side-by-side foot pedals

Side-by-side foot pedals control the speed and direction of travel:

Automotive-type accelerator controls ensure easy operation.
Operator can change direction without lifting foot off the platform.
Large pedal surface gives superior operator comfort.

Cruise control (S120, S130, S160, S170, and S180)

Cruise control lever

Cruise control is available on the S120, S130, S160, S170, and the S180:

To engage, lift the cruise lever and hold until the foot is removed from the forward pedal.
The cruise control can be released by pushing on the brake pedal or the forward pedal.

Mower deck height adjustment

Mower deck height adjustment lever

A spring-assisted, ergonomically designed lift lever simplifies adjusting the mower cut height:

Increments of 1/4 in. (0.64 cm) allow fine-tuning the cut height.
Cut height is adjustable from 1 to 4 in. (2.5 to 10.2 cm).
The lift handle is shaped for easy use and is out of the way of entering or exiting operators.

Parking brake control

Brake/parking brake pedal

Parking brake lever

The parking brake control is conveniently located on the tractor pedestal for easy access. It holds the brake pedal securely in the locked position.

Electric power take-off (PTO) clutch is easy and convenient

Electric PTO engagement switch

The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.

Reverse implement option (RIO)

RIO switch

Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

Carefully check the area around the machine.
Disengage the mower before backing up.

NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

Stop forward travel.
Look behind the machine to be sure there are no bystanders.
Push and hold in the RIO switch while depressing the reverse pedal slightly.

NOTE: If the engine and mower or other attachment stops while repositioning the machine, return the attachment engagement lever/switch to the off position. Start the engine and engage mower or other attachment. Begin again with step 2.

Release the RIO switch and reposition the machine as the machine begins to move rearward.
Resume forward travel. The mower or other attachment should continue operating.
Repeat procedure to position the machine again.

Serviceability is convenient with easy-open hood

One-piece hood is easy to open

Service interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

Important service points are located within easy reach.
A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.

John Deere Easy Change™ 30-second oil change system

Seat tilted up for easy access to fuel-fill opening

The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as removing the old oil-filled filter and twisting on a new oil-filled filter.

The seat tilts up and out of the way to make adding fuel easy.

Hood will not rust or dent and includes quality headlights

One-piece hood opens for service access

Quality headlights for good visibility

Molded-in color material reduces sound and will not rust or dent.
Same quality hood material as on larger John Deere tractors provides good resilience and UV resistance for an extended time.
Openings on the side let in plenty of cooling air while keeping the sound level low.
Two headlights provide good lighting for nighttime operation.

The MowerPlus™ app helps maintain the tractor and lawn

MowerPlus app screen

MowerPlus app maintenance screen

Keep a John Deere lawn tractor running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.

Look for the MowerPlus app on the iOS® or Android™ system app stores.

The app supports residential lawn equipment such as 100 Series, 200 Series, X300, X500, X700, Z200 through Z600, and many similarly sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.

NOTE: Some product image variation may exist.

MowerPlus connectors also available (sold separately)

MowerPlus hour meter connector

MowerPlus deluxe smart connector, with a phone

The John Deere MowerPlus connectors wirelessly link a lawn tractor to the MowerPlus app on a mobile device.

	Deluxe smart connector	Hour meter connector
Compatible with lawn tractors	S120, S130, S160, S170, and S180 Model year 2021 and later S240 (SN 880,001- )	S100, S110, S140, S220
Communicates engine usage to track maintenance intervals	X	X
Communicates fuel level and battery health	X
Compatible with MowerPlus app for iOS® operating system	X	X
Compatible with MowerPlus app for Android™ operating system	X

iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC.

The Edge™ cutting system gives superior performance

The Edge cutting system

The Edge cutting system has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give superior mowing performance, convenience, and reliability:

The deep-deck design lifts grass for a clean, even cut.
The smooth underside has no nooks and crannies, preventing grass buildup and evenly dispersing grass clippings.
The rolled outer edge of the deck provides extra strength and protection.
Dual-stage E-coat and powder paint coatings provide extra protection from rust.
Flexible discharge chute minimizes property and mower deck damage.

The 54-in. (137-cm) Edge Mower Deck is a three-spindle design with heavy-duty characteristics:

The 11-gauge, 0.120-in. (3-mm) steel deck will provide years of dependable mowing.
Included blades work well for side-discharge or bagging.
The blade-to-spindle design provides a unique mounting system for the mower blade that gives extra safety and convenience.
Five mower deck wheels are standard equipment for a smooth mowing job in rolling terrain.
A mulching attachment is available and comes with blades that enhance mulching performance.

Mower wash port

Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy:

A hose connector included with mower deck.

Optional Power Flow™ bagger

6.5-bu (229-L) hopper, chute, and Power Flow blower on an S180

A 6.5-bu (229-L) Power Flow bagger is sold separately. The bagger kit provides efficient bagging performance and has easy-to-empty bags.

Two-year or 120-hour bumper-to-bumper warranty is included

An exclusive 2-year or 120-hour single-source, bumper-to-bumper warranty* is included for all John Deere 100 Series Tractors.

The warranty is hassle free, with John Deere handling the service and paperwork.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

