X570 LAWN TRACTOR 48 IN
Lawn Tractor with 48-in. Deck
- 24 hp (17.9 kW)* iTorque™ Power System
- 48-in. (122 cm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
- Twin Touch™ forward and reverse foot pedals
- 4 year/500 hour bumper-to-bumper warranty
Apply For Financing BUILD YOUR OWN
View Product Brochure
Features
Smooth-running V-twin engine
The tractor is powered by a John Deere iTorque™ power system, a combination of engine features and an exclusive hood design providing superior lugging ability, even cooling, and durability. Key engine features include:
- 24 hp (17.9 kW)
- Large 726 cc displacement
- V-twin air-cooled design
- Excellent power and performance
- Smooth, quiet power
- Easy starts
- Quality features include:
- Cast-iron cylinder liners
- Overhead valves
- Full-pressure lubrication
- Replaceable oil filter
- Dual-stage air cleaner
- Solenoid-shift starter for easy starts, even in cold weather
Flywheel alternator
A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:
- 15-amp capacity
- Regulated to keep the battery at a full charge, without risk of overcharging
Fuel tank has a large, 4.4-U.S. gal. (16.6-L) capacity
Fuel tankQuality fuel system components enhance performance and convenience:
- Large, 4.4-U.S. gal. (16.6-L) capacity
- Wide, 3-in. (7.6-cm) diameter fuel tank filler opening
- Located on the left fender
- Makes adding fuel easy and helps eliminate spillage
- Sealed and tethered fuel cap
- Reduced fuel vapor loss
- Less chance of losing fuel cap
Convenient dash-mounted fuel gauge- Automotive-style fuel gauge on the dash
- Easy to read from tractor seat
- Reduces likelihood of running out of fuel
- Eliminates unnecessary stops to refill
X394 with Accel Deep 48A Mower
Accel Deep 48A MowerThe 48-in. (122-cm) Accel Deep Deck uses the latest in three-spindle mowing technology to raise performance to a higher level:
- 10-gauge, 0.135-in. (3.4-mm) deck stamping for long life
- Deep, flat-top deck design to handle a large volume of material at faster mowing speeds
- Gives excellent cut quality and uniform discharge
- Easy to keep clean on top of and under the deck
- Resilient four-point mounting system suspends mower from tractor for a smooth and level cut
- Wide mower wheels easily adjusted just above ground level to help prevent scalping
- 0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height
- Onboard deck-leveling system makes keeping mower properly adjusted easy
- Compatible with optional MulchControl™ mulching system
- Compatible with high-performance Power Flow™ material collection systems
- For use on X330, X350, X354, X370, X380, X384, X390, X394, X570, X580, X584, and model year 2016 X590 Tractors
The 48-in. (122-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds:
- 4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
- Optional lever-action or electric one-touch MulchControl attachment provides superior mulching performance and versatility.
- Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
- Mower deck is suspended from the vehicle for a smooth and level cut
- Adjustable mower wheels, positioned just above ground level, help reduce scalping
Excellent cut quality
48A Mower top (similar mower from X700 Series Tractor shown)
48A Mower underside (similar mower from X700 Series Tractor shown)Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:
- Reducing the amount of re-cutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
- Helps maintain excellent cut quality at faster mowing speeds
- Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
- Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal re-cutting, and an even distribution of clippings.
Productivity - getting the job done fast
Right side of Accel Deep 48A Mower DeckDeep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of re-cutting so more power is available to process incoming grass:
- Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds
Large discharge opening is both high and wide to handle more material:
- Gives a smooth, even discharge of clippings at all mowing speeds
- Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
- The 48A Power Flow blower has an inlet housing with over 50 percent greater area than the 48X Power Flow blower used on previous machines.
Cleanliness - for the mower and the operator
Accel Deep 48A Mower Deck
Accel Deep 48A Mower DeckThe flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:
- There are few places to catch and hold material on top and underneath the deck.
- Top of deck stays cleaner, reducing time and effort needed for cleaning and service
- Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
- Less need to clean and remove buildup of material from underside deck
- The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck:
- Limited amount of material to drift onto the operator and mower deck
- Even for material discharged out the chute, less re-cutting results in larger pieces that are less likely to end up on the operator
- Mulching prevents the discharge of material completely and the MulchControl attachment makes mulching a practical solution for most mowing situations.
Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:
- The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
Mower wash port
Mower wash port with hose connectorA wash port is provided to make cleaning the underside of the mower deck easy.
- Hose connector is included with the mower deck.
Superior durability is designed in
Spindle pocket with flip-up cover
Easy-to-adjust mower wheel and mower side reinforcementThe 48A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:
- Ribs in the deck shell add strength where it is needed.
- The 48A has a 23 percent heavier overall weight than the Edge™ Xtra 48-in. (122-cm) mower deck used on previous machines.
Mower wheels are heavy duty:
- Provides greater strength and durability for longer, trouble-free life.
- Setting wheels to the correct height for the cutting height quick and easy.
Low-tension belt-drive design reduces the side load on engine lower bearings and mower deck bearings for longer life.
The 48A Mower Deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.
Dual-stage E-coat and powder-paint coatings provide extra protection from rust.
Versatility - easy to change between side discharge, mulch, and bagging modes
The 48A Mower is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:
- With an optional MulchControl attachment installed (along with the special mulching blades), changing from side-discharging to mulching or vice versa is done with the simple flip of a lever or push of an electric switch.
- The Power Flow rear bagger can be used with the MulchControl attachment and blades installed by simply using the MulchControl lever or electric one-touch switch to move the mulch baffle to the side-discharge position.
MulchControl option
A lever-action or electric one-touch MulchControl attachment for the 48A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:
- A beautiful looking lawn
- Grass clippings not blown onto the operator, driveways, or flower beds
- Less fertilizer use
- Elimination of the effort needed to dispose of clippings
How MulchControl works
MulchControl baffle open
MulchControl baffle closedMulchControl is an innovative, simple design that is easy to use and maintain:
- The MulchControl attachment includes baffles to control the flow of material under the deck.
- The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulching and side-discharge modes.
- When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
- When the MulchControl baffle is closed, the material stays within the deck and gets chopped into mulch and deposited in the turf.
MulchControl handle
Electric one-touch MulchControl switch- For the lever-action MulchControl attachment, a handle on top of the mower deck is used to engage or disengage mulch mode.
- The operator is required to get off of the tractor in order to engage or disengage mulch mode with the lever-action system.
- For the electric one-touch MulchControl attachment, a switch on the tractor dash is used to engage or disengage mulch mode.
- Changing from mulch mode to side discharge mode or vice versa takes only a few seconds.
MulchControl is well-suited to the following mowing situations:
- Usually mulch, but side discharge when grass gets too long
- Usually side-discharge, but would like to be able to close the chute to control clippings
- Always mulch a main lawn, but often side discharge secondary lawns
- Bag clippings, but want to go farther before emptying bags
MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging or bagging when needed.
While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
- When cutting strong southern grasses, such as Zoysia and Bermuda
- When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
- When optimum bagging and lawn clean-up is desired
7-bu (247-L) Power Flow rear bagger
Optional rear bagger
Power Flow blowerAn optional 7-bu (247-L) rear bagger material collection system (MCS) is available. It provides an efficient means of collecting grass clippings and leaves:
- The Power Flow blower and chute are easy to install. The Power Flow blower swings out for easy cleanout and cleanup.
- The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:
- 7-bu (247-L) capacity
- Easy-to-attach Power Flow blower (ordered separately)
- Easy-to-attach chute (ordered separately)
- Air exhaust duct
- Convenient spring-latch
- Airflow fill indicator
- Quik-Tatch mounting
- Sealed hopper top
- Loose-knit bags available
Larger 14-bu (493-L) and 19-bu (670-L) MCS are available, in addition to the 7-bu (247-L) MCS, for specific X300 and X500 Series Tractor models.
An exclusive 4-year or 500-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere X500 Series Tractors.
- The warranty is hassle free, with one company handling all of the paperwork.
- Premium features of X500 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.
*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.
Hydrostatic transaxle
Piston-type rotating groupsThe integrated hydrostatic transaxle (IHT) encloses the hydrostatic pump and motor rotating groups in the same housing with the differential and axle housing:
- Very efficient piston-type design
- Fewer sealing surfaces to minimize potential for leakage
When combined with the foot controls, the hydrostatic transmission functions similarly to that of an automatic transmission in an automobile, so the term automatic is often used to describe it.
Key features of the drive system are as follows:
- Large pump and motor rotating groups for long life and efficient operation
- Full-length axle housings to support heavy loads
- Twin Touch™ foot control for easy and precise change of speed and direction
- Internal wet-disk brakes for long life and consistent operation. Brake interlock system that returns the foot control pedals to neutral during panic stops.
- Return mechanism that closes the freewheeling valve when the brake pedal is depressed to start the engine
- Replaceable oil filter for extra protection for tractors equipped with hydraulic lift and steering
Replaceable filter (X580, X584, X590)Standard cruise control
Cruise controlCruise control is standard equipment:
- Maintains a set tractor ground speed for mowing large areas or when driving the tractor from one location to another.
- Convenient, easy-to-use button to activate cruise control function.
- Release cruise control with brake pedal or forward Twin Touch™ foot pedal
Traction assist (differential lock)
Traction assist controlTraction assist is standard equipment:
- Traction assist supplies positive power to both drive wheels for increased traction.
- Foot-operated traction assist control is convenient for the operator to use, when needed.
Lever-action MulchContol leverElectric one-touch MulchControl switchLever-action or electric one-touch MulchControl attachment is available for Accel Deep™ 42-in. (107-cm) (42A), 48-in. (122-cm) (48A), and 54-in. (137-cm) (54A) Mower Decks used on X300 and X500 Select Series™ Tractors.
MulchControl advantages and benefits
MulchControl enhances versatility and productivity. A mower deck equipped with MulchControl not only does an excellent job of mowing and mulching, but it can also be quickly converted from side discharging to mulching or vice versa:
- In mulch mode, it controls clippings dispersion in unwanted areas (driveways, landscape beds, near buildings, windows, parking lots, etc.).
- Reduces cleanup time needed to dispose of clippings.
- Reduces the amount of material entering a material collection system because, even in the side discharge mode, MulchControl will mulch about one third of the material due to the additional baffles under the mower deck and the unique design of the mulching blades.
Electric MulchControl has the additional advantage of being controlled from the tractor seat by a switch on the dash to operate an electric actuator that moves the baffle to close off the discharge area of the mower deck.
Electric one-touch MulchControl switch
Electric one-touch MulchControl actuator- Operators can convert between modes without interrupting the mowing process, making it practical to change between modes as conditions require.
- When approaching clean areas like driveways or flowerbeds where clippings would be undesirable
- When a breeze might blow clippings back onto the operator
- For side discharge mowing only the areas of the property where grass is too thick for mulching
- With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching
- With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.
- Models equipped with a 42A Mower Deck require a MulchControl baffle be removed to install the bagger chute; see 42A Mower Deck versatility explanation for more information.
- Changing from one mode to the other takes only a few seconds.
How MulchControl works
A mower equipped with a MulchControl attachment delivers unprecedented levels of productivity and versatility. The operator has the ability to quickly change between side discharging and mulching. A heavy-duty baffle opens and closes to convert the mower from side discharge mode to mulch mode or vice versa.
MulchControl baffle open (similar mower deck shown)MulchControl baffle closed (similar mower deck shown) MulchControl is an innovative, simple design that is easy to use and maintain:
- The MulchControl attachment includes baffles to control the flow of material under the deck.
- When the MulchControl baffle is open, most of the material flows freely out the discharge deflector or into a material collection system.
- When the MulchControl baffle is closed, material stays within the deck and gets chopped into mulch and deposited in the turf.
MulchControl is well-suited to the following mowing situations:
- For operators who usually mulch, but side discharge when grass gets too long
- For operators who usually side discharge, but would like to be able to close the chute to control clippings in some areas
- For operators who always mulch a main lawn, but often side discharge secondary lawns
- For operators who collect clippings, but want to go farther before emptying the material collection system
MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging when desired.
Advantages of MulchControl include:
- Performance is improved.
- Mulching is beneficial because it returns the clippings to the ground as fertilizer, which promotes lawn growth.
- Clippings are much smaller, which allows them to fall into the grass and be removed from view.
- Unsightly grass clippings are not blown onto driveways or into flower beds.
- Fertilizer use is reduced and provides associated environmental benefits.
- Uptime is increased.
- Operators can convert quickly between modes, making it possible to change between mulching and side discharging as conditions require.
- Mulching heavy, thick material can significantly reduce mower productivity. The ability to switch from mulch to side discharge mode ensures productivity, especially in grass too tall or thick to mulch effectively.
- Cost of operation is reduced.
- Controlling clipping dispersion reduces cleanup time.
MulchControl limitations
While in the side discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
- When cutting strong southern grasses, such as Zoysia and Bermuda
- When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
- When optimum bagging and lawn cleanup is desired
- 42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute
MulchControl compatibility
Each MulchControl attachment includes everything needed: baffles and mulch blades for all attachments, and the actuator, wiring, and switches for the electric one-touch attachments.
Lever-action MulchControl attachments
| Attachment number | Description | Applications |
| BM24794 | 42A MulchControl (lever action) | X300 Series Tractors, Z300 Series ZTrak™ Mowers |
| BM24993 | 48A MulchControl (lever action) | X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers |
| BM24994 | 54A MulchControl (lever action) | X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers |
Electric one-touch MulchControl attachments
| Attachment number | Description | Applications |
| BUC10164 | 42A electric one-touch MulchControl | X300 Series Tractors* |
| BUC10165 | 48A electric one-touch MulchControl | X300 and X500 Series Tractors* |
| BUC10166 | 54A electric one-touch MulchControl | X300 and X500 Series Tractors* |
* NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.
X590 Tractor shown with optional front blade and weather enclosure
X590 Tractor shown with optional snow blower and weather enclosureAn advantage of lawn tractors is their ability to use attachments for snow removal and other yard-care chores. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.
Equipment available for snow removal includes:
- 44-in. (112-cm) Snow Blower for X570 Tractor
- 47-in. (119-cm) Snow Blower for X580, X584, and X590 Tractors
- 48-in. (122-cm) Front Blade
- Tire chains or TerraGrip traction belts
- Weather enclosure
- Weights
30-in. (76-cm) Mechanical Rotary Tiller
42-in. (107-cm) Hydraulic Rotary TillerRotary tillers are real time savers for preparing seedbeds, controlling weeds, and other tillage jobs.