Specifications

Compare the specifications of up to 4 models

Key Specs	s180-lawn-tractor Current Model
Engine power	24 hp 17.9 kW
Oil change	John Deere Easy Change™ 30-second oil change system
Engine manufacturer/model	44U877 (M44)
Transaxle type	K46 heavy-duty hydrostatic, two-wheel drive
Transaxle control	Side-by-side pedals
Rear tires	22x9.5-12
Lift system type	Spring-assisted hand-grip lever
Cutting width	Edge™ mower deck, 54 in. 137 cm
U.S. warranty	2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Engine
Power	24 hp 17.9 kW
Displacement	44.2 cu in. 724 cc
Manufacturer/model	44U877 (M44)
Type	Overhead valve, full-pressure lube, oil filter
Cylinders	V-twin - extended life series (ELS)
Governor	Mechanical
Choke/speed control	Single lever with spring-return on choke
Cooling method	Air
Air cleaner	Cartridge with prefilter
Oil change	John Deere Easy Change 30-second oil change system
Fuel system
Type	Gasoline
Fuel delivery	Pulse pump and carburetor
Fuel gauge	Easy-read on dash
Fuel tank location	Rear
Fuel fill opening	Center, 1.75 in. 4.45 cm
Fuel tank capacity	2.4 U.S. gal. 9.1 L
Electrical system
Battery	12 V 300 CCA
Charging system	Regulated, 14 amp
Engine starter	Bendix type
Hourmeter	Yes
Headlights	Two standard, incandescent
Taillights or reflector	Reflectors
Backup lights	No
Rear work lights	No
12-V outlet	No
Transaxle
Type	Hydrostatic, 2-wheel drive
Control	Side-by-side pedals
Cruise control	Standard
Oil cooler	Fins and fan on transaxle
Oil filter	Yes, not serviceable
Differential lock	No
Forward speed	0-5.5 mph 0-8.9 km/h
Reverse speed	0-3.2 mph 0-5.2 km/h
Brakes	Internal wet disk
Chassis
Frame	Full-length welded steel
Primer/paint	E-coat/powder
Weight bracket	Optional rear
Receiver hitch	No
Front axle	Cast iron front axle, front wheel sealed ball bearings
Spindle bushings	No
Front tires	16x6.5-8
Rear tires	22x9.5-12
Hood material	Molded-in color material reduces sound, will not rust or dent
Fender deck material	Stamped steel
Floor mats	Yes, with debris removing channels
Storage	Storage tray with cover
Service interval decal	Yes
Fender handles/grips	Handgrips
Cup holder	Yes
Equipment mounting	CargO Mount™ system
Steering
Type	Sector and pinion with single drag link and tie rod
Four-wheel steer	Not available on this model
Steering wheel	Deluxe, diameter - 14 in. 35.6 cm
Tilt steering wheel	No
Turning radius	18 in. 45.7 cm
Uncut circle radius	18 in. 45.7 cm
Seat
Type	One piece with lumbar adjustment
Seat back height	15 in. 38 cm
Armrests	No
Fore-aft adjustment	While seated, 5.5 in. 14 cm
Seat suspension	Tilt, two coil springs
Lift system
Type	Spring-assisted hand-grip lever
Hydraulic outlets	No
Mower cut height	13 positions, 1-4 in. 2.5-10.2 cm
Cut height increments	0.25 in. 0.64 cm
Preset cut height	No
Mower deck
Type	Side discharge
Cutting width	Edge™ mower deck, 54 in. 137 cm
Construction	Stamped steel deck shell
Mower deck material	Steel, 11 gauge 0.12 in. 3 mm
Mower wash port	Yes
Mower drive system	Electric power take-off (PTO) clutch
Mower wheels	Five
Mower wheel adjustment	One bolt
Mower level adjustment	Easy-level deck
Mower attachability
Type	Slide under tractor
Front draft arms	One spring clip
Rear draft arms	Two spring clips
Mower wheels rotate	No
Drive system	Single belt
Safety
Meets ANSI standard	Yes
Meets OPEI standard	Yes
Backup protection	Reverse Implement Option (RIO)
Safety video	Yes
Buyer's notes
Notes	Molded-in color material reduces sound, will not rust or dent Durable primer and powder paint finish Large, 14-in. (36-cm) steering wheel for more comfortable operation John Deere Easy Change 30-second oil change system
Warranty	2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Optional equipment
Mowers
Rear bagger	2-bag, 6.5 bu 229 L
Powered material collection	Power Flow™ blower
Mulching system	High performance plug
Front thatcher
Front blade	46 in. 116.8 cm
Mid-mount blade
Snow blower	Two-stage, 44 in. 111.8 cm
Rotary broom
Rotary tiller
Sleeve hitch
3-point hitch
Rear power take-off (PTO)
Plow, moldboard
Box scraper
Cultivator
Rear blade
Disk harrow
Landscape rake
Sprayer	Tow-behind, 15 U.S. gal. 56.8 L Mounted, 15 U.S. gal. Tow-behind only, 25 U.S. gal. 94.6 L
Spreader	Tow-behind only, 125-175 lb 57.7-80 kg
Front bumper	Included
Brush guard
Weather protection	Weather enclosure
Sun canopy	Sun canopy
Rear receiver hitch
Bucket holder	Yes, single bucket
Grass striping	Lawn striping kit
Tractor shovel
Front loader
Other equipment
Tow-behind tools	16
Dimensions
Height	45.7 in. 116 cm
Overall length	75.3 in. 191 cm
Wheelbase	48.9 in. 124.2 cm
Width with mower	67 in. 170.2 cm
Width with mower (deflector raised for storage)	57.1 in. 145 cm
Width without mower
Weight	Mower, no fuel, 526 lb 239 kg

Accessories and Attachments

Carts

Utility Cart, 7P Poly - 3080GXLP21935

7P Poly Utility Cart

Every owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

7P Poly Utility Cart

The cart has a premium molded, high-density polyethylene box construction.
Compression molding process allows polyethylene to be the optimum thickness in all areas for superior strength and durability.
Polyethylene body will not rust or dent; it stays looking new longer.
0.75-in. (2-cm) x 2-in. (5-cm) stake pockets are molded in to make the addition of side extensions easy.
Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
Styling is compatible with other John Deere equipment.
Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.

Wheels

7P Utility Cart wheel

Wheels are mounted on a solid, one-piece axle for durability.

Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.

The pneumatic tires offer the following:

Good flotation
Minimal rolling resistance
Shock absorption

Sloped tailgate

Sloped tailgate for easy emptying

A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.

Tractor hitch

Spring-pin tractor hitch

A large-diameter hitch pin provides plenty of strength:

Fast, easy attachment to the tractor hitch
Spring pin to ensure the pin stays in place

Tilt latch

An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

	7P	8Y	10P	10PX	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	180 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	91 lb (41.3 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	84 lb (38 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X	X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

7P Poly Utility Cart
Order number: LP21935

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 8Y Convertible Poly - 3080GXLP22755

8Y Convertible Poly Utility Cart, push mode

8Y Convertible Poly Utility Cart, tow-behind mode

The 8-cu-ft (0.23-m³) capacity 8Y Convertible Poly Utility Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.

Key features include:

Compatible with riding lawn tractors and garden tractors
Durable poly construction
All-terrain pneumatic tires
Converts from tow cart to push cart without tools
Large handle is provided for ease of use

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	10PX	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	180 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	91 lb (41.3 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	84 lb (38 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X	X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

8Y Convertible Poly Utility Cart
Order number: LP22755

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 10P Poly - 3080GXLPPCT10JD

10P Poly Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

Firewood
Lawn debris
Sand
Dirt
Mulch
Garden tools
Plants and bushes

The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:

10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
Will not dent or rust
15x6 tubeless pneumatic tires with turf tread for maximum traction
Easy, hands-free foot pedal dump release
Steep dump angle for complete emptying

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	10PX	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	180 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	91 lb (41.3 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	84 lb (38 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X	X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10P Poly Utility Cart
Order number: LPPCT10JD

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 10PX Poly with full dump - 3080GXLP72978

10PX Poly Utility Cart

10PX Poly Utility Cart full-dump lever

The 10PX tow-behind cart is great for hauling lawn debris, sand, dirt, mulch, and plants:

Large, 650-lb (295-kg) capacity
10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
Will not dent or rust
15x6 tubeless pneumatic tires with turf tread for maximum traction
Easy, hands-free foot pedal dump release

Cart in partial-dump position

Cart in full-dump position

Hand lever releases 180-degree dump angle for complete emptying

Empties all material
Makes cleanup of the cart easier

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	10PX	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	180 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	91 lb (41.3 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	84 lb (38 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X	X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10PX Poly Utility Cart
Order number: LP72978

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 13 Steel - 3080GXLPHDC13JD

13 Steel Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Welded box

Welded box construction provides maximum reliability:

Requires less setup time than the bolted construction.
Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.

Wheels and tires

Wheels are mounted on a solid, one-piece axle for durability.

Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.

Pneumatic tires offer:

Good flotation
Minimal rolling resistance
Shock absorption

Turf-tread tires are used on the 13 Utility Cart.

Deluxe tailgate

Deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

Easy hookup and tilt-dump latch

Spring-pin tractor hitch

Tilt-dump latch

A large-diameter hitch pin provides plenty of strength:

Fast, easy attachment to the tractor hitch
Spring pin to ensure the pin stays in place

The easy-to-use latch allows tilting the bed for easier unloading:

Steep dump angle makes emptying easier.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Model	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

13 Utility Cart
Order number: LPHDC13JD

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 16YS Swivel Poly - 3080GXLP68186

16YS Swivel Cart

The 17-cu-ft (0.48-m³) capacity 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.

Key features include:

Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants
Convenient foot pedal release for easy dumping
Molded stake pockets for enlarging the bed size

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	10PX	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	180 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	91 lb (41.3 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	84 lb (38 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X	X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

16YS Swivel Cart

Order number: LP68186

Oilite is a trademark of Beemer Precision Incorporated.

Utility Cart, 17P Poly - 3080GXLPPCT17JD

17P Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

Firewood
Lawn debris
Sand
Dirt
Mulch
Garden tools
Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Key features of the 17P Utility Cart:

Cart has premium molded polypropylene box construction.
Polypropylene body will not rust or dent, staying new looking longer.
0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.
Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.
Ribs in box bottom add strength and prevent a shovel from hitting bolts when emptying the cart.
Sloped tailgate design makes emptying the box easier; no tailgate to loosen or remove.
Styling is compatible with other John Deere equipment.
16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.
Wheels are mounted on a solid one-piece axle.
Wheels turn on iron/Oilite® bushings with grease fitting for long life.
Spring-loaded dump latch is easy to use.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	10PX	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	180 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	91 lb (41.3 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	84 lb (38 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X	X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

17P Utility Cart
Order number: LPPCT17JD

Oilite is a trademark of Beemer Precision Incorporated.

Complete MCS

6.5-bu (229-L) Hopper, Chute, and Power Flow, 100 Series with 54-in. (137-cm) mower deck - 3080GXBG20747

6.5-bu (229-L) hopper, chute, and Power Flow blower (side view)

6.5-bu (229-L) hopper, chute, and Power Flow blower (rear view)

The medium-priced 6.5-bu (229-L) Power Flow grass collection system expands versatility of the tractor.

The blower and fan are made of polyethylene:

Power Flow is lightweight for easy handling and minimal effect on mowing smoothness.
It will not rust or corrode.
Fan and housing resist wear and abrasion caused by sand.
Contoured design gives a clean appearance and smooth grass flow.
Fan is driven with V-belt from a sheave added to the top right mower spindle.

Specifications

Capacity	6.5 bu (229 L)
Material:
Hopper top	Acrylonitrile butadiene styrene (ABS)
Chute	Polyethylene
Blower housing	Polyethylene
Fan	Ultra-high molecular weight (UHMW) polyethylene
Bags	Polyester
Filling	Directly into bags for emptying on ground or in trailer or into plastic liners
Fan diameter	13 in. (334 mm)
Fan width	2.75 in. (70 mm)
Number of fan blades	4
Fan speed (full engine rpm)	3400

Tractor compatibility and requirements

The 6.5-bu (229-L) hopper, chute, and Power Flow blower is for use with:

S180, E180, D170, LA175, LA150, 190C, and G110 Tractors with 54-in. (137-cm) Mower Deck

Requirements and/or recommendations:

Front ballast is recommended when bagging, especially on hills or inclines.
Use of rear tow-behind attachments that could come in contact with the hopper assembly is not recommended when the hopper assembly is installed.
Special mower blades are not required.

6.5-bu (229-L) hopper, chute, and Power Flow™ blower for 100 Series with 54-in. (137-cm) Mower Deck - 3080GXBUC10288

6.5-bu (229-L) hopper, chute, and Power Flow blower on an S180 (front view)

6.5-bu (229-L) hopper, chute, and Power Flow blower on an S180 (rear view)

Overview

The bagger kit can be set up without tools in minutes, provides efficient bagging performance, and has easy-to-empty bags. This is also commonly known as a material collection system (MCS).

Benefits

Bagging

Two durable bags provide a generous 6.5-bu (229-L) capacity.
The lower chute provides smooth airflow to reduce the chance of plugging.
A duct directs air leaving the hopper toward the ground for clean operation.
Loose-knit bags and a large exit duct allow more air flow to provide complete bag filling in wet grass conditions.

Emptying

Monitor bag filling progress through a window; see light coming through the loose-knit bag or watch for grass lying against it.
The hopper lid stays open while you empty the bags.
The bags slide out with a pull and the handles make emptying easy.
The hopper cover automatically latches when you close it.

Additional details

Front ballast is recommended when bagging, especially on hills or inclines. Follow instructions in your operator’s manual.
Use of rear tow-behind attachments that could contact the hopper assembly is not recommended.
Installation:

Special mower blades are not required for bagging.
The kit is easy to remove and stores compactly. No parts are left behind to interfere with other attachments

The Power Flow blower propels the collected grass and leaves into the hopper.

Contoured design gives a clean appearance and smooth grass flow.
The fan is driven by belt parts included in the kit.
The Power Flow blower cannot be added to a bagger kit that was not originally equipped with it.
The four-blade fan runs at about 3400 rpm when engine speed is full.
The system is lightweight for easy handling.

The 6.5-bu (229-L) hopper, chute, and Power Flow blower are for use with:

Model year 2006 and newer 100 Series Tractors with 54-in. (137-cm) mower deck

MCS 6 Dump-from-Seat Hopper, 100 Series and S240 with 6.5-bu (229-L) hopper - 3080GXLP47167

Dump from the seat capability for 100 Series Tractors with a 6.5-bu material collection system (MCS)

MCS 6

The MCS 6 attachment is designed to provide dump from the seat grass collection/expulsion for John Deere 100 Series and S240 Tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.

The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere Material Collection System, installation is a breeze with simple hand tools.

Features:

Lightweight aluminum construction
Designed for full material expulsion
Easy access self-latching spring tripped handle
Ships almost fully assembled (5 minute handle assembly)
Installs in seconds (after initial assembly)

Benefits:

Easy - Convenient Access to dump handle directly from seat
Clean - No material handling, no mess
Efficient - Unload and go without leaving the seat

NOTE: Fits John Deere 100 Series and S240 Tractor 2-bag material collection systems. Not compatible with EZtrak™ Zero-Turn Mowers.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

MCS 6 attachment
Order number: LP47167

Front Blade

46-in. (117-cm) Front Blade (100 Series and S240) - 3080GXBG20943

46-in. (117-cm) Front Blade

The front blade is excellent for pushing light snow or other loose material.

The blade is constructed for good performance and long life:

Blade surface is curved to roll rather than push material, which requires less power and increased blade capacity.
Bolt-on, replaceable cutting edge takes most of the wear to greatly extend the useful life of the blade.

For operator convenience, the blade comes with standard equipment for controlling it from the tractor seat:

Blade can be angled left, right, or used in the straight-ahead position.

Full working range

The 46-in. (117-cm) blade can be operated up to 6.5 in. (16.5 cm) above ground level.

Floating action is designed into the lift linkage, so the blade is free to follow the contour of the ground.

The lift-linkage design makes raising the blade easy.

Controlled from tractor seat

Left-hand blade control

For operator convenience, the blade comes with angling and lift components as standard equipment so it can be controlled from the tractor seat.

Front blade lift and angling components are included as standard equipment:

Blade can be angled left, right, or used in the straight-ahead position.
For 100 Series Tractors, L100 Series Lawn Tractors, G110 Garden Tractors, and S240 Tractor, lift components are provided with the blade so it can be raised and lowered from the tractor seat.

Specifications

Overall width	46 in. (117 cm)
Overall height	14 in. (36 cm)
Clearing width	46 in. (117 cm)
Angling positions	Three
Lift height	6.5 in. (17 cm)
Net weight	73 lb (33.1 kg)

Tractor compatibility and requirements

The 46-in. (117-cm) Front Blade is compatible with:

102, 115, 125, 135, 145, 155C, and 190C Tractors
L100, L108, L110, L111, L118, L120, and L130 Lawn Tractors, and G110 Garden Tractor
LA100, LA110, LA120, LA130, LA140, and LA150 Tractors
LA105, LA115, LA125, LA135 Limited Edition, LA135 Special Edition, LA145, LA155, LA165, and LA175 Tractors
D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170 Tractors
E100, E110, E120, E130, E140, E150, E160, E170, and E180 Tractors
S100, S110, S120, S130, S140, S160, S170, and S180 Tractors
S220 and S240 Tractors

For model years 2016 and newer, the 46-in. (117-cm) Front Blade (BG20943) has a change to the mounting frame to make it compatible with model year 2016 and newer 100 Series and 200 SeriesTractors:

The model years 2016 and newer Front Blades are also backward compatible with model year 2015 and older 100 and 200 Series Tractors.
The model year 2015 46-in. (117-cm) Front Blade (BG20020) is not compatible with model year 2016 and newer tractors.
- A model year 2016 and newer tractor steering change from a dual drag link system to a single drag link and tie rod design causes interference with older front blades.