Equipment available for tilling includes:
- 30-in. (76-cm) Mechanical Rotary Tiller for X570, X580, and X590 Tractors
- 42-in. (107-cm) Hydraulic Rotary Tiller for X580 and X590 Tractors
- The hydraulic tiller is quieter operating and has the unique ability to operate with either forward or reverse tine rotation.
- Weights
X570 Tractor
Tractor front wheelA heavy-duty sector and pinion steering system with quality bearings provides easy and precise control for the life of the tractor:
- Tight, 22-in. (56-cm) turning radius provides excellent maneuverability.
- Tight turning ability improves mowing efficiency.
Easy steering
Easy steering is important to give the operator an enjoyable mowing experience:
- Larger, 14-in. (35.6-cm) diameter steering wheel improves leverage for easier turns.
- Larger sector gear improves (increases) the steering ratio.
- Higher steering ratio equals lower steering effort
- Dual drag links help equalize steering loads and greatly reduce steering error.
- Ball joints are provided on both ends of the steering tie rods.
- Long steering arms improve the mechanical advantage of the steering system though the full range of motion.
- Steering wheel/pinion gear shaft turns on a sealed ball bearing at the pinion gear.
- Gives easy steering
- Long steering system life
- Sector gear pivots on a shaft rather than a bushing to ensure proper gear mesh and eliminate binding.
- Upper and lower ends of the sector-gear shaft pivot on sealed ball bearings.
- Reduce steering effort
- Provide a smooth feel for the life of the tractor
- Greaseable front steering spindles pivot on heat-treated bushings.
- Reduce friction for easier steering
- Improve wear over time
Controls and gauges (steering wheel removed)
Dash (X590 Tractor shown with switch on to show display)Controls
The contoured dash has clean, attractive styling and ergonomic controls for easy use:
- Controls are color-coded for easy identification by the operator.
- Controls are logically placed and easy to reach.
- The power take-off (PTO) switch allows the operator to get fingers underneath it, like a T-handle, to pull up for easy activation.
- The reverse implement option (RIO) switch is a yellow button.
- The latch control on foot-lift models and hydraulic-lift control on power-lift models and the park brake latch are pivot levers for low effort.
- Cruise control activation is handled by an automotive-style button.
- Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.
- The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.
- Functional design of the throttle and choke controls provides good appearance and a comfortable feel.
Display panel
Display panel
Display panel illustration with descriptionsInstrument display has the look and feel of a modern automobile. A power-up sequence cycles lights and gauges to indicate they are working:
- Display features dark-cockpit design to minimize operator distractions.
- Display is back lit for night visibility.
- Night visibility is especially useful with snow blower use.
- Hour meter makes it easy to tell when oil changes and other maintenance should be performed.
- Electronic fuel gauge provides real-time fuel level information.
- A tachometer graphically displays engine speed.
- Target-zone graphics inform the operator of the engine speed range to use for best cut quality.
- An indicator tells the operator when the PTO is operating.
- Bright caution and stop lights capture the operator's attention when important information is on the instrument cluster.
- Damage can be prevented and repair costs reduced by addressing problems early.
- Operators are advised of what the problem is if they attempt to operate the mower with unsatisfied PTO, seat, or park brake interlocks.
- The indicators are also useful to identify the reasons the PTO or engine may have shut off when an interlock is unsatisfied.
- Operators are advised if battery voltage is low, normal, or excessive.
- The service indicator light illuminates to indicate a diagnostic error code is stored.
- On-board diagnostics provides trouble codes for use by trained technicians.
- For example, a technician will be able to test switch functionality and circuit continuity without tools.
- On-board diagnostics provides trouble codes for use by trained technicians.
Twin Touch™ foot control
Twin Touch foot control
Cruise controlTwin Touch foot pedals control the speed and direction of travel:
- Automotive-type accelerator control ensures easy operation.
- Operator can change direction without lifting foot off the platform.
- Large pedal surface gives superior operator comfort.
Cruise control
Cruise control is standard equipment:
- To engage, push the cruise-control button and hold until the foot is removed from the forward pedal.
- For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.
Lift-spring decals and bolt
Lift-assist spring decalA lift-assist spring is provided on the tractor to minimize lift effort:
- Lift effort can be easily adjusted by just turning a bolt located on the tractor front bumper for optimum performance, depending on the equipment used (mower, front blade, etc.).
- Decals on the outside of the tractor frame indicate appropriate adjustment.
- The mower will not be inadvertently locked in the raised position when mowing through ditches.
- When installing or removing a mower or front equipment raised by the foot-lift system, spring tension may be removed from the connection points.
- Pull rearward on the lift pedal and raise the lift latch to hold the pedal in the rearward position.
Mower deck height adjustment
Conveniently located mower deck height adjustment
Onboard mower adjusting gauge and wrenchA rotary dial knob makes adjusting the mower cut height quick and easy:
- Mower cut height can be adjusted in 0.25-in. (6.4-mm) increments from 1 in. (2.5 cm) to 4 in. (10.2 cm).
- Mower deck returns to the same preset height each time it is lowered.
- Onboard deck-leveling gauge and Exact Adjust tool conveniently located in the storage compartment under the seat
- Used in conjunction with Exact Adjust ports for easy and accurate leveling of the mower deck for optimum mowing performance
Deck-leveling gauge placed under deck
Exact Adjust tool is used to level mower deckStorage for the onboard deck-leveling gauge and the Exact Adjust tool is provided in the storage tray under the tractor’s seat:
- Exact Adjust ports allow for easy and accurate leveling of the mower deck for optimum mowing performance.
Deck-leveling gauge is placed at the appropriate location under the left rear, right rear, and front of the mower deck as the cut height is adjusted using the Exact Adjust tool and front draft arm adjusting nuts.
Foot pedal lift system (X570)
Foot pedal lift system (X570)
Foot-lift latch controlPushing with the foot to raise the mower or implement is less strenuous for many operators:
- Easy-to-use raised-position lock operates similarly to the park brake lock.
- Foot pedal is out of the way and not likely to catch on bushes and tree limbs when mowing.
- Mower deck returns to the same preset height each time it is lowered.
Convenient hydraulic lift (X580, X584, X590)
Hydraulic lift lever (X580, X584, X590)Convenient hydraulic lift lever makes raising and lowering the mower or implement easy:
- The hydraulic lift control lever is positioned on the dash near the steering wheel.
- Hydraulic lift provides quick, easy, and precise fingertip control of equipment.
- Implement float is built into the lift linkage.
Parking brake control
Parking brakeDepressing the brake pedal applies force to internal wet-disk brake (which provides excellent durability and long life) for safe stopping.
Parking brake control is conveniently located for easy access; holds brake pedal securely in locked position.
Electric power take-off (PTO) clutch is easy and convenient to use
Electric PTO switchThe heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.
Heavy-duty PTO clutch
PTO clutchThe PTO clutch is designed to operate through many on/off cycles.
RIO
Reverse implement switchUsing RIO
CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:
- Carefully check the area around the machine.
- Disengage the mower before backing up.
NOTE: Operating the mower while backing up is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.
- Stop forward travel. Allow attachment to run.
- Look down and behind the machine to be sure that there are no bystanders.
- Push and hold in the reverse implement switch while depressing the reverse pedal slightly.
NOTE: If the attachment stops while positioning the machine, return mower engagement (PTO) switch to off position. Repeat this procedure from the beginning. - Release the reverse implement switch and reposition the machine as the machine begins to move rearward.
- Resume forward travel. The attachment should continue operating.
- Repeat procedure to position the machine again.
Heavy-duty welded frame
Rear weight bracket/hitchThe frame is made of heavy-duty formed steel, reinforced in critical areas and welded for even greater strength:
- Frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material.
- Rear hitch plate is formed from 0.25-in. (6.4-mm) steel and completes the frame assembly.
- Rear hitch plate can support up to four 42-lb (19-kg) Quik-Tatch weights.
- Optional front bumper for the X570 Tractor can support up to four 42-lb (19-kg) Quik-Tatch weights.
Front axle and wheel spindles are heavy duty
Cast-iron front axleThe front axle is made of nodular cast iron:
- Strong and shock resistant
- Will not yield under heavy loads or impact
Replaceable bushings are used at the center axle pivot and steering spindles:
- Provide excellent wear resistance
- Grease cavity between bushings maintains lubrication and easy steering between greasings
- Easy-to-service grease fittings at each spindle
Front steering spindles
Steering spindle (X570 shown)The front steering spindles are strong for long life:
- Have the strength to handle heavy implements
- 0.75-in. (19-mm) steering spindle diameter (X570)
- 1-in. (25.4-mm) steering spindle diameter (X580, X584, X590)
- Provide long life at bearing surfaces
- 0.75-in. (19-mm) diameter front wheel bearings (X570)
- 1-in. (25.4-mm) diameter front wheel bearings (X580, X584, X590)
- Sealed precision ball bearings at front wheels ensure long life and are maintenance free
Rear equipment-mounting system is heavy-duty and easy to use
Rear equipment mounting systemA heavy-duty equipment mounting system is used:
- Includes strong frame mounts with a combination of mounting holes in the tractor hitch plate that accept pins or shoulder bolts to support heavy rear-mounted equipment.
- Easily attach optional equipment to the tractor
- Can bear the load of heavy rear-mounted equipment, such as material collection systems
Attractive styling
Side-hood ventsSmooth, rounded contours present a modern, styled appearance:
- Hood styling incorporates efficient full-length air-intake louvers on each side.
- Cooler engine operation
- Lower operator station sound levels
- Hot air is vented out the front grill, away from the operator.
- The fully enclosed hood is made of molded-in-color material.
- Reduces sound
- Will not rust or dent
- Distinctive grille and large, one-piece fender deck complete the styling package.
Versatility and premium features for great performance with larger equipment
X590 show with 47-in. (119-cm) Snow Blower
X590 Tractor shownPremium features ensure the versatility of X500 Series Tractors:
- Heavy-duty welded-steel frame with integrated rear weight bracket
- Integrated front weight bracket (X580, X584, X590)
- Air-cooled John Deere iTorque™ power system
- Differential lock
- Convenient foot-pedal lift system (X570) or easy-to-use hydraulic lift (X580, X584, X590)
- Low-effort manual steering (X570) or power steering (X580, X584, X590)
- Five-position tilt steering wheel (X584, X590)
- Heavy-duty all-purpose (HDAP) rear tires (X580, X590)
- Accel Deep™ Mower Decks with optional MulchControl™ system
Two headlights give excellent visibility
Quality headlightsHeadlights are standard equipment.
High-quality headlights make evening work easier and safer:
- Two 27-W bulbs provide excellent lighting for improved visibility during evening operation.
- A headlight position on the ignition switch makes it easy to operate the headlights.
- Headlights are designed to provide an optimum lighting pattern for mowing and snow removal.
Dash controls are color coded for identificationAutomotive-like dash displayThe operator station is designed for operator comfort and convenience in operating all controls. The controls are easy to use and color coded for quick identification.
Comfortable seats
15-in. (38-cm) open-back seat (X570, X580)
21-in. (53-cm) high-back seat (X584, X590)The 15-in. (38-cm) open-back seat (X570, X580) features distinctive styling and is designed for comfort:
- Open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride.
- Hand grip at the top of the seat is conveniently located for use when tilting the seat up to protect it from the weather.
The 21-in. (53-cm) high-back seat (X584, X590) provides additional comfort and support for the operator.
Adjustable suspension
Seat shown with optional storage pocketThe seat suspension is easily adjusted to make most any operator comfortable:
- 7 in. (18 cm) of seat travel allows the operator to be seated comfortably and operate the controls easily.
- Seat can be easily adjusted fore and aft by the operator while sitting on the seat (15 positions).
- Seat features a suspension that is easily adjusted for the operator's weight and height.
- Springs provide a smooth ride and will not bottom out.
- Spring position is adjustable for the operator's weight.
- Seat tilts forward to keep the seating surface out of the weather.
- Tilting the seat forward keeps moisture and the sun off the seat cushion for greater operator comfort.
- Optional storage pocket (X570, X580) provides a convenient storage area for gloves, etc.
Optional 21-in. (53.3-cm) professional two-piece seat, four-bar suspension, and slide
Seat has convenient tilt-back feature
Tilt-back seat controlThe optional 21-in. (53.3-cm) professional two-piece seat, four-bar suspension, and slide shipped on Signature Series X700 Tractors is available as an upgrade seat and suspension for all X500 Multi-Terrain Tractors (model year 2006-). Key selling features for this seat include:
- Thick seat cushion for lasting comfort, even after a full day of use
- Back of seat can be angled to maximize operator comfort
- Convenient lever on the side of the seat unlocks back of seat to allow positioning
- Four-bar suspension and slide are included for extra comfort and bolt to the tractors fender-deck mounting holes
- BM24426 armrest attachment available as a field-installed option
Optional armrest attachment
Adjustable armrest option
Left armrest in raised positionArmrests increase operator support and comfort, thus reducing fatigue and improving productivity, especially when mowing for extended periods of time. Armrests are adjustable to suit the operator. This armrest attachment is designed for the optional 21-in. (53.3-cm) professional two-piece seat.
Standard 12-V outletA 12-V outlet is standard equipment and provides a convenient plug-in for electrical equipment.
Tilt steering wheel (X584, X590)
Tilt steering wheel (lowest position)
Tilt steering wheel (highest position)- Five steering-wheel positions allow the operator to select the most comfortable setting (X584, X590).
Rubber foot pads
Rubber foot padsRubber foot pads make the operator more comfortable:
- Help insulate operator's feet from vibration
- Attractive styling
- Long-lasting wear surface
- Reduce chance of slippage, even with wet surface
Cup holder, toolbox, and fender handleA cup holder and covered toolbox are conveniently located on the fender next to the operator's seat.
Handles on each fender are useful when getting on and off the tractor.
Illustration of fast connector locationA mid-vehicle 12-V fast connector, located under the tractor’s fuse box, is included as standard equipment to reduce initial installation time for some attachments that operate on 12-V power from the tractor:
- The four-cavity connector includes battery, ground, and key switch terminals and is turned on and off with the ignition switch.
One-piece hood is easy to open
Service interval decal located under hoodThe one-piece hood opens easily to permit checking and servicing the engine:
- Important service points are located within easy reach.
- A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.
- The high-quality engine used in the X500 Series does not require an 8-hour oil and filter change because improvements in manufacturing processes and quality of parts, components, and oils have eliminated the need for the short interval oil change requirement.
Easy-to-service engine fuel and oil filtersThe engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.
Exact Adjust ports and onboard deck-leveling tools make precise deck adjustments easy
Deck-leveling gauge and hex adjusting tool stored under tractor seat
Exact Adjust access holesA mower deck must be level side-to-side and properly adjusted front-to-rear to give the best cutting performance. A removable onboard deck-leveling gauge and a hex-key tool are provided to make adjustment easy. They are securely stored under the tractor seat.
Exact Adjust leveling ports are provided on each side of the operator platform above the mower-level adjusting bolts. With the hex-shaped tool, they provide convenient access to allow quick and easy adjustment of the mower for the best-cut quality of cut.
The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:
- There is no need to reach under the fender deck while making the mower-level adjustment.
- Onboard deck-leveling gauge, Exact Adjust ports, and the hex tool work together.
- Level the mower deck side to side
- Set the correct amount of rake (front-to-back deck orientation)
- Calibrate the cutting height to the cut-height adjusting knob setting
- Exact Adjust simplifies leveling the mower deck if equipped with a Power Flow™ blower.
- To give the best cut, mower level should be adjusted if alternately mowing with and without blower installed. The Exact Adjust feature makes this easy.
Deck-leveling tool placed under deckUsing included ball-hex tool to level mower deckConsult the operator's manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:
- Park the tractor on a level surface.
- Inflate tires to the correct pressure.
- Consult the label for the cutting-height knob that is located on the console of the machine. This label shows deck-leveling position and location of deck-leveling adjustment points.
Cut height adjusting knob- Set mower cutting-height knob to the correct deck-leveling position.
- For X300 models, use position 2.75
- For all other models, use position 2.5
- Adjust mower wheels as necessary so they do not contact the ground surface.
- Remove the onboard deck-leveling gauge that is located under the seat.
- Using the Exact Adjust ports and tool, adjust mower deck side-to-side level so the deck-leveling gauge just slips under the left and right lower deck rim at the designated adjustment points. The location of adjustment points will vary slightly between decks.
- Left- and right-rear adjustment points are under the deck rim near the rear mower wheels, if equipped.
- Adjust mower deck front-to-back level, if necessary.
- Loosen rear nuts equally on each side of front lift rod.
- Turn front nut equally on each side clockwise to raise front of mower or counterclockwise to lower it until gauge just slips under the front adjustment point.
- Tighten rear nuts after adjustment is complete.
- Return the gauge to its storage position.
NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.
MowerPlus app screen
MowerPlus app maintenance screenKeep a John Deere riding lawn mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.
Look for the MowerPlus app on the mobile device’s app store.
The app supports residential lawn equipment such as 100 Series, S240, X300, X500, X700, Z200 through Z600, and many similarly-sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.
NOTE: Some product image variation may exist.
Also available is the John Deere MowerPlus smart connector (sold separately).
Smart connectorThe John Deere MowerPlus smart connector wirelessly links a Select Series™ X300 or X500 Tractor to the MowerPlus app on a mobile device. The smart connector transmits engine usage to the app, making it easy to track maintenance intervals. It also transmits the fuel level to the app—when thinking ahead about Saturday morning mowing, the operator can make sure the tractor is fueled and ready to go.
Specifications
| Key Specs | x570-lawn-tractor-48-in Current Model |
|---|---|
| Engine power | 24 hp 17.9 kW |
| Engine manufacturer/model | FS730V |
| Transaxle type | K72 hydrostatic integrated with transaxle |
| Transaxle control | Twin Touch™ pedals |
| Rear tires | 24x12-12 turf |
| Steering type | Manual, sector and pinion |
| Lift system type | Foot pedal with adjustable spring assist |
| Cutting width | Accel Deep™ mower deck, 48 in. 122 cm |
| U.S. warranty | 4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
| Engine | |
| Power | 24 hp 17.9 kW |
| Displacement | 44.3 cu in. 726 cc |
| Manufacturer/model | FS730V |
| Type | Overhead valve, full-pressure lube, oil filter |
| Cylinders | V-twin, cast-iron liners |
| Governor | Mechanical |
| Choke/speed control | Separate levers, automatic choke return |
| Cooling method | Air |
| Air cleaner | Dry, replaceable with foam precleaner |
| Oil drain | No tools |
| Fuel system | |
| Type | Gasoline |
| Fuel delivery | Pulse pump and carburetor |
| Fuel gauge | Gauge on dash |
| Fuel tank location | Rear |
| Fuel fill opening | On left fender, 3 in. 7.6 cm |
| Fuel tank capacity | 4.4 U.S. gal. 16.7 L |
| Electrical system | |
| Battery | 12 V 500 CCA |
| Charging system | Flywheel alternator, regulated, 15 amp |
| Engine starter | |
| Hourmeter | Yes |
| Headlights | Two standard, incandescent, 27 W |
| Taillights or reflector | Reflectors |
| Backup lights | No |
| Rear work lights | No |
| 12-V outlet | Yes |
| Transaxle | |
| Type | K72 hydrostatic integrated with transaxle |
| Control | Twin Touch™ pedals |
| Cruise control | Yes, button on dash |
| Oil cooler | Fins and fan on transaxle |
| Oil filter | Yes |
| Differential lock | Standard |
| Forward speed | 0-7.2 mph 0-11.6 km/h |
| Reverse speed | 0-5.2 mph 0-8.4 km/h |
| Brakes | Internal wet disc |
| Chassis | |
| Frame | Welded heavy-duty |
| Primer/paint | E-coat/powder |
| Weight bracket | Standard rear, optional front - each holds up to four Quik-Tatch weights, 42 lb 19 kg |
| Receiver hitch | No |
| Front axle | Cast iron front axle, front wheel ball bearings |
| Spindle bushings | Metal, replaceable |
| Front tires | 15x6.5-8 |
| Rear tires | 24x12-12 turf |
| Hood material | Molded-in color hood material reduces sound, will not rust or dent |
| Fender deck material | Stamped steel |
| Floor mats | Sure-grip rubber |
| Storage | Yes, under seat and covered toolbox |
| Service interval decal | Yes |
| Fender handles/grips | Handles |
| Cup holder | Yes |
| Equipment mounting | Yes, heavy duty |
| Steering | |
| Type | Manual, sector and pinion |
| Four-wheel steer | Not available on this model |
| Steering wheel | 14 in. 35.6 cm |
| Tilt steering wheel | No |
| Turning radius | 16 in. 40.6 cm |
| Uncut circle radius | 23 in. 58 cm |
| Seat | |
| Type | Open-back design with grasp |
| Seat back height | 15 in. 38.1 cm |
| Armrests | No |
| Fore-aft adjustment | While seated, slide rail, 14-position, 7 in. 17.8 cm |
| Seat suspension | Tilt, two coil springs, three-position no-tools adjustment for operator weight |
| Lift system | |
| Type | Foot pedal with adjustable spring assist |
| Hydraulic outlets | No |
| Mower cut height | 13 positions, 1-4 in. 2.5-10.2 cm |
| Cut height increments | 0.25 in. 0.64 cm |
| Preset cut height | Yes |
| Mower deck | |
| Type | Side discharge |
| Cutting width | Accel Deep™ mower deck, 48 in. 122 cm |
| Construction | Stamped steel deck shell |
| Mower deck material | 10 gauge 0.135 in. 3.4 mm |
| Mower wash port | Yes |
| Mower drive system | Electric power take-off (PTO) clutch, in-line belt |
| Mower wheels | Four |
| Mower wheel adjustment | Seven-position, spring-loaded pin |
| Mower level adjustment | Exact Adjust ports and onboard deck-leveling gauge |
| Mower attachability | |
| Type | Roll under tractor |
| Front draft arms | Attached with spring pins at two points |
| Rear draft arms | Quick-pull pins |
| Mower wheels rotate | Yes, 90 degrees for easy mower removal |
| Drive system | Dual belts |
| Safety | |
| Meets ANSI standard | Yes |
| Meets OPEI standard | Yes |
| Backup protection | Reverse Implement Option (RIO) |
| Safety video | Yes |
| Buyer's notes | |
| Notes | Heavy-duty garden tractor transaxle Steering spindle bushings for long life Built-in rear weight bracket |
| Warranty | 4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
| Optional equipment | |
| Mowers | 48A (standard) |
| Rear bagger | 7, 14, 19 bu 247, 493, 670 L |
| Powered material collection | Power Flow™ blower |
| Mulching system | Yes, MulchControl™ |
| Front thatcher | 38, 46, 54 in. 96.5, 116.8, 137.2 cm |
| Front blade | 48 in. 121.9 cm |
| Mid-mount blade | |
| Snow blower | Two-stage, 44 in. 111.8 cm |
| Rotary broom | |
| Rotary tiller | Mechanical, 30 in. 76.2 cm |
| Sleeve hitch | Yes, implements include box scraper, rear blade, plow, disk, and cultivator |
| 3-point hitch | |
| Rear power take-off (PTO) | |
| Plow, moldboard | Yes |
| Box scraper | Yes |
| Cultivator | Yes |
| Rear blade | Yes |
| Disk harrow | |
| Landscape rake | |
| Sprayer | Tow-behind, 15, 25, 45 U.S. gal. 56.8, 94.6, 170.3 L Mounted, 25 U.S. gal. 94.6 L |
| Spreader | 125, 175 lb 57.7, 79.4 kg Mounted, 125 lb 57.7 kg |
| Front bumper | Styled bumper option |
| Brush guard | Yes |
| Weather protection | Weather enclosure |
| Sun canopy | Yes |
| Rear receiver hitch | |
| Bucket holder | Yes, double bucket |
| Grass striping | Lawn striping kit |
| Tractor shovel | 40 in. 101.6 cm |
| Front loader | |
| Other equipment | |
| Tow-behind tools | 19 |
| Dimensions | |
| Height | 45 in. 114.3 cm |
| Overall length | 75 in. 190.5 cm |
| Wheelbase | 51.2 in. 130 cm |
| Width with mower | 62.5 in. 159 cm |
| Width with mower (deflector raised for storage) | 53.6 in. 136 cm |
| Width without mower | 41 in. 104.1 cm |
| Weight | Mower, no fuel, 748 lb 339 kg |
Accessories and Attachments
Carts
7P Poly Utility CartEvery owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.
Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak™ or ZTrak™ mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck.
7P Poly Utility Cart- The cart has a premium molded, high-density polyethylene box construction.
- Compression molding process allows polyethylene to be the optimum thickness in all areas for superior strength and durability.
- Polyethylene body will not rust or dent; it stays looking new longer.
- 0.75-in. (2-cm) x 2-in. (5-cm) stake pockets are molded in to make the addition of side extensions easy.
- Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
- Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
- Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
- Styling is compatible with other John Deere equipment.
- Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.
Wheels
7P Utility Cart wheelWheels are mounted on a solid, one-piece axle for durability.
Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.
The pneumatic tires offer the following:
- Good flotation
- Minimal rolling resistance
- Shock absorption
Sloped tailgate
Sloped tailgate for easy emptyingA sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
Tractor hitch
Spring-pin tractor hitchA large-diameter hitch pin provides plenty of strength:
- Fast, easy attachment to the tractor hitch
- Spring pin to ensure the pin stays in place
Tilt latch
Tilt latchAn easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.
Model comparison chart
Comparison with similar models
| Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
| 7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| Box capacity | ||||||||
| Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
| Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
| Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
| Box dimensions | ||||||||
| Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
| Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
| Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
| Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
| Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
| Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
| Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
| Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
| Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
| Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
| Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
| Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
| Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
| Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
| Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
| Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
| Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
| Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
| 7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
| S240 | X | X | X | X | X | X | X | |
| LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
| LX280, LX280AWS, LX289 | X | X | X | X | X | |||
| X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
| SST15, SST16, SST18 | X | X | X | |||||
| G110 | X | X | X | X | X | X | ||
| GT235, GT245 | X | X | X | X | X | X | ||
| GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
| X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
| X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
| X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
| Tractor | Additional weight |
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
| S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
| LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
| LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
| SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
| G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
| G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
| GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
| GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
7P Poly Utility Cart
Order number: LP21935
Oilite is a trademark of Beemer Precision, Incorporated.
8Y Convertible Poly Utility Cart, push mode
8Y Convertible Poly Utility Cart, tow-behind mode The 8-cu-ft (0.23-m3), 300-lb (136-kg) capacity 8Y Convertible Poly Utility Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.
Key features include:
- Compatible with riding lawn tractors and garden tractors
- Durable poly construction
- All-terrain pneumatic tires
- Converts from tow cart to push cart without tools
- Large handle is provided for ease of use
Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.
Model comparison chart
Comparison with similar models
| Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
| 7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| Box capacity | ||||||||
| Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
| Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
| Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
| Box dimensions | ||||||||
| Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
| Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
| Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
| Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
| Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
| Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
| Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
| Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
| Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
| Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
| Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
| Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
| Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
| Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
| Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
| Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
| Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
| Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
| 7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
| S240 | X | X | X | X | X | X | X | |
| LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
| LX280, LX280AWS, LX289 | X | X | X | X | X | |||
| X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
| SST15, SST16, SST18 | X | X | X | |||||
| G110 | X | X | X | X | X | X | ||
| GT235, GT245 | X | X | X | X | X | X | ||
| GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
| X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
| X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
| X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
| Tractor | Additional weight |
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
| S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
| LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
| LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
| SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
| G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
| G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
| GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
| GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
8Y Convertible Poly Utility Cart
Order number: LP22755
Oilite is a trademark of Beemer Precision, Incorporated.
10P Poly Utility CartEvery owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.
Utility carts can be used to haul a variety of materials:
- Firewood
- Lawn debris
- Sand
- Dirt
- Mulch
- Garden tools
- Plants and bushes
The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:
- Large 650-lb (295-kg) capacity
- 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
- Will not dent or rust
- 15x6 tubeless pneumatic tires with turf tread for maximum traction
- Easy, hands-free foot pedal dump release
- Steep dump angle for complete emptying
A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.
Model comparison chart
Comparison with similar models
| Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
| 7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| Box capacity | ||||||||
| Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
| Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
| Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
| Box dimensions | ||||||||
| Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
| Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
| Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
| Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
| Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
| Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
| Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
| Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
| Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
| Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
| Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
| Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
| Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
| Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
| Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
| Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
| Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
| Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
| 7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
| S240 | X | X | X | X | X | X | X | |
| LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
| LX280, LX280AWS, LX289 | X | X | X | X | X | |||
| X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
| SST15, SST16, SST18 | X | X | X | |||||
| G110 | X | X | X | X | X | X | ||
| GT235, GT245 | X | X | X | X | X | X | ||
| GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
| X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
| X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
| X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
| Tractor | Additional weight |
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
| S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
| LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
| LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
| SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
| G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
| G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
| GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
| GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
10P Poly Utility Cart
Order number: LPPCT10JD
Oilite is a trademark of Beemer Precision, Incorporated.