Attachment			Tractors
Model year	Description	Order code/attachment number	2015 and prior	2016 and newer
2015 and prior	46-in. (117-cm) Front Blade	BG20020	X
2016 and newer	46-in. (117-cm) Front Blade	BG20943	X	X

Requirements and/or recommendations:

Rear weights and tire chains are required for additional traction.

Home Maintenance Kits

Home maintenance kit - 3080GXAUC13706

Miscellaneous

Battery charger and maintainer - 3080GXTY25866

Battery charger

This fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:

Automatically determines if the battery is 6- or 12-V and adjusts accordingly
Helps maintain battery in good condition and ensures it is fully charged
Powers on to charge battery and powers off when fully charged
'Onboard' feature allows mounting next to the battery on collector, street rods, and other occasional-use vehicles
1.5-amp trickle charges small batteries in 2 to 12 hours
Maintains large battery charges
Hookup protection guards battery and charger from damage

Includes a choice of battery connection methods:

Standard color-coded clips to connect to any battery
Cable with quick-disconnect plug and end loops that can be bolted to battery terminals and easily unplugged from charger when not in use

Bucket holder (single) - 3080GXLPJD100

Bucket holder (single)

Transporting mulch, plants, or debris is easier with the CargO Mount™ single bucket holder. Just slip the holder bracket into the tractor's rear CargO Mounts. For use with any standard 5-gal. (19-L) or 6-gal. (23-L) bucket, the bucket holder is designed to carry up to 70 lb (32 kg) of material.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (single)
Order number: LPJD100

Fuel-Protect for gasoline engines, 8 oz (237 mL) - 3080GXTY27534

8-oz (237-mL) Fuel-Protect gasoline stabilizer

John Deere Fuel-Protect gasoline stabilizer is a unique formula developed to ensure optimum performance and protection year-round:

Has corrosion preventers
For lawn and garden equipment and other gasoline-powered vehicles
Ensures quick starts in all two- and four-cycle engines
Use in gasoline, gasoline-oil mixture, and ethanol blends
Use to treat gas cans at each fill-up or use at every fill-up of vehicle
Keeps fuel fresh for 12 months
Contains a fuel injector and carburetor cleaner
1 oz (29.6 mL) treats 2 gal. (7.6 L)

Always use fuel stabilizer in gasoline.

Fuel sitting in gas tanks or gas containers for more than 30 days begins to degrade. Also, blended fuels and water in gasoline can form acids that corrode fuel-system components. Protect the investment - use John Deere fuel stabilizer with corrosion preventers and prevent hard starting, surging, lack of power, poor idle, flooding, and will not run or stay running conditions caused by poor-quality fuel. Ask a local John Deere dealer or visit John Deere Parts.

Helpful tips:

Add fuel stabilizer every time fuel is purchased.
Deere gasoline-powered equipment is recommended to run on a minimum of 87 octane gasoline.
John Deere Fuel-Protect for gasoline is safe to use in all types of gasoline, including gasoline/oil mixtures and blended fuels containing up to 10 percent ethanol.
Use plastic fuel containers to store fuel; ask a local John Deere dealer.
For best results, use a spill-proof gas can that automatically seals the gas can vent.
Store fuel in a cool, dry, dark place in a sealed fuel can.
Fill tank to the top every time the machine is put away.
- Make sure tank is drained if stored for the winter or treated if left for prolonged periods of time.

Please refer to the operator’s manual for additional recommendations and warranty information.

Fuel related issues are not considered a warrantable condition as there is no defect in the materials or workmanship of the machine.

For more information on fuel, visit John Deere Groundscare.

MowerPlus™ deluxe smart connector - 3080GXBUC10929

Deluxe smart connector

The John Deere MowerPlus deluxe smart connector wirelessly links some 100 and 200 Series Tractor models and Z500 Series ZTrak™ Mowers to the MowerPlus app on a mobile device:

No tools are needed for installation.
Detailed setup instructions are included.
The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on or off, and the mobile device app is running within range.
The wireless connector and app work together to offer helpful information.

Equipment features available for viewing on the MowerPlus app include:

Tractor engine hours automatically synchronized to the app
In-app maintenance reminders and log, based on engine hours
Fuel level - even when away from the tractor, the app remembers information from the last synchronization, such as the fuel level.
- When thinking ahead about Saturday morning mowing, the operator can make sure the tractor is fueled and ready to go.
Help to determine the best time to mow
Expert pre-mow optimization tips
Maintenance walk-through instructions

The operator is able to visit their device’s app store to see new app features as they are added.

Since the smart connector communicates instrument cluster information, future app releases will provide additional operating recommendations and notifications.

Smart connector, wiring harness, and twist ties

One end of the wiring harness plugs into the back of the fuel gauge. The other ends plug into the smart connector and the tractor's wiring harness. The Z500 Mowers come with a dedicated connectivity connector, so the new wire harness is not needed.

Compatibility and requirements

MowerPlus deluxe smart connector (BUC10929) is for use with the following lawn tractors and ZTrak Mowers:

All S120, S130, S160, S170, and S180 Tractors
Model year 2021 and newer S240 Tractors (serial number 880,001-)
Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)

The MowerPlus smart connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store.

NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.

Bluetooth is a trademark of Bluetooth SIG, Inc.

Mower Blades

Blade kit, 54-in. (137-cm) mulching - 3080GXGY20686

Blade kit, 54-in. (137-cm) side discharge - 3080GXGY20684

StarLock blade design

Blades with the StarLock™ mounting system are available for normal, difficult mulching, and bagging conditions.

Mower Decks

54-in. (137-cm) replacement mower deck (100 Series) - 3080GXBG20945

54-in. (137-cm) Mower Deck, top

54-in. (137-cm) Mower Deck, underside

A complete 54-in. (137-cm) Mower Deck can be ordered for replacement if required. Mower comes with three standard blades, that work well when side-discharging and when using the 54C Power Flow^TM collecting system.

Mulching blades are included in the mulching attachment for this mower.

Grass Striping Groomer for 48-in. (122-cm) or 54-in. (137-cm) Deck - 3080GXLP1002

Striping kit brush - top view

Striping kit brush - side view

Features and benefits

Homeowners can achieve results just like the professionals
Brush is easy to adjust for varying mower cutting height
Brush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turf
The brush striping kit is a very economical and functional attachment

Compatible with the following:

48-in. (122-cm) or 54-in. (137-cm) Mower Deck for model year 2018 and newer 100 Series Tractors (including S and E prefix)
48X or 54X - 48-in. (122-cm) or 54-in. (137-cm) Side-Discharge Mower for X300, X320, X324, X340, X360, X500, X520, X530, X534, X540, and X590 (model year 2015) Tractors

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Mower deck leveling gauge - 3080GXAM130907

Mower deck leveling gauge

Leveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.