13 Steel Utility Cart Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.
Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.
Welded boxWelded box construction provides maximum reliability:
- Requires less setup time than the bolted construction.
- Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.
Wheels and tires
Wheels are mounted on a solid, one-piece axle for durability.
Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.
Pneumatic tires offer:
- Good flotation
- Minimal rolling resistance
- Shock absorption
Turf-tread tires are used on the 13 Utility Cart.
Deluxe tailgateDeluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.
Easy hookup and tilt-dump latch
Spring-pin tractor hitch
Tilt-dump latchA large-diameter hitch pin provides plenty of strength:
- Fast, easy attachment to the tractor hitch
- Spring pin to ensure the pin stays in place
The easy-to-use latch allows tilting the bed for easier unloading:
- Steep dump angle makes emptying easier.
Model comparison chart
Comparison with similar models
| Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
| 7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| Box capacity | ||||||||
| Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
| Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
| Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
| Box dimensions | ||||||||
| Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
| Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
| Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
| Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
| Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
| Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
| Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
| Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
| Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
| Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
| Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
| Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
| Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
| Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
| Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
| Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
| Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
| Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
| 7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
| S240 | X | X | X | X | X | X | X | |
| LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
| LX280, LX280AWS, LX289 | X | X | X | X | X | |||
| X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
| SST15, SST16, SST18 | X | X | X | |||||
| G110 | X | X | X | X | X | X | ||
| GT235, GT245 | X | X | X | X | X | X | ||
| GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
| X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
| X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
| X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
| Tractor | Additional weight |
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
| S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
| LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
| LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
| SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
| G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
| G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
| GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
| GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
13 Utility Cart
Order number: LPHDC13JD
Oilite is a trademark of Beemer Precision, Incorporated.
16YS Swivel CartThe 17-cu-ft (0.48-m³), 800-lb (363-kg) capacity or 350 lb (158 kg) when using swivel feature to dump 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.
Key features include:
- Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants
- 800-lb (363-kg) capacity makes it durable enough for the heavy jobs
- 350 lb (158 kg) when using swivel feature to dump
- Convenient foot pedal release for easy dumping
- Molded stake pockets for enlarging the bed size
NOTE: Do not exceed 350 lb (158 kg) weight capacity when using swivel feature to dump.
Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.
Model comparison chart
Comparison with similar models
| Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
| 7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| Box capacity | ||||||||
| Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
| Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
| Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
| Box dimensions | ||||||||
| Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
| Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
| Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
| Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
| Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
| Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
| Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
| Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
| Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
| Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
| Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
| Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
| Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
| Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
| Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
| Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
| Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
| Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
| 7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
| S240 | X | X | X | X | X | X | X | |
| LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
| LX280, LX280AWS, LX289 | X | X | X | X | X | |||
| X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
| SST15, SST16, SST18 | X | X | X | |||||
| G110 | X | X | X | X | X | X | ||
| GT235, GT245 | X | X | X | X | X | X | ||
| GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
| X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
| X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
| X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
| Tractor | Additional weight |
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
| S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
| LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
| LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
| SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
| G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
| G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
| GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
| GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
16YS Swivel Cart
Order number: LP68186
Oilite is a trademark of Beemer Precision Incorporated.
17P Utility CartEvery owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.
Utility carts can be used to haul a variety of materials:
- Firewood
- Lawn debris
- Sand
- Dirt
- Mulch
- Garden tools
- Plants and bushes
Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
Key features of the 17P Utility Cart:
- 1,000-lb (454-kg), 17-cu ft (0.48-m3) load capacity.
- Cart has premium molded polypropylene box construction.
- Polypropylene body will not rust or dent, staying new-looking longer.
- 0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.
- Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.
- Ribs in box bottom add strength and prevent a shovel from hitting bolts when emptying the cart.
- Sloped tailgate design makes emptying the box easier; no tailgate to loosen or remove.
- Styling is compatible with other John Deere equipment.
- 16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.
- Wheels are mounted on a solid one-piece axle.
- Wheels turn on iron/Oilite® bushings with grease fitting for long life.
- Spring-loaded dump latch is easy to use.
A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.
Model comparison chart
Comparison with similar models
| Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
| 7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| Box capacity | ||||||||
| Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
| Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
| Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
| Box dimensions | ||||||||
| Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
| Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
| Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
| Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
| Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
| Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
| Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
| Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
| Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
| Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
| Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
| Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
| Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
| Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
| Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
| Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
| Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
| Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
| 7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
| S240 | X | X | X | X | X | X | X | |
| LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
| LX280, LX280AWS, LX289 | X | X | X | X | X | |||
| X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
| SST15, SST16, SST18 | X | X | X | |||||
| G110 | X | X | X | X | X | X | ||
| GT235, GT245 | X | X | X | X | X | X | ||
| GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
| X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
| X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
| X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
| Tractor | Additional weight |
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
| S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
| LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
| LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
| SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
| G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
| G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
| GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
| GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
17P Utility Cart
Order number: LPPCT17JD
Oilite is a trademark of Beemer Precision Incorporated.
18 Utility Cart Everyone who owns a John Deere riding lawn and garden product is a potential user of a high-quality affordable utility cart.
Utility carts can be used to haul a variety of materials:
- Firewood
- Lawn debris
- Sand
- Dirt
- Mulch
- Garden tools
- Plants and bushes
Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
Durable box design
Bolt-together boxDurable 18-gauge, 0.05-in. (1.2-mm) (10S) or 16-gauge, 0.06-in. (1.5-mm) (16S) steel components are bolted together.
Recessed bolts are used in the bottom of the box, so they will not interfere with emptying the cart.
Convenient emptying of box
TailgateThe deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.
Model comparison chart
Comparison with similar models
| Model | Order through | Box capacity (heaped) | Material thickness | Maximum weight | Vehicle compatibility |
| 7P | Order Zone | 7 cu ft (0.20 m3) | High-density polyethylene (HDPE)** | 450 lb* (204 kg) | EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 8Y | Order Zone | 8 cu ft (0.22 m3) | HDPE** | 300 lb* (136 kg) (tow) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 10P | Order Zone | 10 cu ft (0.28 m3) | Polypropylene | 650 lb* (295 kg) | EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 13 | Order Zone | 13 cu ft (0.37 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 16YS | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 17P | Order Zone | 17 cu ft (0.48 m3) | Polypropylene | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 18 | Order Zone | 18 cu ft (0.51 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | 100 Series, S240, X300 Series, X500 Series, X700 Series |
| 21 | Order Zone | 21 cu ft (0.59 m3) | 16-gauge, 0.06-in. (1.5-mm) steel | 1,000 lb* (454 kg) | X700 Series |
*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Specifications
7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| Box capacity | ||||||||
| Heaped | 7 cu ft (0.20 m3) | 8 cu ft (0.22 m3) | 10 cu ft (0.28 m3) | 13 cu ft (0.37 m3) | 17 cu ft (0.48 m3) | 17 cu ft (0.48 m3) | 18 cu ft (0.51 m3) | 21 cu ft (0.59 m3) |
| Struck | 5.6 cu ft (0.16 m3) | 6.6 cu ft (0.19 m3) | 8.3 cu ft (0.24 m3) | 10 cu ft (0.28 m3) | 15 cu ft (0.42 m3) | 14 cu ft (0.40 m3) | 15 cu ft (0.42 m3) | 15 cu ft (0.42 m3) |
| Maximum weight | 450 lb* (204 kg) | 300 lb* (136 kg) | 650 lb* (295 kg) | 1,000 lb* (454 kg) | 800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) | 1,000 lb* (454 kg) |
| Box dimensions | ||||||||
| Width | 33 in. (84 cm) | 33.68 in. (85.5 cm) | 30.3 in. (77 cm) | 30.25 in. (76.8 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Length | 45 in. (114 cm) | 45 in. (114 cm) | 44.5 in. (113 cm) | 48 in. (122 cm) | 58.5 in. (148.6 cm) | 58.5 in. (148.6 cm) | 48 in. (122 cm) | 48 in. (122 cm) |
| Depth | 10.5 in. (27 cm) | 10.75 in. (27.3cm) | 12 in. (30.5 cm) | 12 in. (30.5 cm) | 15.5 in. (39.4 cm) | 15.5 in. (39.4 cm) | 18 in. (45.7 cm) | 11 in. (27.9 cm) |
| Box construction | Molded | Molded | Molded | Welded | Molded | Molded | Welded | Bolted |
| Material | High-density polyethylene (HDPE)** | HDPE** w/UV inhibitor | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | Polypropylene | Polypropylene | 16-gauge, 0.06-in. (1.5-mm) steel | 16-gauge, 0.06-in. (1.5-mm) steel |
| Tailgate | None, sloped | None, sloped | None, sloped | Hinged | None, sloped | None, sloped | Hinged | Lift-out/swing-out |
| Pneumatic tires | 2 ply | --- | 2 ply | 2 ply | 4 ply | 4 ply | 4 ply | 2 ply |
| Size | 13x4-6 | 13x4-6 | 15x6.00-6 | 15x6.00-6 | 16x6.50-8 | 16x6.50-8 | 16x6.50-8 | 20x10.00-8 |
| Tread design | Turf | Knobby | Turf | Turf | Turf | Turf | Turf | Turf |
| Recommended inflation pressure | 30 psi (207 kPa) | 30 psi (207 kPa) | 14 psi (97 kPa) | 14 psi (97 kPa) | 35 psi (241 kPa) | 28 psi (193 kPa) | 28 psi (193 kPa) | 10 psi (70 kPa) |
| Wheel bearings | Iron/Oilite | None | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Iron/Oilite | Ball bearings, double sealed |
| Grease fittings on wheels | Yes | None | Yes | Yes | Yes | Yes | Yes | None |
| Axle diameter | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 0.75 in. (1.905 cm) | 1 in. (2.54 cm) | 1 in. (2.54 cm) |
| Ground clearance | 5.62 in. (14.3 cm) | 5.25 in. (13.3 cm) | 6.5 in. (16.5 cm) | 6.5 in. (16.5 cm) | 14.25 in. (36.2 cm) | 14.25 in. (36.2 cm) | 7 in. (17.8 cm) | 8.25 in. (21 cm) |
| Width, overall | 34 in. (86.4 cm) | 33.68 in. (85.5 cm) | 38 in. (96.5 cm) | 38 in. (96.5 cm) | 39.5 in. (100.3 cm) | 39.5 in. (100.3 cm) | 38 in. (96.5 cm) | 48 in. (122 cm) |
| Hitch pin | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip | Pin/spring clip |
| Dump angles | 55 degrees | 55 degrees | 56 degrees | 31 degrees | 46 degrees | 46 degrees | 35/40 degrees | 35/40 degrees |
| Maximum tongue weight | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 70 lb (31.75 kg) | 100 lb (45.4 kg) | 50 lb (22 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) | 100 lb (45.4 kg) |
| Shipping weight with carton | 68 lb (31 kg) | 65 lb (29.5 kg) | 79 lb (35.8 kg) | 110 lb (49.9 kg) | --- | 105 lb (47.6 kg) | 170 lb (77.1 kg) | 240 lb (109 kg) |
| Net weight | 65 lb (29 kg) | 55 lb (25 kg) | 72 lb (32.7 kg) | 105 lb (47.6 kg) | 103 lb (47 kg) | 105 lb (47.6 kg) | 150 lb (68 kg) | 220 lb (99.8 kg) |
*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).
**HDPE is compression molded for optimum thickness in all areas and maximum durability.
Tractor compatibility and requirements
Utility Carts
Chart below shows vehicle compatibility.
An X indicates cart can be used with the pulling unit.
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.
| 7P | 8Y | 10P | 13 | 16YS | 17P | 18 | 21 | |
| EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R | X | X | ||||||
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | X | X | X | X | X | X | X | |
| S240 | X | X | X | X | X | X | X | |
| LT150, LT160, LT180, LT190, LTR180 | X | X | X | X | X | |||
| LX280, LX280AWS, LX289 | X | X | X | X | X | |||
| X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394 | X | X | X | X | X | X | X | |
| SST15, SST16, SST18 | X | X | X | |||||
| G110 | X | X | X | X | X | X | ||
| GT235, GT245 | X | X | X | X | X | X | ||
| GX255, GX335, GX345, GX355 | X | X | X | X | X | X | ||
| X500, X520, X530, X534, X540 X570, X580, X584, X590 | X | X | X | X | X | X | X | |
| X465, X475, X485, X495, X575, X585, X595 | X | X | X | X | X | X | X | X |
| X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758 | X | X | X | X | X | X | X | X |
For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:
| Tractor | Additional weight |
| L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180 | Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear |
| S240 | Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear |
| LT150, LT160, LT180, LT190, LTR180 | Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190) |
| LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394 | Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear |
| SST15, SST16, SST18 | One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear |
| G100 | Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear |
| G110 | Two 50-lb (23-kg) plastic shell rear wheel weights |
| GT235, GT245 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear |
| GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590 | Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear |
X465, X475, X485, X495, X575, X585, X595 | Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear |
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
18 Steel Utility Cart
Order number: LPHDC18JD
Oilite is a trademark of Beemer Precision, Incorporated.
Drawbar
1-7/8-in. (48-mm) hitch ball1-7/8-in. (48-mm) hitch ball attaches to drawbar or rear hitch to allow towing. 0.75-in. (19-mm) diameter post thread is provided.
The hitch ball is available through Parts.
Magnetic hitch pinFits John Deere lawn and garden tow behind attachments.
- Strong magnetic grip
- Rust resistant
- Easy to install, secure fit
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
Magnetic hitch pin
Order number: LP63768
Home Maintenance Kits
LG265 home maintenance kit
Typical home maintenance kitHome maintenance kits are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual.
The LG265 home maintenance kit includes the following:
Quantity | Description |
1 | Engine oil filter |
2 | Engine oil quart |
1 | Fuel filter |
1 | Air filter element |
1 | Air filter element foam |
2 | Spark plug |
Mcs Chutes
MC542 Material Collection SystemFeatures and benefits:
- Fits 17P Poly Cart (not included with MC542)
- Large 53-cu ft (1.5 m3), 42-bu (1,480-L) capacity with full 83-in. (210.8-cm) clamshell opening - perfect for fall cleanup of leaves
- Powerful 205-cc, 9.00 lb-ft* gross torque engine
- Welded steel impeller for greater suction
- Large, 8-in. (20.3-cm) diameter wire embedded hose for less clogging and larger volume pickup
- Full opening for easy access
- Vented 15-oz (425-g) poly-mesh canopy that keeps dust and exhaust away from the operator
- Contoured handles for easier open/close operation and emptying
- Custom pre-cut mower boot and welded bracket assembly for easy fit to the following John Deere Mower Decks that can be ordered separately:
- 48, 54, and 62 in. (122, 137, and 158 cm)
- 54- and 60-in. (137- and 152-cm) HC
- 60-in. (152-cm) 7-Iron
*Per SAE J1940 as rated by engine manufacturer. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s web site for additional information.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
MC542 Material Collection System, boot and hose kits
Order number:
LP22834 - MC542 Material Collection System
LP23080 - Boot kit for 48-in. (122-cm) Mower Deck (48X)
LP65063 - Boot kit for 48-in. (122-cm) Mower Deck (48A)
LP65064 - Boot kit for 54-in. (137-cm) Mower Deck (54A)
LP23081 - Boot kit for 54-in. (137-cm) Mower Deck (54X)
LP44079 - Boot kit for 54-in. (137-cm) Mower Deck (54 HC)
LP23082 - Boot kit for 60-in. (152-cm) Mower Deck (60 HC and 7-Iron™ 60D)
LP23083 - Boot kit for 62-in. (157-cm) Mower Deck
LP39450 - MC542 Hose kit
Specifications
| Capacity | 42 bu (1500 L), 53 cu ft (1.5 m3) |
| Engine | 205 cc, 9.00 lb-ft* gross torque |
| Impeller | Welded steel |
| Tractor compatibility** | X500 Multi-Terrain and X700 Series Tractors |
| Mower compatibility | 48-, 54-, 54- HC, 60- 7-Iron, 60- HC, and 62-in. (122-, 137-, 137-, 152-, 152-, and 157-cm) John Deere Mower Decks |
*Per SAE J1940 as rated by engine manufacturer. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s Web site for additional information.
**For proper braking and operation, the loaded weight of the collection system should never
exceed the weight of the tractor, or other towing unit, plus the operator. Additional ballast on
the tractor, or other towing unit, may be needed to meet this requirement.
14-bu (493-L) Power Flow chute
Click-N-Go bracketsThe Power Flow chute is required, along with the high-performance Power Flow blower, to use the 3-bag Power Flow MCS. The chute includes a convenient handle and a fill indicator that tells the operator when the bags are getting full.
One chute works with several tractor applications. Trim lines on the chute are referenced in the instructions so the chute can be cut to the proper length for the tractor/mower application.
The 3-bag hopper installs to the tractor with the Click-N-Go™ mounting system:
- Click-N-Go brackets must be ordered separately.
NOTE: The chute can be used with 48C/48X, 54C/54X, 60-in. (152-cm) 7-Iron™, 62C/62X, 62D, 54 HC, and 60 HC Mowers.
Power Flow chute and blower
Hopper, chute, and blowerThe Power Flow chute is required, along with the high-performance Power Flow blower, to use the 2-bag Power Flow material collection system. The chute includes a convenient handle and a fill indicator that tells the operator when the bags are getting full.
One chute works with several vehicle applications. Trim lines on the chute are referenced in the instructions so the chute can be cut to the proper length for the vehicle/mower application.
Power Flow chute for MC519 Cart MCSThe Power Flow chute is required, along with the high-performance Power Flow blower, to use the MC519 Cart MCS.
Mcs Hoppers
3-bag Power Flow MCSThe 14-bu (493-L), 3-bag Power Flow MCS increases the versatility of the X500 Multi-Terrain Tractors and the GT and GX Series garden tractors equipped with a 48-in. (122-cm) or 54-in. (137-cm) Convertible or Edge™ Xtra mower and C-Series high-performance Power Flow blower.
The large 14-bu (493-L) capacity means the operator can collect a large area of grass or leaves before needing to stop to empty the bags.
7-bu (247-L) hopper (cut-and-throw)
7-bu (247-L) hopper (Power Flow™)The 7-bu (247-L) hopper provides an efficient means of collecting grass clippings and leaves using either the cut-and-throw rear bagger or the Power Flow material collection system (MCS):
- 38-in. (97-cm) and 42-in. (107-cm) mower decks use the cut-and-throw system.
- 48-in. (122-cm) and 54-in. (137-cm) mower decks use the Power Flow system.
The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags.
The 7-bu (247-L) MCS features:
- 7-bu (247-L) capacity
- Easy-to-attach lower chute (ordered separately)
- Handle on chute
- Air exhaust duct
- Convenient spring-latch
- Airflow fill indicator
- Quik-Tatch mounting
- Sealed hopper top
- Loose-knit bags available
Loose-knit bags
Close-up view of loose-knit bag materialA loose-knit bag is available as an option for use with 7-bu (247-L) cut-n-throw rear baggers and Power Flow™ baggers:
- Two loose-knit bags are required.
- The loose-knit bag allows more air to flow through and provide more complete bag filling in wet and heavy grass conditions.
MC519 Cart with Power Flow™ blower and chute
MC519 CartThe MC519 is compatible with Select Series™ X320, X324, X340, X360, X380, X384, X390, X394, X500 Series Multi-Terrain, X700 Series Tractors, GT200, GX300, X400, and X500 Heavy-Duty Garden Tractors, and 110 through 455 Garden Tractors.
NOTE: MC519 is not compatible with D100 Series, LA100 Series, L100 Series, 100 Series, or Select Series model X300, X304, X310, X330, X350, X354, X370 Tractors, LT, LX, or SST Lawn Tractors, or G100 or G110 Garden Tractors.
The MC519 is designed to provide the versatility of two products in one - a utility cart or a material collector.
Utility cart:
- 7.5 cu ft (212 L) heaped or 500 lb (227 kg) of capacity
- Ideal for hauling topsoil, gravel, sand, firewood, mulch, etc.
Collector:
- Large, 19-bu (23-cu ft, 670-L) capacity with a standard equipment cover
- Can be equipped with a Power Flow blower and chute for vacuuming grass clippings, thatch, pine needles, and leaves
Potential customers include homeowners, commercial operators, nurseries, and estates.
Easy to hook up and operate
MC519 hitchThe MC519 hitch can be connected to the tractor without tools in about one minute.
In combination with non-jackknifing caster wheels, this semi-rigid hitch makes it easy to maneuver the cart/collector.
An easy-to-reach handle allows dumping the cart/collector from the tractor seat.
For dumping extra-heavy loads, the operator can use the hand grip on the front of the box.
Standard equipment coverA standard equipment cover can be installed in a matter of seconds to convert the utility cart to a collector:
- Large plastic window in the cover allows the operator to see when the collector is full.
- Cover folds flat for space-saving wall storage.
Strong construction
MC519 Cart BaggerThe MC519 has the durability to handle homeowner or commercial applications:
- Steel support structure is mig-welded for strength.
- Cart box is made of strong, 18-gauge, 0.05-in. (1.2-mm) steel for durability.
- Puncture-resistant 4-ply rated (PR) turf tires are standard equipment.
- Greaseable bearings (wheels and casters) enable long life.
- Cover is made of tough 14-oz (397-g) black vinyl-coated nylon. The lower sides are made of 9.5-oz (269-g) black polyester knitted cloth.
Power Flow™ option (Power Flow blower and discharge chute must be ordered separately)
Power Flow blower and discharge chute optionsWhen equipped with the optional blower and discharge chute (ordered separately), the MC519 becomes a material collection system.
The blower housing material is high-density polyethylene and the fan material is ultra-high molecular weight polyethylene:
- Lightweight for easy handling and minimal effect on mowing smoothness
- Will not rust or corrode
- Resists wear and abrasion caused by sand
- Contoured design for clean appearance and smooth grass flow
Specifications
| Capacity | |
Collector | |
Volume | 19 bu (670 L) or 23 cu ft (0.67 m3) |
Load | 500 lb (226.8 kg) |
Cart | |
Volume | 7.5 cu ft (0.21 m3) heaped; 6 cu ft (0.17 m3) struck |
Load | 500 lb (226.8 kg) |
| Box dimensions | |
Width | 42 in. (107 cm) |
Length | 30 in. (76 cm) |
Depth | 8 in. (20 cm) |
| Overall dimensions, including hitch | |
Width | 45.5 in. (116 cm) |
Length | 51 in. (129.5 cm) |
Depth | 44 in. (112 cm) |
| Clearance | 10 in. (25 cm) |
| Dump angle | 50 degrees |
| Weight, shipping (with carton) | 176 lb (80 kg) |
| Weight, net | |
Cart only | 119 lb (54 kg) |
Cover only | 26 lb (12 kg) |
Hitch only | 7.7 lb (3.47 kg) |
| Power Flow™ dimensions | |
Fan diameter | 13 in. (334 mm) |
Fan width | 2.75 in. (70 mm), 3.75 in. (95 mm) for C Series Blowers |
Fan blades | 4, 5 for C Series Blowers |
Fan speed | 3400 (will vary with mower width) |
| Tires | 4.10x3.50 4PR |
| Bearings | |
Wheel | Iron/Oilite™ with grease fittings |
Caster | Roller ball with urethane seals and grease fittings |
| Box material | 18-gauge, 0.05-in. (1.2-mm) steel |
| Cover material | 14-oz (0.4-kg) black vinyl-coated nylon top, front, and upper side flaps 9.5-oz (0.27-kg) black polyester knitted cloth lower sides 0.397-sq yd (0.33-m2) knitted polyester netting |
Oilite is a trademark of Beemer Precision Incorporated.
Tractor compatibility and requirements
The MC519 Cart is compatible with the following tractors with 48A and 54A Accel Deep™ Decks, 38, 46, 48, 48C Convertible, 48 Edge™ Xtra Deck, 50-, 54-, 54C Convertible, 54 Edge Xtra Deck, 60, 60-in. (152-cm) 7-Iron™, 62C Convertible, 62 Edge Xtra Deck, or 54-in. (137-cm), or 60-in. (152-cm) High-Capacity (HC) mowers:
- 110 and 112 Tractors (SN 100,000 and above)
- 200, 210, 212, 214 and 216, GT242, GT262, GT275, GT225, GT235, GT235E, GT245, 240, 245, 260, 265, 285, 320, 325, 335, 345, 355D, GX255, GX325, GX335, GX345, and GX355 Tractors
- Select Series™ X320, X324, X340, X360, X380, X384, X390, and X394 Tractors
- X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
- 316, 318, 322, and 332 Tractors
- NOT compatible with 100, L100, LA100, D100, LT, LX, X300, X304, X310, X330, X350, X354, X370, or SST Series Lawn Tractors or G100 or G110 Garden Tractor
- NOT compatible with 316-332, 325-355D, GX325-GX355 Series Tractors with a 38-in. (97-cm) mower and blower assembly or 38-in. (97-cm) QT blower assembly
- 420 and 430
- 425, 445, and 455
- X465, X475, X485, X495, X575, X585, and X595 Heavy-Duty Garden Tractors (HDGT's)
- X700, X720, X724, X728, X729, X740, X744, X748, X749
- X710, X730, X734, X738, X739, X750, X754, X758
- NOT compatible with tractors (X400/X500 HDGT's or X700 Tractors) that have the 3-point hitch or 540 power take-off (PTO) shift arm attached
- 325/345 with 38-in. (97-cm) mower and Power Flow system requires M118053 arm
Requirements and/or recommendations:
1. Four 200 lb (91 kg) cast-iron rear wheel weights are recommended for ballast on GT242, GT262, GT275, GT225, GT235, GT245, 240, 245, 260, 265, 285, 320, 325, 335, 345, 355D, GX325, GX335, GX345, GX355, X500, X520, X534, and X540 Tractors when operating on slopes. Select Series X320, X324, X340, X360, X380, X384, X390, and X394 Tractors may need ballast to increase traction, stability, or steering, especially when operating on hillsides or if carrying heavier materials in the MC519 Cart.
2. 420 and 430 Tractors require one AM118915 60-in. (152-cm) Power Flow installation kit for mounting 60-in. (152-cm) Power Flow blower.
3. 316, 318, 322, 330, 332, 420, 430 require black hitch mounting bracket M115521.
Required on MC519 (S/N 045001 - ) to mount on the following Tractors:
- 316, 318, 322, 330, 332, 420, and 430
- 425 Two Wheel Steer (- A040774) without 3-Point Hitch
- 425 All Wheel Steer (- B040203) without 3-Point Hitch
- 445 (- C040542) without 3-Point Hitch
- 455 Two Wheel Steer (- C040507) without 3-Point Hitch
- 455 All Wheel Steer (- D040074) without 3-Point Hitch
This bracket was included in older MC519's but was eliminated when the 425, 445 and 455 Tractors hitch design was changed and the bracket was no longer required for hookup.
4. GT, 300 and GX 48C Mowers built before April 2002 may need 0.5-in. (13-mm) hole drilled in mower wheel bracket for installing BM20667 or BM21495 48C HP Blower. See Service Information Bulletin 02-11-45-7 for detailed instructions.
5. GT, 300 and GX 48C Mowers built after April 2002 may need slot added to mower wheel bracket for installing BM19439 and BM20523 QT Blower. See Service Information Bulletin 02-11-45-7 for detailed instructions.
6. X400/X500 HDGT's and X700 Ultimate Tractors require LP52039 Adaptor Kit for MC519 Cart, available from Order Zone.
7. X400/X500 HDGT's and X700 Ultimate Tractors with a 48C/48X Mower require BM20976 or BM22798 48 HP Adapter Kit to install BM20667 48C High-Performance Power Flow Blower Assembly to accommodate this mower's rotateable wheels:
- One BM20976 48C/48X High Performance Blower Assembly Adapter Kit is required to install the BM20667 48C HP Power Flow Blower on a 48C or 48X Mower Deck (SN -050588) with wheels that rotate.
- One BM22798 48C/48X High Performance Blower Assembly Adapter Kit is required to install the BM20667 48C HP Power Flow Blower on a 48X Mower Deck (SN 050589- ) with wheels that rotate.
8. The following older 425, 445, and 455 Tractors without a 3-point hitch also require black hitch mounting bracket M115521:
- 425 two-wheel steer (A040774 and below)
- 425 all-wheel steer (B040203 and below)
- 445 (C040507 and below)
- 455 two-wheel steer (C040507 and below)
- 455 all-wheel steer (D040074 and below)
9. BM20668 54C and BM20669 62C HP Power Flow Blowers require one AM133822 Mower Wheel Adjustment Pin for installation on 2004 and later 54C or 62C Mowers.
NOTE: In order to be used as a material collection system, an optional Power Flow blower and discharge chute must be ordered in addition to the LP49228 MC519 Material Collection System.