Can be used for:

Lawn tractors
Lawn and garden tractors
Riding mowers
Front mowers
Commercial walk-behind mowers
Zero-turn-radius mowers

Mulch Kits

Mulching attachment, 54-in. (137-cm) - 3080GXBG20304

Mulch kit components

Operating tips for 54-in. (137-cm) mulching kit

Mulching:

Adjust baffle to the proper opening; the adjustable baffle can be moved to one of five positions to match conditions using the convenient wing nuts.
- When mulching grass, the operator should start with the baffle set in the highest position (greatest opening).
- In drier conditions or when mulching leaves, the baffle can be moved down to reduce the amount of material that is discharged.
- The holes in the adjustable baffle are intended for leaf mulching. When mulching dry leaves, the holes will allow some air and leaf particles to escape, reducing blowout in other areas of the mower. However, when mulching grass, these holes can be expected to plug.
Mow when grass is dry.
Observe the one-third rule.
- No more than one third of the grass blade should be cut off at one time. This allows more efficient mulching and will promote the continued good health of the grass. If the desired cut height cannot be achieved by cutting off one third, or there is clumping of the clippings, it may be required to cut higher. Wait a day, then lower the mower and make a second pass.
Mow at proper intervals - approximately every four to five days.
Always mow with sharp blades.
When using the mulch kit, clippings are held in suspension under the mower until the power take-off (PTO) is shut off or the engine speed is reduced to slow the mower blades. When ready to stop mulching, slowing the engine speed while continuing to drive over the cut area will allow the suspended clippings to fall and disperse more evenly over the lawn.

Tips for special situations:

If mulching performance is not satisfactory, raising the mower to increase cut height, even a little bit, will often make a big difference.
If excessive clippings appear at the left edge of the mower, the left rear mower lip should be removed (if the mower is so equipped). This will promote better distribution of clippings.

Side-discharging and using the Power Flow™ material collection system (MCS):

For side-discharging and using the 54C Power Flow MCS, remove the mulching attachment.
The special mulching blades may be used if satisfactory results are achieved. If not, remove and replace with standard blades.
Rubber front edges can be left on if side discharging, however, cut quality may be reduced slightly when mowing lush grass.

Bagging:

Remove mulching attachment and install the appropriate medium or high lift blade(s).

Installation and removal:

The 54-in. (137-cm) Tricycler kit can be easily removed while the mower is mounted on the tractor.

Only two cap screws and nuts, located at the front and right side of the mower, need to be removed.

Protection

Riding mower cover, for tractor with material collection system - 3080GXLP70686

Key features:

Protects against sun damage, rain, dust, and tree sap
Split back for fast fitting and easy access after installation
Fabric is coated for maximum water resistance and repellency
Reinforcements at key locations
Reinforced air vent lets air circulate and helps prevent ballooning in wind
Storage pocket reverses to attractive stuff case

For For use with:

100 Series and 200 Series Tractors with MCS installed
X300 Series Tractors with 42-in. (107-cm) Mower Deck and MCS installed

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

Riding mower cover for tractor with MCS
Order number: LP70686

Riding mower cover, medium deluxe - 3080GXLP93617

Protective cover (medium deluxe)

Features include:

Wipe-clean reinforced bottom around mower deck
Easy-on side handles makes snugging down cover a snap
Dual reinforced air vents let air circulate and help prevent ballooning in wind
Interior lining and integrated muffler heat shield
Heavy-duty fabric will not shrink or stretch and is coated for maximum water resistance
Easy-on split back for fast fitting and easy access after installation
Handy storage pocket reverses into an attractive storage case
Two-year warranty

Cover provides heavy-duty protection for 100 Series, LT, LX, and 200 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (medium deluxe)

Order number: LP93617

Riding mower cover, standard - 3080GXLP93917

Protective cover (standard)

Features include:

Dual vents let air circulate and help prevent ballooning in wind
Elastic shock cord in bottom hem for a quick, custom-like fit
Coated fabric for maximum water protection
One-year warranty

Cover provides all-season protection for 100 Series, 200 Series, and Select Series™ X300 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (standard)

Order number: LP93917

Seat cover, low standard yellow - 3080GXCPLP22704

Seat cover, medium standard yellow - 3080GXLP92324

Seat cover, standard medium

Seat cover protects new seats and renews old seats:

Cushioned seat for extra comfort
Four convenient pockets for keeping tools and gear within reach
Elastic cord in bottom hem for a custom fit
Medium size fits seats with backrests up to 15 in. (381 mm)

Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, standard medium
Order number: LP92324

Spark Arrester

Spark arrester - 3080GXAUC17789

AUC17789 spark arrester shown

NOTE: Spark arrester design and appearance vary depending on the muffler outlet. Photo is representative of some spark arrester designs.

A spark arrester is a device for preventing the escape of sparks. In some locations, the law requires that purchasers of certain products be given written notice that it is illegal to use such machines on forest-covered, brush-covered, or grass-covered land (except on watered lawns) without a spark arrester.

This kit complies with laws in the state of California, requiring its use under certain conditions. For further information on this law, consult No. 442.5 of the California Public Resources Code.

Sprayers

Mounted Sprayer, 15 gal. (57 L) (100 and 200 Series) - 3080GXLP53283

15-gal. (57-L) Mounted Sprayer for 100 and 200 Series

The 15-gal. (57-L) tractor-mounted sprayer is compatible with the 100 and 200 Series Tractors. Convenient mounting, easy maneuverability, and overall versatility make this a perfect choice for a John Deere lawn tractor. It provides an excellent way to apply spray material, including liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 32-in. (81-cm) boom that sprays a 60-in. (152-cm) spray swath. It is also equipped with a 19-ft (5.8-m) hose and a spray wand for spot spraying lawns, shrubs, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft (9.1 m). It has a custom mounting bracket that utilizes the existing frame holes for no-tools mounting after initial assembly. A recirculation kit is included.

Features include:

Custom mounting hardware uses existing frame holes
Mounts in seconds after initial assembly
Compatible with 100 and 200 Series Tractors
SHURflo® 100 psi, 2.1 gpm (8 L/min) on-demand diaphragm-type pump is designed for high-hour commercial applications. It can be run dry without damage.
The brass-tipped spray wand is included as standard equipment. It is constructed of non-corrosive polypropylene material with Viton® components for multi-use applications.
Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
Recirculation keeps material mixed and moving
Control valve directs spray to either the boom or spray wand
Convenient electrical hookup includes all necessary wiring
Rugged translucent yellow tank with molded fill-level indicators (in gal. and L)

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

15-gal. (57-L) Mounted Sprayer for 100 and 200 Series Tractors

Order number: LP53283

SHURflo is a trademark of SHURflo, LLC.

Viton is a trademark DuPont Performance Elastomers.

Tow-Behind Sprayer, 15 gal. (57 L) - 3080GXLP19478

15-gal. (57-L) Tow-Behind Sprayer

Sprayer comes complete with a boom that sprays 60 in. (152.4 cm) wide. It also has a 12-ft (3.7-m) hose with an adjustable handgun for spot spraying lawns, shrubs, etc.

Features include:

This sprayer is an excellent choice for spraying small- to moderate-size lawns and shrubs.
Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft (9.1-m) high.
A 14-in. (35.6-cm) wand on the handgun is standard equipment to give added convenience when spraying trees.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties:

Sprayers provide an excellent way to apply liquid fertilizer.
Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

Fertilizer is more readily available to plants.
The fertilizer need not be worked into the soil by watering or rain before it will work.
Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use these sprayers with liquid-base lawn care chemicals only. They are not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

15-gal. (57-L) Tow-Behind Sprayer

Order number: LP19478

Tow-Behind Sprayer, 25 gal. (95 L) - 3080GXLP19479

25-gal. (95-L) Tow-Behind Sprayer

Sprayer comes with a wider boom that sprays a 90 in. (228.6 cm) width. A 15-ft (4.6-m) hose and handgun are provided.

Features include:

100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
Sprayer is designed to be a good choice for customers with larger lawns with trees to care for or for light commercial spraying.
Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft (9.1 m) in height.
The 14-in. (35.6-cm) wand on the handgun is included as standard equipment.

Sprayers provide an excellent way to apply liquid fertilizer.
Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

Fertilizer is more readily available to plants.
The fertilizer need not be worked into the soil by watering or rain before it will work.
Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use this sprayer with liquid-based lawn care chemicals only. It is not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

25-gal. (95-L) Tow-Behind Sprayer

Order number: LP19479

SHURflo is a trademark of SHURflo, LLC.

Spreaders

Pull-Type Spin Spreader, 125 lb (57 kg) - 3080GXLP25353

125-lb (57-kg) Pull-Type Spin Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

Seed
Fertilizer
Insecticide
Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

Positive on/off system (no cables)
125-lb (57-kg) capacity corrosion-resistant polyurethane hopper
13-in. (33-cm) pneumatic tires for easy rolling
Enclosed gearbox (metal gears)
Ergonomic dual handle featuring Accu-way™
Accu-way even spread pattern adjustment
Includes screen and cover

Accu-way is a trademark of Spyker Spreaders, Inc.

Hopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

Dial position locks and unlocks automatically.
More than 80 settings provide an accurate application of materials.

Specifications

	125-lb (57-kg) Pull-Type Spreader	175-lb (79-kg) Pull-Type Spreader
Recommended market	Homeowner	Homeowner
Type	Tow-behind	Tow-behind
Bundle number	LP25353
Box capacity	125 lb (57 kg), 2.5 cu ft (0.07 m3)	175 lb (79 kg), 3.5 cu ft (0.1 m3)
Hopper size, in. (cm)	14.5x25.25x19.75 (36.8x64.1x50.2)	18.5x27.5x21.5 (47x69.9x54.6)
No-rust versatility
Hopper	Polyethylene	Polyethylene
Hopper screen	Aluminum	Aluminum
Hopper bottom plate	Stainless steel	Stainless steel
Throat opening, in. (cm)	0.81x2.75 (2.1x7)	0.81x2.75 (2.1x7)
Connecting hardware	Stainless steel	Stainless steel
Accurate application
Rate control	80-setting Dial-A-Matic knob	80-setting Dial-A-Matic knob
Rate gate	No-stick nylon	No-stick nylon
Rate gate linkage	Stainless steel	Stainless steel
Even dispersal
Spinner, in. (cm)	12 (366)	12 (366)
Spread pattern, ft (m)	10 to 12 (3.1 to 3.7) wide	10 to 12 (3.1 to 3.7) wide
Spread pattern equalizer	Accu-way™	Accu-way
Spinner shaft	Zinc-plated steel	Zinc-plated steel
Rotary agitator	Stainless steel	Stainless steel
Miscellaneous
Frame	Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steel	Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel
Frame width, in. (cm)	18 (45.7)	18 (45.7)
Drive gears	Heavy-duty die-cast metal	Heavy-duty die-cast metal
Axle	0.63-in. (15.9-cm) solid steel, zinc plated	0.63-in. (15.9-cm) solid steel, zinc plated
Wheels/tires	13-in. x 5-in. (33-cm x 13-cm) pneumatic	13-in. x 5-in. (33-cm x 13-cm) pneumatic
Recommended travel speed	3.5 mph (5.6 km/h)	3.5 mph (5.6 km/h)
Warranty	One-year limited	One-year limited
Net weight, lb (kg)	29 (13.2)	34 (15.4)

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

125-lb Pull-Type Spin Spreader

Order number: LP25353

Pull-Type Spin Spreader, 175 lb (80 kg) - 3080GXLP25354

175-lb (79-kg) Pull Spreader

Seed
Fertilizer
Insecticide
Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

Positive on/off system (no cables)
175-lb (79.4-kg) capacity corrosion-resistant polyurethane hopper
13-in. (33-cm) pneumatic tires for easy rolling
Fully enclosed gear box with metal gears for long life
Accu-way even spread pattern adjustment
Includes screen and cover

Hopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

Dial position locks and unlocks automatically.
More than 80 settings provide an accurate application of materials.

Specifications

	125-lb (57-kg) Pull-Type Spreader	175-lb (79-kg) Pull-Type Spreader
Recommended market	Homeowner	Homeowner
Type	Tow-behind	Tow-behind
Bundle number	LP25353
Box capacity	125 lb (57 kg), 2.5 cu ft (0.07 m3)	175 lb (79 kg), 3.5 cu ft (0.1 m3)
Hopper size, in. (cm)	14.5x25.25x19.75 (36.8x64.1x50.2)	18.5x27.5x21.5 (47x69.9x54.6)
No-rust versatility
Hopper	Polyethylene	Polyethylene
Hopper screen	Aluminum	Aluminum
Hopper bottom plate	Stainless steel	Stainless steel
Throat opening, in. (cm)	0.81x2.75 (2.1x7)	0.81x2.75 (2.1x7)
Connecting hardware	Stainless steel	Stainless steel
Accurate application
Rate control	80-setting Dial-A-Matic knob	80-setting Dial-A-Matic knob
Rate gate	No-stick nylon	No-stick nylon
Rate gate linkage	Stainless steel	Stainless steel
Even dispersal
Spinner, in. (cm)	12 (366)	12 (366)
Spread pattern, ft (m)	10 to 12 (3.1 to 3.7) wide	10 to 12 (3.1 to 3.7) wide
Spread pattern equalizer	Accu-way™	Accu-way
Spinner shaft	Zinc-plated steel	Zinc-plated steel
Rotary agitator	Stainless steel	Stainless steel
Miscellaneous
Frame	Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steel	Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel
Frame width, in. (cm)	18 (45.7)	18 (45.7)
Drive gears	Heavy-duty die-cast metal	Heavy-duty die-cast metal
Axle	0.63-in. (15.9-cm) solid steel, zinc plated	0.63-in. (15.9-cm) solid steel, zinc plated
Wheels/tires	13-in. x 5-in. (33-cm x 13-cm) pneumatic	13-in. x 5-in. (33-cm x 13-cm) pneumatic
Recommended travel speed	3.5 mph (5.6 km/h)	3.5 mph (5.6 km/h)
Warranty	One-year limited	One-year limited
Net weight, lb (kg)	29 (13.2)	34 (15.4)

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb Pull-Type Spin Spreader
Order number: LP25354

Tow-Behind Aerator-Spreader, 40 in. (102 cm) - 3080GXLPAS40JD

40-in. (102-cm) Tow-Behind Aerator Spreader

The 40-in. (102-cm) Aerator Spreader can do two jobs at once. It perforates the soil while the calibrated drop-spreader follows with seed, lime, or fertilizer. It can also be used to just aerate the lawn:

40-in. (102-cm) width, with up to 2 in. (5.1 cm) of penetration
132 steel-tine tips on 8-in. (20-cm) diameter tine stars
Three-position, full-sized lift lever
Direct spreader drive for consistent performance
Adjustable flow control
100-lb (45-kg) spreader capacity
4.10/3.5-4 pneumatic tires for easy pulling
75-lb (34-kg) capacity weight tray

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Width	40 in. (101.6 cm)
Aerator depth	Up to 2 in. (5.1 cm), two positions
Spreader capacity	100 lb (45 kg)
Tines
Number of tips	132
Diameter	8 in. (20.3 cm)
Material	Steel
Lift adjuster	Manual
Wheels	4.10/3.5-4, pneumatic
Drive	Direct
Weight-tray capacity	100 lb (45 kg)

Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

Rear wheel weights are recommended for additional traction.
The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for 100 Series, 200 Series, Select Series™ X300s, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Aerator Spreader

Order number: LPAS40JD

Tow-Behind Broadcast Spreader, 130 lb (59 kg) - 3080GXLP39087

130-lb (59-kg) Pull-Type Spin Spreader

Broadcasts fertilizer, weed control, grass seed or ice melter products while towing behind a riding lawn tractor. 130-lb (59-kg) polyethylene hopper resists rust and is easier to clean. Spread pattern will go up to 12 ft (31 cm) depending on speed and material. New direct rod control with easy to reach handle opens and closes the material gate. Heat treated steel gears with plastic enclosure are protected from corrosive material. Large knobby tread tires roll easily over turf.