Ordering information
Customers, please contact a local John Deere dealer for availability and pricing information.
MC519 Material Collection System
Order number: LP49228
MC542 Material Collection SystemFeatures and benefits:
- Fits 17P Poly Cart (not included with MC542)
- Large 53-cu ft (1.5 m3), 42-bu (1,480-L) capacity with full 83-in. (210.8-cm) clamshell opening - perfect for fall cleanup of leaves
- Powerful 205-cc, 9.00 lb-ft* gross torque engine
- Welded steel impeller for greater suction
- Large, 8-in. (20.3-cm) diameter wire embedded hose for less clogging and larger volume pickup
- Full opening for easy access
- Vented 15-oz (425-g) poly-mesh canopy that keeps dust and exhaust away from the operator
- Contoured handles for easier open/close operation and emptying
- Custom pre-cut mower boot and welded bracket assembly for easy fit to the following John Deere Mower Decks that can be ordered separately:
- 48, 54, and 62 in. (122, 137, and 158 cm)
- 54- and 60-in. (137- and 152-cm) HC
- 60-in. (152-cm) 7-Iron
*Per SAE J1940 as rated by engine manufacturer. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s web site for additional information.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
MC542 Material Collection System, boot and hose kits
Order number:
LP22834 - MC542 Material Collection System
LP23080 - Boot kit for 48-in. (122-cm) Mower Deck (48X)
LP65063 - Boot kit for 48-in. (122-cm) Mower Deck (48A)
LP65064 - Boot kit for 54-in. (137-cm) Mower Deck (54A)
LP23081 - Boot kit for 54-in. (137-cm) Mower Deck (54X)
LP44079 - Boot kit for 54-in. (137-cm) Mower Deck (54 HC)
LP23082 - Boot kit for 60-in. (152-cm) Mower Deck (60 HC and 7-Iron™ 60D)
LP23083 - Boot kit for 62-in. (157-cm) Mower Deck
LP39450 - MC542 Hose kit
Specifications
| Capacity | 42 bu (1500 L), 53 cu ft (1.5 m3) |
| Engine | 205 cc, 9.00 lb-ft* gross torque |
| Impeller | Welded steel |
| Tractor compatibility** | X500 Multi-Terrain and X700 Series Tractors |
| Mower compatibility | 48-, 54-, 54- HC, 60- 7-Iron, 60- HC, and 62-in. (122-, 137-, 137-, 152-, 152-, and 157-cm) John Deere Mower Decks |
*Per SAE J1940 as rated by engine manufacturer. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s Web site for additional information.
**For proper braking and operation, the loaded weight of the collection system should never
exceed the weight of the tractor, or other towing unit, plus the operator. Additional ballast on
the tractor, or other towing unit, may be needed to meet this requirement.
Dump from the seat capability for 3-bag material collection systems (MCS)
MCS 14The MCS 14 attachment is designed to provide dump-from-seat grass collection and expulsion for all John Deere 3-bag material collection systems (MCS) on the X500 and X700 Series Tractors. The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.
The aluminum body is light weight and easy to handle. A conveniently located lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere material collection system, installation is a breeze with simple hand tools.
Features:
- Lightweight aluminum construction
- Designed for full material expulsion
- Easy access self-latching, spring-tripped handle
- Ships almost fully assembled (5 minute handle assembly)
- Installs in seconds (after initial assembly)
Benefits:
- Easy - Convenient access to dump handle directly from seat
- Clean - No material handling, no mess
- Efficient - Unload and go without leaving the seat
NOTE: Fits John Deere 3-bag material collection systems on X500 and X700 Series Tractors.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
MCS 14 attachment
Order number: LP47170
Dump from seat capability for X500 and X700 Series 2-bag material collection systems (MCS)
MCS 8The MCS 8 attachment is designed to provide dump from the seat grass collection/expulsion for all John Deere X500 and X700 Series tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.
The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere MCS, installation is a breeze with simple hand tools.
Features:
- Lightweight aluminum construction
- Designed for full material expulsion
- Easy access self-latching spring-tripped handle
- Ships almost fully assembled (5 minute handle assembly)
- Installs in seconds (after initial assembly)
Benefits:
- Easy - Convenient Access to dump handle directly from seat
- Clean - No material handling, no mess
- Efficient - Unload and go without leaving the seat
NOTE: Fits All John Deere X500 and X700 Series 2-bag material collection systems. Not compatible with EZtrak™ Zero-Turn Mowers.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
MCS 8 attachment
Order number: LP47169
Mcs Power Flow Blowers
HP Power Flow blower assemblyThe high-performance (HP) Power Flow blower assembly for the 48-in. (122-cm) Accel Deep™ Mower is used with the hopper and chute to provide a very effective material collection system. A hopper and chute must be ordered separately to complete this material collection system.
Miscellaneous
Tractor shovel in raised position
Tractor shovel in emptying positionThe 40-in. (102-cm) Tractor Shovel expands the usefulness of any John Deere Select SeriesTM X300 or X500 Multi-Terrain Tractor by allowing it to pick up and move material. It utilizes a high-capacity electric actuator that provides lift, lower, dump, and down force functions. No front blade is required.
The tractor shovel takes the back-breaking labor out of jobs like moving mulch, spreading gravel, ground grading, and more. It installs using the tractor's existing frame holes. After initial installation, it can be removed or installed without tools.
The innovative opening design of the tractor shovel, combined with the lift height, assures complete emptying of material. The tractor shovel can also be used for scraping and grading by locking the shovel in the raised position.
Tractor recommendations and requirements:
- Rear tractor ballast recommended for improved traction
- Tire chains recommended for moving snow
- No tractor requirements
Key features:
- Can be used when upper part of shovel is locked in the raised position as a blade (without angling capability)
- Raised and lowered with electric actuator
- Provides down force to increase scraping effectiveness of blade
- Pick-up, transport, and empty a variety of loose material including soil, gravel, mulch, and snow
- Can be removed in 10 minutes or less
Compatibility:
- LP63767 40-in. (102-cm) Tractor Shovel is Compatible with:
- Select Series X300, X300R, X304, X310, X320, X324, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
- Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
Unique shovel design
40-in. (102-cm) Tractor Shovel (with optional brush guard)
Shovel opens for emptying material or bladingThe unique design of the 40-in. (102-cm) Tractor Shovel allows an operator who has a Select Series™ X300 Series (including X300R and X350R) or X500 Series Multi-Terrain Tractor to use the tractor shovel for lifting and moving material as well as for typical blade functions (without blade angling), such as blading, leveling, and scraping:
- Unique shovel design empties material completely.
- Shovel can be locked in the raised position for blading applications.
Operation
Operator station view
Control panelThe tractor shovel is operated from the tractor seat with the use of a control rod and an electric switch.
Electric actuator powers the tractor shovelAn electric actuator provides power to raise, lower, and empty the shovel.
To raise or lower the tractor shovel, use the electric switch on the tractor shovel panel.
Depress the bottom of the switch to raise the shovel and depress the top of the switch to lower the shovel.
Control rod for opening/closing of the shovelShovel in dump positionTo open the shovel for emptying, raise it completely and then pull the control rod to the yellow area of the rod and press the upper end of the electric switch.
To close the shovel, press the lower end of the electric switch until the control rod releases to the black area of the rod.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
40-in. (102-cm) Tractor Shovel
Order number: LP63767
Tractor compatibility and requirements
The 40-in. (102-cm) Tractor Shovel is compatible with the following tractors:
- Select Series X300, X300R, X304, X310, X320, X324, X330, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
- Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
Requirements and/or recommendations:
- Rear ballast is recommended for best performance.
- Tire chains are helpful and recommended when operating in snow.
Operation of the shovel for blading or leveling
Hand lift for locking into the blading position
Blading latch in the locked position To use the tractor shovel for blading, use the handle on the right side of the shovel to raise it and then use the locking lever to lock it in the raised position.
Specifications
Length of tractor shovel | 40 in. (101.6 cm) |
Depth of tractor shovel | 11 in. (27.9 cm) |
Capacity | 1.7 ft3 (48 L) |
Cutting blade material | 0.250-in. (6.4-mm) hardened steel |
Material thickness, shovel | 0.125 in. (3.2 mm) |
Load capacity | 150 lb (68 kg), evenly distributed |
Lift height | 4 in. to 6 in. (10.2 cm to 15.2 cm), depending on the tractor model |
Shipping weight | 110 lb (50 kg) |
Warranty | One-year limited warranty on parts |
Battery chargerThis fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:
- Automatically determines if the battery is 6- or 12-V and adjusts accordingly
- Helps maintain battery in good condition and ensures it is fully charged
- Powers on to charge battery and powers off when fully charged
- 'Onboard' feature allows mounting next to the battery on collector, street rods, and other occasional-use vehicles
- 1.5-amp trickle charges small batteries in 2 to 12 hours
- Maintains large battery charges
- Hookup protection guards battery and charger from damage
Includes a choice of battery connection methods:
- Standard color-coded clips to connect to any battery
- Cable with quick-disconnect plug and end loops that can be bolted to battery terminals and easily unplugged from charger when not in use
Double bucket holder (buckets ordered separately)Transporting mulch, plants or debris is easier with the double bucket holder. Just attach the holder bracket to the rear of any Select Series™ X300, X500 Series Multi-Terrain, or X700 Ultimate™ Series Tractor. It is designed to carry up to 70 lb (32 kg) of material.
For use with standard 5-gal. (19-L) buckets - ordered separately.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Bucket holder (double)
Order number: LPJD301
Bucket (5-gal.)
Order number: LPJD400 (2 required)
Double bucket holderTransporting mulch, plants, or debris is easier with the double bucket holder. Just attach the holder bracket to the rear of any Select Series™ X300, X500 Series Multi-Terrain, or X700 Series Tractor. It is designed to carry up to 70 lb (32 kg) of material for transporting mulch, plants, yard waste, or for adding ballast.
For use with the included John Deere 5-gal. (19-L) buckets.
NOTE: May not fit all tractor models with a weather enclosure or cab installed.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Bucket holder (double) with buckets
Order number: LPJD301W
5-gal. (19-L) bucketThis black 5-gal. (19-L) bucket perfectly complements the CargO Mount™ single and double bucket holders. It is made of sturdy black plastic.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Bucket - 5 gal. (19-L)
Order number: LPJD400
8-oz (237-mL) Fuel-Protect gasoline stabilizerJohn Deere Fuel-Protect gasoline stabilizer is a unique formula developed to ensure optimum performance and protection year-round:
- Has corrosion preventers
- For lawn and garden equipment and other gasoline-powered vehicles
- Ensures quick starts in all two- and four-cycle engines
- Use in gasoline, gasoline-oil mixture, and ethanol blends
- Use to treat gas cans at each fill-up or use at every fill-up of vehicle
- Keeps fuel fresh for 12 months
- Contains a fuel injector and carburetor cleaner
- 1 oz (29.6 mL) treats 2 gal. (7.6 L)
Always use fuel stabilizer in gasoline.
Fuel sitting in gas tanks or gas containers for more than 30 days begins to degrade. Also, blended fuels and water in gasoline can form acids that corrode fuel-system components. Protect the investment - use John Deere fuel stabilizer with corrosion preventers and prevent hard starting, surging, lack of power, poor idle, flooding, and will not run or stay running conditions caused by poor-quality fuel. Ask a local John Deere dealer or visit JDParts.
Helpful tips:
- Add fuel stabilizer every time fuel is purchased.
- Deere gasoline-powered equipment is recommended to run on a minimum of 87 octane gasoline.
- John Deere Fuel-Protect for gasoline is safe to use in all types of gasoline, including gasoline/oil mixtures and blended fuels containing up to 10 percent ethanol.
- Use plastic fuel containers to store fuel; ask a local John Deere dealer.
- For best results, use a spill-proof gas can that automatically seals the gas can vent.
- Store fuel in a cool, dry, dark place in a sealed fuel can.
- Fill tank to the top every time the machine is put away.
- Make sure tank is drained if stored for the winter or treated if left for prolonged periods of time.
Please refer to the operator’s manual for additional recommendations and warranty information.
Fuel related issues are not considered a warrantable condition as there is no defect in the materials or workmanship of the machine.
For more information on fuel, visit John Deere Groundscare.
Smart connectorThe John Deere MowerPlus smart connector wirelessly links a Select Series X300 or X500 Tractor to the MowerPlus app on a mobile device:
- No tools are needed for installation.
- Detailed set-up instructions are included.
- The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on and the mobile device app is running within range.
- The wireless connector and app work together to offer helpful information.
Tractor features available for viewing on the MowerPlus app include:
- Tractor engine hours automatically synchronized to the app
- In-app maintenance reminders and log, based on engine hours
- Fuel level - even when away from the tractor, the app remembers information, like the fuel level, from the last synchronization.
- When thinking ahead about Saturday morning mowing, the operator can make sure the tractor is fueled and ready to go.
- Help to determine the best time to mow
- Expert pre-mow optimization tips
- Maintenance walk-through instructions
The operator is able to visit their device’s app store to see new app features as they are added.
Since the smart connector communicates instrument cluster information, future app releases will be able to provide additional operating recommendations and notifications.
MowerPlus smart connector (BUC10537) for Select Series X300 and X500 Tractors
Smart connector, wiring harness, and twist tiesOne end of the wiring harness plugs into the back of a Select Series X300 or X500 Tractor instrument cluster. The other ends plug into the smart connector and the tractor's wiring harness.
Compatibility and requirements
MowerPlus smart connector (BUC10537) is for model year 2016 and later Select Series X300 and X500 Tractors.
MowerPlus smart connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store:
- iOS® version 10 or higher is compatible with the smart connector.
- Android™ version 5.1 or higher is compatible with the smart connector.
NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.
Bluetooth is a trademark of Bluetooth SIG, Inc. Android is a trademark of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.
Seat net kitSeat net kit provides a convenient storage area for gloves, and other small items. It is available for open-back seats.
Compatibility kit partsMower Blades
Side-discharge blade/mulching bladeSide-discharge blade/mulching bladeMower Decks
Dry-condition kit components
Dry-condition kit installed on mower deckThe BM26238 dry-condition kit, 48A is available for 48A Accel Deep Mower Decks used on S240 Tractors, model year 2016 and later X300 and X500 Select Series™ Tractors and Residential ZTrak™ Mowers. The 48A dry-condition kit will also work with any X700 Signature Series Tractor (model year 2013 and later) that is equipped with a 48A Mower Deck.