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

130-lb Pull-Type Spin Spreader
Order number: LP39087

Tow-Behind Broadcast Spreader, 175 lb (80 kg) - 3080GXLPBS36JD

Broadcast Spreader

This 175-lb (79-kg) pull-type broadcast spreader is designed for homeowner use:

The polyethylene hopper will not dent or rust.
All stainless-steel interior hardware, shaft, and agitator help to prevent corrosion.
Large pneumatic turf tires ensure a positive drive and smooth operation.
High-speed, 6:1 reduction glass-filled nylon gears provide the widest spread pattern at the slowest speeds.
Fully enclosed gearbox eliminates downtime and maintenance.
Autoflow feature stops the flow of materials - automatically - to prevent burns.
Directional spread-pattern control feature provides positive shutoff along sidewalks and driveways.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb (79-kg) Broadcast Spreader

Order number: LPBS36JD

Sun Protection

Sun canopy - 3080GXLP68122

Sun canopy

The sun canopy provides protection from the sun's rays and gives the operator some cooling shade during the hot summer days.

Quick sun protection:

Slips into CargO Mount™ system ports for quick installation
Protects operator from the sun’s rays
Tough woven polyester construction for strength and durability
Designed to fit model year 2011 and newer 100 and 200 Series Tractors

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

Sun canopy
Order number: LP68122

Thatchers

Tow-Behind Thatcherator, 40 in. (102 cm) - 3080GXLPTA40JD

40 in. (102-cm) Tow-Behind Thatcherator

The 40-in. (102-cm) Thatcherator can be used as a dethatcher or an aerator. It can also be used to prepare an area for seed:

40-in. (102-cm) width to cover ground fast
20 spring-loaded tines for maximum performance
Three-position adjustment
Weight tray to allow increased scratching power

An 8-in. (20-cm) extension is available to provide widths of 48 in. (122 cm) and 56 in. (142 cm). Add an extension to one end of the thatcherator to make it 48-in. (122-cm) wide and an extension to both ends for a 56-in. (142-cm) width.

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Width	40 in. (101.6 cm)
Tines
Number	20, spring-loaded tips
Diameter	0.19 in. (0.5 cm)
Material	Steel
Weight tray capacity	100 lb (45 kg)
Lift adjuster	Three positions
Wheel
Size	8 in. (20.3 cm)
Tread	Rib
Material	Steel
Optional extension	8 in. (20.3 cm)

Requirements and/or recommendations:

Rear wheel weights are recommended for additional traction.
For use with the following John Deere vehicles and other lawn and garden tractors of similar size:
- 100 Series Tractors
- 200 Series Tractors
- X300 Series Tractors
- X500 Series Tractors
- X700 Series Tractors

Ordering information

Contact a local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Thatcherator

Order number: LPTA40JD

Tire Chains

TerraGrip traction belts (pair) for 20x10-8 Turf Saver and 22x9.5-12 tires - 3080GXLP39857

TerraGrip Traction Belt

Protect your driving surface. TerraGrip Traction Belts offer enhanced traction on snow, mud, dirt, wet asphalt, and wet concrete surfaces. They will not scratch or chip concrete, asphalt, or aggregate drives or walkways. The proven reliability of the traditional steel chain attachment system is used and combined with the performance and durability of reinforced rubber slats. The rubber slats wrap around the tire so only rubber touches the driving surface. The result is aggressive traction without the risk of surface damage, that can happen with traditional chains.

Features:

Rubber slats surround the tire and will not damage driveways or sidewalks.
No steel touches the driving surface.
No-tools installation utilizes a traditional steel chain attachment system.
Traction is improved on all surfaces, especially loose material (snow, dirt, mud, sand, etc.).
TerraGrip Traction Belts are approved for John Deere 100, 200, X300, X500 M-T, and X700 Series Tractors.

Additional information for 4-wheel-steer tractor models:

X700 Series – requires wheel spacer sold separately
X500 Series – requires wheel stop adjustment
X300 Series – no additional requirements

Tire chains (pair) for 20x10-8 Turf Saver and 22x9.5-12 tires - 3080GXTY25229

Tire chain with optional wheel weights on X728 Tractor

Chains are recommended for extra traction when using equipment such as a snow blower or front blade.

One pair of chains is included in each bundle.

Compatibility

TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, D125, E100, E110, E120, S100, S110, S120, and S140 Tractors.

TY16200 tire chains - 20x10-8 (for some models), 20x10-10
NOTE: For LA135 SE, LA145, LA155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.

TY25229 tire chains - 20x10-8 (for some models), 22x9.5-12
NOTE: For LA165, LA175, D130, D140, D150, D155, D160, D170, E130, E140, E150, E160, E170, E180, S130, S160, S170, S180, and S220 Tractors.

TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.

TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.

TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.

TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016 and newer (serial number 040,000-) X734 and X754.

TY25326 tire chains - 26x10.5-12
NOTE: For model year 2015 and older (serial number -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.

TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.

Tow Behind

Lawn Sweeper, 42 in. (107 cm) - 3080GXLPSTS42JD

42-in. (107-cm) Lawn Sweeper

The 42-in. (107-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

42-in. (107-cm) clearing width
17-bu (599-L) capacity to make fast work of picking up material
Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
Hitch has seven positions to match up correctly with a variety of vehicles
Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space

Quality design

Specifications

Brush height	Sweeping conditions
Ground level to 1 in. (25 mm) above	Smooth surfaces - driveways, parking lots, and sidewalks
1 in. (25 mm) to 2 in. (50 mm)	Mowed lawns under normal conditions, or light leaves
2 in. (50 mm) to 3 in. (75 mm)	High grass, heavy leaves, or heavy grass clippings

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

42-in. (107-cm) Tow-Behind Lawn Sweeper
Order number: LPSTS42JD

Lawn Sweeper, 44 in. (112 cm) - 3080GXLP49038

44-in. (112-cm) Lawn Sweeper

The 44-in. (112-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

44-in. (112-cm) clearing width
17-bu (599-L) capacity to make fast work of picking up material
Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
Hitch has seven positions to match up correctly with a variety of vehicles
Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space

Quality design

Specifications

Brush height	Sweeping conditions
Ground level to 1 in. (25 mm) above	Smooth surfaces - driveways, parking lots, and sidewalks
1 in. (25 mm) to 2 in. (50 mm)	Mowed lawns under normal conditions, or light leaves
2 in. (50 mm) to 3 in. (75 mm)	High grass, heavy leaves, or heavy grass clippings

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

44-in. (112-cm) Tow-Behind Lawn Sweeper
Order number: LP49038

Lawn sweeper dethatcher kit (LPSTS42JD) - 3080GXLP42108

Dethatcher kit for sweeper

This John Deere dethatcher kit has two rows of individually flexing tines that gently but effectively remove grass clippings, leaves, and other lawn debris from your lawn. The kit easily attaches to the front of John Deere's 42-in. (107-cm) Lawn Sweeper (LPSTS42JD) to add thatch pickup to the sweeper's cleaning abilities. The dethatcher does not need to be removed to resume regular sweeping use.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Dethatcher kit for sweeper

Order number: LP42108

MT42C Multi-Tool 42 in. Combo (Plug Aerator and Thatcher) - 3080GXLP39089

Multi Tool

The Multi Tool includes one platform and two separate attachments, saving space and money.

Includes 40-in. (101.6-cm) weight tray - capable of holding up to 100 lb (45.4 kg) of weight
Includes pre-assembled core aerator - reduces soil compaction allowing air, water, and fertilizer to the grass roots
Includes dethatcher - removes unwanted debris from the top of the soil to allow nutrients to reach the grass roots
Elongated handle - makes it easier to raise into transport or lower for use
Spring assisted lever - makes changing the attachments quick and easy

John Deere has combined the best lawn tools into one package.

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Multi Tool

Order number: LP39089

Tow-Behind Lawn Roller, 18 x 36 in. (46 x 91 cm) Poly - 3080GXLPPRT36JD

36-in. (91-cm) Tow-Behind Lawn Roller

The Lawn Roller packs down sod, seed, and mole ridges. Its tough polyethylene drum does not dent or rust. The drum's rounded ends do not gouge the lawn or make ruts:

36-in. (91-cm) wide polyethylene drum
390-lb (177-kg) weight for excellent leveling
Rounded end caps to reduce gouging
42-U.S. gal. (159-L) capacity
Long-lasting Nylatron® bearings

Quality design

Specifications

Width	36 in. (91 cm)
Roller
Size	36 in. x 18 in. (91 cm x 46 cm)
Capacity	42 U.S. gal. (159 L)
Weight (filled)	390 lb (177 kg)
Drum/end-cap material	High-density polyethylene (HDPE)
Bearings	Nylatron

Requirements and/or recommendations:

Rear wheel weights are recommended for additional traction.
For use with the following John Deere vehicles and other lawn and garden tractors of similar size:

100 Series Tractors
200 Series Tractors
X300 Series Tractors
X500 Series Tractors
X700 Series Tractors

Ordering information

Contact a local John Deere dealer for availability and pricing information.

36-in. (91-cm) Tow-Behind Lawn Roller

Order number: LPPRT36JD

Nylatron is a trademark of Mitsubishi Chemical Advanced Materials Inc.

Tow-Behind Plug Aerator, 40 in. (102 cm) - 3080GXLPPA40JD

40-in. (102-cm) Tow-Behind Plug Aerator

The 40-in. (102-cm) Plug Aerator removes plugs of soil up to 3-in. (7.6-cm) deep to allow penetration of air, water, and nutrients. It also helps relieve soil compaction:

40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
Three-position lift handle for 2-in. (5-cm) or 3-in. (7.6-cm) plug lengths
28 carbonized, 16-gauge, 0.06-in. (1.5-mm) steel, individually serviceable plugging tines
1-in. (2.5-cm) diameter high-carbon steel-tine shaft
4.10/3.50-4 pneumatic tires for easy pulling
175-lb (79-kg) capacity weight tray

Quality design

Specifications

Width	40 in. (101.6 cm)
Aerator depth	Up to 3 in. (7.6 cm)
Tines
Number of tips	28
Spacing	6 in. (15.2 cm) apart
Material	Carbonized, 16-gauge, 0.6-in. (1.5-mm) steel
Lift adjuster	Manual, three position
Wheels	4.10/3.5-4, pneumatic
Weight-tray capacity	175 lb (79.4 kg)

Vehicle compatibility and requirements

Requirements and/or recommendations:

Rear wheel weights are recommended for additional traction.
For use with the following John Deere vehicles and other lawn and garden tractors of similar size:

100 Series Tractors
200 Series Tractors
X300 Series Tractors
X500 Series Tractors
X700 Series Tractors

Ordering information

Contact a local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Plug Aerator

Order number: LPPA40JD

Tow-Behind Spiker Aerator, 40 in. (102 cm) - 3080GXLPSAT40JD

40-in. (102-cm) Tow-Behind Spiker Aerator

The 40-in. (102-cm) Spiker Aerator penetrates soil, allowing air, water, and nutrients to enter the lawn. It also relieves soil compaction:

40-in. (102-cm) width with up to 2 in. (5 cm) of penetration
10-in. (25-cm) diameter steel-tine stars
132 steel-tine tips on 11 spike wheels
3.5-in. (9-cm) spike-wheel spacing
Full-sized lift lever
4.10/3.5-4 pneumatic tires for easy pulling
100-lb (45-kg) capacity weight tray 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration

Quality design

Specifications

Width	40 in. (101.6 cm)
Aerator depth	Up to 2 in. (5.1 cm)
Tines
Number of tips	132
Diameter	10 in. (25.4 cm)
Spacing	3.5 in. (8.9 cm) apart
Material	Steel
Lift adjuster	Manual
Wheels	4.10/3.5-4, pneumatic
Weight tray capacity	100 lb (45 kg)

Requirements and/or recommendations:

Rear wheel weights are recommended for additional traction.
For use with the following John Deere vehicles and other lawn and garden tractors of similar size:

100 Series Tractors
200 Series Tractors
X300 Series Tractors
X500 Series Tractors
X700 Series Tractors

Ordering information

Contact a local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Spiker Aerator

Order number: LPSAT40JD

Weather Enclosures

Weather enclosure - 3080GXLP74604

Weather enclosure shown on S180 Tractor

The roomy steel-frame cab shields you against snow, rain, sun, and wind to make snow removal a more pleasant experience.

This weather enclosure is compatible with model year 2011 and newer 100 Series and 200 Series Tractors:

Model year 2011 and newer 100 Series Lawn Tractors including all models with prefix of D, E, and S
All 200 Series Lawn Tractors

Access slot for control arm (zipper closed)

Access slot for control arm (zipper open)

Key features include:

Double-zipper slots located mid-door on both the right and left side allow easy access to control arms and enhance isolation from the elements
Forward-raked windshield helps reduce snow and ice accumulation for improved operator visibility
Super-clear vinyl windows are cold-crack tested to -20 °F (29 °C)
Double-zipper access slot for snowblower chute-control cable and chute crank
Assembles and installs with standard hand tools in about one hour
Frame-mounted attachment bracket for fixing chute-control handle and chute-crank handle within the cab
Internal non-scratch magnets ensure a custom fit around the tractor’s fender deck
Rear locking panel holds enclosure tight against tractor frame
Overall height from ground to the top of cab is 78 in. (198 cm)

Ordering information

Contact your local John Deere dealer for availability and pricing information.

Weather enclosure

Order number: LP74604

Weights

30-lb (14-kg) Wheel Weight (1), cast iron, 8-in. front wheel - 3080GXBM17964

30-lb (13.6-kg) front wheel weight

One 30-lb (13.6-kg) cast-iron weight may be installed on each front wheel for additional stability when operating on hillsides or with heavy rear equipment.

Requirements:

Mounting may require drilling two holes in the wheel rim.
BM17978 mounting hardware kit is required for each weight.

NOTE: Front wheel weights are not available for special-edition tractors because the styled front wheel design does not have appropriate holes for mounting the wheel weights and no adapter is available.

Quik-Tatch Weight, 42 lb (19 kg), boxed - 3080GXBG20029

Rear weight bracket shown with two 42-lb (19.1-kg) weights

Rear weight bracket

The rear suitcase weight provides extra ballast that is needed to reduce wheel slippage and increase snow-removal capability.

Rear weight bracket (100 Series) - 3080GXBG20627

Rear weight bracket (BG20022 shown)

Rear weight bracket shown with two 42-lb (19.1-kg) weights

The rear weight bracket provides a tractor-mounted bracket for hanging two weights:

BG20627 replaces BG20022 and BG20499 rear weight brackets.
Clearance is provided for the carbon canister that is required on tractors sold in California.
BG20627 can be used in all applications where BG20022 and BG20499 were used.

Wheel weight mounting hardware for attaching one front wheel weight - 3080GXBM17978

30-lb (13.6-kg) front wheel weight

One 30-lb (13.6-kg) cast-iron weight may be installed on each front wheel for additional stability when operating on hillsides or with heavy rear equipment.

Requirements:

Mounting may require drilling two holes in the wheel rim.
BM17978 mounting hardware kit is required for each weight.