The dry-condition kit will reduce the amount of blowout around the mower deck when side discharging, mulching, or bagging in dry grass and leaf conditions. For optimum mowing performance in lush-grass conditions, the dry-condition kit baffles may be removed.
Similar grass groomer shown - top view
Similar grass groomer shown - side viewFeatures and benefits
- Homeowners can now achieve results just like the professionals
- Brush is easy to adjust for varying mower cutting height
- Brush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turf
- The brush striping kit is a very economical and functional attachment
Compatible with the following:
- 48A or 54A - 48-in. (122-cm) or 54-in. (137-cm) Side-Discharge Mower for X350, X354, X370, X380, X384, X390, X394, X570, X580, X584, and X590 (model year 2016) Tractors
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
48A or 54A - 48-in. (122-cm) and 54-in. (137-cm) grass groomer
Order number: LP63761
Mower deck leveling gaugeLeveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.
Can be used for:
- Lawn tractors
- Lawn and garden tractors
- Riding mowers
- Front mowers
- Commercial walk-behind mowers
- Zero-turn-radius mowers
Mulch Kits
MulchControl advantages and benefits
Z535M ZTrak™ with Accel Deep 48A Mower
X730 Tractor with 48A Mower DeckThe MulchControl attachment for the 48A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:
- A beautiful looking lawn
- Grass clippings not blown onto the operator, driveways, or flower beds
- Less fertilizer use
- Elimination of the effort needed to dispose of clippings
How MulchControl works
MulchControl baffle open (similar mower from X700 Series Tractor shown)MulchControl baffle closed (similar mower from X700 Series Tractor shown)MulchControl is an innovative, simple design that is easy to use and maintain:
- The MulchControl attachment includes baffles to control the flow of material under the deck.
- The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulching and side-discharge modes.
- When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
- When the MulchControl baffle is closed, this material stays within the deck and gets chopped into mulch and deposited in the turf.
MulchControl baffle closedMulchControl handle- The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
- The operator is required to get off of the machine in order to engage or disengage mulch mode.
- Changing from mulching to side discharging or vice versa takes only a few seconds.
MulchControl is well-suited to the following mowing situations:
- Usually mulch, but side discharge when grass gets too long
- Usually side-discharge, but would like to be able to close the chute to control clippings
- Always mulch a main lawn, but often side discharge secondary lawns
- Bag clippings, but want to go farther before emptying bags
- With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.
MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharge or bagging when needed.
MulchControl limitations
While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
- When cutting strong southern grasses, such as Zoysia and Bermuda
- When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
- When optimum bagging and lawn clean-up is desired
MulchControl advantages and benefits
Mower equipped with electric one-touch MulchControlMulchControl switchThe 48-in. (122-cm) electric one-touch MulchControl attachment enhances versatility and productivity. A mower deck equipped with electric one-touch MulchControl not only does an excellent job of mowing and mulching, but it can also be quickly converted to side discharge or mulch mode with the touch of a switch:
- Easily converts while mowing from side discharge mode to mulch mode or vice versa
- In mulch mode, controls clippings dispersion in unwanted areas (driveways, landscape beds, near buildings, windows, parking lots, etc.)
- Reduces cleanup time needed to dispose of clippings
- Will reduce the amount of material entering a material collection system because, even in the side discharge mode, MulchControl will mulch about one third of the material because of the additional baffles under the mower deck
How electric one-touch MulchControl works
A tractor equipped with the electric one-touch MulchControl attachment delivers unprecedented levels of productivity and versatility. A convenient, dash-mounted switch provides operators the ability to change between side discharging and mulching. A heavy-duty baffle opens and closes easily with the touch of the dash-mounted switch.
MulchControl electric switch
MulchControl electric actuatorA dependable electric actuator is used to close and open the discharge baffle. The mower deck can easily be converted from side discharge mode to mulch mode or vice versa in a few seconds by activating the switch.
MulchControl baffle open (similar mower deck shown)MulchControl baffle closed (similar mower deck shown)MulchControl is an innovative, simple design that is easy to use and maintain:
- The MulchControl attachment includes baffles to control the flow of material under the deck.
- The MulchControl baffle, or divider, between the left and middle spindles is about halfway down. The height is designed to balance the mulch and side discharge modes.
- When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
- When the MulchControl baffle is closed, this material stays within the deck and gets chopped into mulch and deposited in the turf.
- The MulchControl electric switch is located on the tractor dash to open and close the discharge baffle.
- The operator is not required to get off of the machine in order to engage or disengage mulch mode.
MulchControl is well suited to the following mowing situations:
- For operators who usually mulch, but side discharge when grass gets too long
- For operators who usually side discharge, but would like to be able to close the chute to control clippings
- For operators who always mulch a main lawn, but often side discharge secondary lawns
- For operators who bag clippings, but want to go farther before emptying bags (48A and 54A Mower Decks only)
MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging or bagging when desired.
With electric one-touch MulchControl, operators can convert between modes without interrupting the mowing process, making it practical to change between modes as conditions require:
- When approaching clean areas like driveways or flowerbeds where clippings would be undesirable
- When a breeze might blow clippings back onto the operator
- For side discharge mowing only the areas of the property where grass is too tall or thick for mulching
- With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching
- With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.
- Models equipped with a 42A Mower Deck require a MulchControl baffle be removed to install the bagger chute; see 42A versatility explanation for more information.
Advantages of MulchControl include:
- Performance is improved.
- Mulching is beneficial because it returns the clippings to the ground as fertilizer, which promotes lawn growth.
- Clippings are much smaller, which allows them to fall into the grass and be removed from view.
- Unsightly grass clippings are not blown onto driveways or into flower beds.
- Fertilizer use is reduced and provides associated environmental benefits.
- Uptime is increased.
- Operators can convert quickly between modes, making it possible to change between mulching and side discharging as conditions require.
- Mulching heavy, thick material can significantly reduce mower productivity. The ability to switch from mulch to side discharge mode ensures productivity, especially in grass too tall or thick to mulch effectively.
- Cost of operation is reduced.
- Controlling clipping dispersion reduces cleanup time.
MulchControl limitations
While in the side discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
- When cutting strong southern grasses, such as Zoysia and Bermuda
- When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
- When optimum bagging and lawn cleanup is desired
Compatibility
This electric one-touch MulchControl attachment is field installed and compatible with any 48A Mower installed on an X300 or X500 Select Series Tractor.
NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.
Protection
Brush guardThe brush guard adds a distinctive appearance to the tractor and protects the front of the tractor from damage.
Brush guard lowered to permit opening hoodBy removing one spring clip and pin, the brush guard may be lowered to permit opening the hood.
Front bumperThe front bumper adds a distinctive appearance to the tractor and protects the front of the tractor from damage.
Features include:
- Bumper can be easily mounted to the front of the tractor.
- Bumper can remain on the tractor when the front blade or snow blower are used.
Protective cover (large deluxe)Cover provides heavy-duty protection for Select Series™ X300, X500, and X700 Tractors.
Features include:
- Wipe-clean reinforced bottom around mower deck
- Easy-on side handles makes snugging down cover a snap
- Dual reinforced air vents let air circulate and help prevent ballooning in wind
- Interior lining and integrated muffler heat shield
- Heavy-duty fabric will not shrink or stretch and is coated for maximum water resistance
- Easy-on split back for fast fitting and easy access after installation
- Handy storage pocket reverses into an attractive storage case
- Two-year warranty
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
Protective cover (large deluxe)
Order number: LP93647
Protective cover (standard)Features include:
- Dual vents let air circulate and help prevent ballooning in wind
- Elastic shock cord in bottom hem for a quick, custom-like fit
- Coated fabric for maximum water protection
- One-year warranty
Cover provides all-season protection for 100 Series, S240 and Select Series™ X300 Series Tractors.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
Protective cover (standard)
Order number: LP93917
Seat cover, deluxe mediumDeluxe thick-cushioned seat cover provides superior protection, all-day riding comfort, and lots of storage:
- Access to lumbar adjustment controls
- Large-capacity rear-zippered cargo pocket
- Two side mesh beverage pockets
- Elastic cord in bottom hem for a custom fit
- Medium size fits seats with backrests up to 15 in. (38.1 cm)
Ordering information
Contact your local John Deere dealer for availability and pricing information.
Seat cover, deluxe medium
Order number: LP92624
Seat cover, standard mediumSeat cover protects new seats and renews old seats:
- Cushioned seat for extra comfort
- Four convenient pockets for keeping tools and gear within reach
- Elastic cord in bottom hem for a custom fit
- Medium size fits seats with backrests up to 15 in. (381 mm)
Ordering information
Contact your local John Deere dealer for availability and pricing information.
Seat cover, standard medium
Order number: LP92324
Rear Hitch
38-in. (96.5-cm) Box Scraper mounted to integral hitchThe box scraper is perfect for light grading or leveling of dirt, sand, gravel, etc. It can be reversed for backfilling or pushing snow.
Description: Sleeve Hitch Box Scraper
Size/Capacity: 38 in. (96.5 cm)
Blade: 0.19-in. (5-mm) carbon-steel construction
Frame: Center-mounted square-channel steel
Adjustments:
- Angles and locks 30 degrees in either direction for pushing instead of pulling
- Scarifier bar can be removed or locked into non-working position
- Converts to blade-only use
Weight bracket: Included
Fit-up: Easy hook-up to any sleeve hitch or integral hitch (ordered separately)
Warranty: One year limited
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
38-in. (96.5-cm) Box Scraper - Sleeve Hitch
Order number: LPBS38
42-in. (107-cm) Rear Blade mounted to integral hitchThe Rear Blade is just the right size to handle many grading or backfilling tasks. It can be reversed for backfilling or pushing snow.
Description: Sleeve Hitch Rear Blade
Size/Capacity: 42 in. (107 cm)
Blade: Heavy-duty carbon-steel construction
Frame: Center-mounted, square-channel steel frame
Adjustments: Angles and locks 30 degrees in either direction or rotates 180 degrees for pushing instead of pulling
Fit-up: Easy hook-up to any sleeve hitch or integral hitch (ordered separately)
Warranty: One year limited
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
42-in. (107-cm) Rear Blade - Sleeve Hitch
Order number: LPBB56
Cultivator mounted to integral hitchThe cultivator removes weeds and loosens soil between newly planted rows to give plants every opportunity to grow tall and strong.
Description: Cultivator - Sleeve Hitch
Size/Capacity: Adjustable 18 in. to 40 in. (45.7 cm to 101.6 cm)
Frame/Weights: 0.25-in. (0.64-cm) angle-steel frame, J-bolt provided for adding weight (i.e. concrete block)
Shanks: Seven 12-in. (30.5-cm) rigid shanks, 0.5-in. (13-mm) thick, solid steel
Adjustments: Adjustable depth-control skids provided
Fit-up: Easy hook-up to any sleeve hitch or integral hitch (ordered separately)
Warranty: One year limited
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Cultivator - Sleeve Hitch
Order number: LPCC55
Adjustable disk harrow mounted to integral hitchThe disk harrow can get a garden ready for planting quickly and easily. It breaks up chunky, plowed ground and prepares seedbeds with uniform, pulverized soil. Disk angles and spacing can be adjusted according to conditions. Add extra weight to the heavy steel tray for tough soil conditions. Hitch is provided so two disk harrows can be coupled together for a heavier, tandem unit.
Description: Sleeve Hitch Disk Harrow
Size/Capacity: Adjustable 29 in. to 39 in. (73.7 cm to 99.1 cm)
Frame: 11-gauge, 0.12-in. (3.0-mm) tray, 0.375-in. x 2-in. (9.5-mm x 51-mm) frame bar
Discs: Eight 11-in. (28-cm) heat-treated disk blades, 13-gauge, 0.09-in. (2.3-mm) steel
Fittings: Grease fittings on disk hangers
Adjustments: Choice of disk angles: 10, 15, or 20 degrees
Fit-up: Easy hook-up to any sleeve hitch or integral hitch (ordered separately)
Warranty: One year limited
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Disk Harrow - Sleeve Hitch
Order number: LPDD55
10-in. (25-cm) Moldboard Plow mounted to integral hitchGardens can be plowed quickly and easily with this all-time favorite plow. A rolling Coulter Blade cuts through the sod. The plow digs the furrow while the moldboard gently turns under old vegetation to make way for new planting.
Description: Sleeve Hitch Moldboard Plow
Size/Capacity: 10-in. (25.4-cm) width of cut
Plow Share: 0.25-in. (0.64-cm) solid steel
Coulter: 13-ga, 0.09-in. (2.3-mm) steel coulter kit included
Adjustments: No tools required to make depth adjustments
Fit-up: Easy hook-up to any sleeve hitch or integral hitch (ordered separately)
Warranty: One year limited
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Moldboard Plow - Sleeve Hitch
Order number: LPPP510
Mechanical integral hitchThe integral hitch permits the use of certain rear-mounted equipment, such as a cultivator, disk harrow, plow, or box scraper/blade attachment.
Key features include:
- Lifts/lowers using included mechanical hand-operated lever
- Provides reasonable lift efforts
- Uses one pin and spring clip for installation or removal
- May be installed at the same time as the mower, front blade, or snow thrower
- Can install 42-lb (19-kg) Quik-Tatch™ suitcase weights for ballast when using the integral hitch
- Compatible with GT and GX garden tractors and X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Integral hitch
Order number: LP31357
Rear Wheels And Tires
Rear turf and bar tires
Rear HDAP tire (optional wheel cover shown)Turf tire features:
- 12-in. (305 mm) wide
- Provide reduced tire pressure on lawn
- Ideal for mowing work
- Round shoulder design minimizes scuffing on turns
Bar-type tire features:
- 10-1/2-in. (267 mm) wide
- Provide more traction than turf tires
- Ideal for front blade or similar type work
Heavy-duty all-purpose (HDAP) tire features:
- 12-in. (305 mm) wide
- Provide more traction than turf tires
- Easier on turf than bar tires
Rear turf and bar tiresRear HDAP tire (optional wheel cover shown)Turf tire features:
- 12-in. (305 mm) wide
- Provide reduced tire pressure on lawn
- Ideal for mowing work
- Round shoulder design minimizes scuffing on turns
Bar-type tire features:
- 10-1/2-in. (267 mm) wide
- Provide more traction than turf tires
- Ideal for front blade or similar type work
Heavy-duty all-purpose (HDAP) tire features:
- 12-in. (305 mm) wide
- Provide more traction than turf tires
- Easier on turf than bar tires
Rear turf and bar tiresRear HDAP tire (optional wheel cover shown)Turf tire features:
- 12-in. (305 mm) wide
- Provide reduced tire pressure on lawn
- Ideal for mowing work
- Round shoulder design minimizes scuffing on turns
Bar-type tire features:
- 10-1/2-in. (267 mm) wide
- Provide more traction than turf tires
- Ideal for front blade or similar type work
Heavy-duty all-purpose (HDAP) tire features:
- 12-in. (305 mm) wide
- Provide more traction than turf tires
- Easier on turf than bar tires
Seat
Adjustable armrest optionLeft armrest in raised positionArmrests increase operator support and comfort, thus reducing fatigue and improving productivity, especially when mowing for extended periods of time. Armrests are made with a sewn vinyl cover stretched over foam and are adjustable to suit the operator.
This armrest kit is designed for the 21-in. (53.3-cm) professional two-piece seat shipped on model year 2013-2018 (serial number 010,001-070,000) X700 Signature Series Tractors and is optional for X500 Multi-Terrain Tractors.
Seat has convenient tilt-back feature
Tilt-back seat controlThe 21-in. (53.3-cm) professional two-piece seat, four-bar suspension, and slide shipped on Signature Series X700 Tractors is available as an upgrade seat and suspension for all X500 Multi-Terrain Tractors (model year 2006-). Key selling features for this seat include:
- Thick seat cushion for lasting comfort, even after a full day of use
- Back of seat can be angled to maximize operator comfort
- Convenient lever on the side of the seat unlocks back of seat to allow positioning
- Four-bar suspension and slide are included for extra comfort and bolt to the tractors fender-deck mounting holes
- BM24426 armrest attachment available as a field-installed option
Optional armrest attachment
Adjustable armrest option
Left armrest in raised positionArmrests increase operator support and comfort, thus reducing fatigue and improving productivity, especially when mowing for extended periods of time. Armrests are adjustable to suit the operator. This armrest attachment is designed for the 21-in. (53.3-cm) professional two-piece seat.
Compatibility
BM25346 21-in. (53.3-cm) professional two-piece seat, four-bar suspension, and slide is a field-installed attachment and compatible as follows:
- All Select Series™ X500 Series Multi-Terrain Tractors, model year 2006 and later
Two-piece adjustable seat with armrests, four-bar suspension, and seat slideThe 21-in. (53.3-cm) two-piece seat with armrests, four-bar suspension, and slide is available as an upgrade seat and suspension for all X500 Multi-Terrain Tractors (model year 2006 and newer). Key features for this seat include:
- Thick seat cushion for lasting comfort, even after a full day of use
- Back of seat can be angled to maximize operator comfort
- Convenient lever on the side of the seat unlocks back of seat to allow positioning
- Armrests for increased operator support and comfort are adjustable to suit the operator
- Four-bar suspension and slide included for extra comfort; bolt to the tractor’s fender-deck mounting holes
Compatibility
BUC10625 21-in. (53.3-cm) two-piece, adjustable seat is a field-installed attachment and compatible as follows:
- All Select Series™ X500 Series Multi-Terrain Tractors, model year 2006 and newer
Spanish North American Kit
Spark Arrester
Spark arresterSpark arrester is available to meet the law in the State of California requiring use of a spark arresting muffler under certain conditions.
Applies in other states and Canada when needed to comply with local ordinances or customer requests.
NOTE: This law basically requires that purchasers of certain products be given written notice that it is illegal to use such machines on forest-covered, brush-covered, or grass-covered land (except watered lawns) without a spark arrester. For further information on this law, consult No. 4442.5 of the California Public Resources Code.
Sprayers
25-gal. (95-L) Mounted Sprayer shown on X300 TractorFeatures and benefits:
- 100-psi (689-kPa) SHURflo® diaphragm-type pump is designed for high-hour commercial applications; it can be run dry without damage.
- It is easy to assemble the custom mounting brackets.
- Brackets use the existing frame holes.
- Brass-tipped spray wand is included as standard equipment; it is constructed of noncorrosive polypropylene material with Viton® components for multi-use applications.
- Check valves in the boom tips prevent siphoning and dripping, which can cause lawn spotting.
- Control valve directs spray to either the boom or spray wand for added convenience
and versatility. - Electrical hookup is simple with a convenient on/off switch.
- Sprayer contains a rugged translucent-yellow tank with molded fill-level indicators (in gallons).
- It is only a 15-second no-tools mounting after assembly.
Specifications
| Item number | LP22861 |
| Tank capacity | 25 gal. (95 L) |
| Boom | 60-in. (152.4-cm) boom, 90-in. (228.6-cm) spray |
| Spray wand reach | 30 ft (9.1 m) |
| Hose length | 19 ft (8 m) |
| Shipping weight | 35 lb (16 kg) |
| Warranty | 2-year consumer warranty |
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
25-gal. (95-L) Mounted Sprayer for X300 and X500 Tractors
Order number: LP22861
SHURflo is a trademark of SHURflo, LLC.
Viton is a trademark DuPont Performance Elastomers.
45-gal. (170-L) Tow-Behind SprayerThe 45-gal. (170-L) HP Tow-Behind Sprayer offers the ultimate in performance and versatility. With its large-capacity, high-volume electric pump, and premium pistol-grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It is the perfect match for the operator who wants extreme performance.
The heavy-duty frame rolls smoothly on 15x6 tires that minimize ground compaction and have a low profile, which maintains a low center of gravity for excellent stability. Cover ground quickly with flexible boom options: a 12.5-ft (3.8-m) precision folding boom, 24-ft (7.3-m) boomless, or no boom at all (boom sold separately).
HP features:
- 100-psi, 4.0-gpm (15-L/min) diaphragm-type pump is designed for high-hour applications and can be run dry without damage
- Redesigned frame cuts assembly time by 20 minutes compared to previous models
- Booms (sold separately) ship pre assembled
- Premium pistol-grip spray gun, designed for single-hand mist to 35-ft (10.7-m) stream
- Front-mount hose tender for easy hose access and storage
- Glycerin-filled pressure gauge
- TeeJet™ pressure regulation/recirculation valve
- Includes sprayer remote control
Additional features
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill-level indicators (in gal.)
Boom options (sold separately):
- 12.5-ft (3.8-m) precision spray boom
- 24-ft (7.3-m) boomless spray nozzles
Optional HP 12.5‐ft (3.8‐m) precision boom (LP22885)
HP 12.5-ft (3.8-m) precision boomThe HP 12.5-ft (3.8-m) precision boom (LP22885) is compatible with the 45-gal. (170-L) HP Tow-Behind Sprayer. The folding boom is made to cover ground quickly and thoroughly with five precision spray tips, TeeJet nozzle bodies, and commercial-grade diaphragm check valves. The outer tips offer versatility with built-in shut-offs to allow an adjustable 7.5-, 10-, or 12.5-ft (2.3-, 3.05-, or 3.8-m) spray swath.
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
45-gal. (170-L) HP Tow-Behind Sprayer
Order number: LP39963
Optional HP 12.5‐ft (3.8‐m) precision boom
Order number: LP22885
Optional HP boomless spray nozzles
Order number: LP22884
TeeJet is a trademark of Spraying Systems Company.
Features include:
- Folding spring hinge
- Breakaway design
- Five TeeJet tips and nozzle bodies
- Adjustable spray swath of 7.5-, 10-, or 12.5-ft (2.3-, 3.05-, or 3.8-m)
- 0.5-in. (1.3-cm) rubber hose
Optional 24-ft (7.3-m) HP boomless spray nozzles (LP22884)
24-ft (7.3-m) HP boomless nozzlesThe 24-ft (7.3-m) HP boomless spray nozzles (LP22884) are compatible with the 45-gal. (170-L) HP Tow-Behind Sprayer. The boom is perfect for covering ground quickly and thoroughly with a 24-ft (7.3-m) spray swath. It is ideal for uneven terrain or where precision spray application is not necessary.
Features include:
- Three TeeJet tips and nozzle bodies
- Commercial-grade diaphragm check valves
- 0.5-in. (1.3-cm) rubber hose
15-gal. (57-L) Tow-Behind SprayerSprayer comes complete with a boom that sprays 60 in. (152.4 cm) wide. It also has a 12-ft (3.7-m) hose with an adjustable handgun for spot spraying lawns, shrubs, etc.
Features include:
- This sprayer is an excellent choice for spraying small- to moderate-size lawns and shrubs.
- Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft (9.1-m) high.
- A 14-in. (35.6-cm) wand on the handgun is standard equipment to give added convenience when spraying trees.
NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).
This sprayer is especially suited for maintaining residential and small commercial properties:
- Sprayers provide an excellent way to apply liquid fertilizer.
- Herbicides and pesticides can be applied along with liquid fertilizer or separately.
Advantages of using liquid fertilizer over dry fertilizer:
- Fertilizer is more readily available to plants.
- The fertilizer need not be worked into the soil by watering or rain before it will work.
- Herbicides are more effective when applied with liquid fertilizer.
NOTE: Use these sprayers with liquid-base lawn care chemicals only. They are not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
15-gal. (57-L) Tow-Behind Sprayer
Order number: LP19478
25-gal. (95-L) Tow-Behind SprayerSprayer comes with a wider boom that sprays a 90 in. (228.6 cm) width. A 15-ft (4.6-m) hose and handgun are provided.
Features include:
- 100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
- Sprayer is designed to be a good choice for customers with larger lawns with trees to care for or for light commercial spraying.
- Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft (9.1 m) in height.
- The 14-in. (35.6-cm) wand on the handgun is included as standard equipment.
NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).
This sprayer is especially suited for maintaining residential and small commercial properties.
- Sprayers provide an excellent way to apply liquid fertilizer.
- Herbicides and pesticides can be applied along with liquid fertilizer or separately.
Advantages of using liquid fertilizer over dry fertilizer:
- Fertilizer is more readily available to plants.
- The fertilizer need not be worked into the soil by watering or rain before it will work.
- Herbicides are more effective when applied with liquid fertilizer.
NOTE: Use this sprayer with liquid-based lawn care chemicals only. It is not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
25-gal. (95-L) Tow-Behind Sprayer
Order number: LP19479
SHURflo is a trademark of SHURflo, LLC.
45-gal. (170-L) Tow-Behind SprayerFeatures include:
- Tow-behind; equipped with 4-position hitch.
Tow-behind sprayer is equipped with a boom that sprays a wide 120-in. (308.4-cm) width. The 45-gal.(170-L) sprayer is capable of covering more area with less refills:
- 100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
- The large capacity saves time by eliminating refills to finish larger lawns.
- The 19-ft (5.8-m) hose and handgun are helpful when spraying trees or other remote areas that cannot be reached with the sprayer itself.
- A 14-in. (35.6-cm) wand on the handgun is standard equipment.
NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).
This liquid sprayer is especially suited for maintaining residential and small commercial properties:
- Sprayers provide an excellent way to apply liquid fertilizer.
- Herbicides and pesticides can be applied along with liquid fertilizer or separately
Advantages of using liquid fertilizer over dry fertilizer:
- Fertilizer more readily available to plants
- The fertilizer need not be worked into the soil by watering or rain before it will work
- Herbicides are more effective when applied with liquid fertilizer
NOTE: Use this sprayer with liquid-based lawn care chemicals only. It is not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.
SHURflo is a trademark of SHURflo, LLC.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information,
45-gal. (170-L) Tow-Behind Sprayer
Order number: LP20485
Sprayers
45-gal. (170-L) Tow-Behind SprayerThe 45-gal. (170-L) HP Tow-Behind Sprayer offers the ultimate in performance and versatility. With its large-capacity, high-volume electric pump, and premium pistol-grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It is the perfect match for the operator who wants extreme performance.
The heavy-duty frame rolls smoothly on 15x6 tires that minimize ground compaction and have a low profile, which maintains a low center of gravity for excellent stability. Cover ground quickly with flexible boom options: a 12.5-ft (3.8-m) precision folding boom, 24-ft (7.3-m) boomless, or no boom at all (boom sold separately).
HP features:
- 100-psi, 4.0-gpm (15-L/min) diaphragm-type pump is designed for high-hour applications and can be run dry without damage
- Redesigned frame cuts assembly time by 20 minutes compared to previous models
- Booms (sold separately) ship pre assembled
- Premium pistol-grip spray gun, designed for single-hand mist to 35-ft (10.7-m) stream
- Front-mount hose tender for easy hose access and storage
- Glycerin-filled pressure gauge
- TeeJet™ pressure regulation/recirculation valve
- Includes sprayer remote control
Additional features
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill-level indicators (in gal.)
Boom options (sold separately):
- 12.5-ft (3.8-m) precision spray boom
- 24-ft (7.3-m) boomless spray nozzles
Optional HP 12.5‐ft (3.8‐m) precision boom (LP22885)
HP 12.5-ft (3.8-m) precision boomThe HP 12.5-ft (3.8-m) precision boom (LP22885) is compatible with the 45-gal. (170-L) HP Tow-Behind Sprayer. The folding boom is made to cover ground quickly and thoroughly with five precision spray tips, TeeJet nozzle bodies, and commercial-grade diaphragm check valves. The outer tips offer versatility with built-in shut-offs to allow an adjustable 7.5-, 10-, or 12.5-ft (2.3-, 3.05-, or 3.8-m) spray swath.
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
45-gal. (170-L) HP Tow-Behind Sprayer
Order number: LP39963
Optional HP 12.5‐ft (3.8‐m) precision boom
Order number: LP22885
Optional HP boomless spray nozzles
Order number: LP22884
TeeJet is a trademark of Spraying Systems Company.
Features include:
- Folding spring hinge
- Breakaway design
- Five TeeJet tips and nozzle bodies
- Adjustable spray swath of 7.5-, 10-, or 12.5-ft (2.3-, 3.05-, or 3.8-m)
- 0.5-in. (1.3-cm) rubber hose
Optional 24-ft (7.3-m) HP boomless spray nozzles (LP22884)
24-ft (7.3-m) HP boomless nozzlesThe 24-ft (7.3-m) HP boomless spray nozzles (LP22884) are compatible with the 45-gal. (170-L) HP Tow-Behind Sprayer. The boom is perfect for covering ground quickly and thoroughly with a 24-ft (7.3-m) spray swath. It is ideal for uneven terrain or where precision spray application is not necessary.
Features include:
- Three TeeJet tips and nozzle bodies
- Commercial-grade diaphragm check valves
- 0.5-in. (1.3-cm) rubber hose
45-gal. (170-L) Tow-Behind SprayerThe 45-gal. (170-L) HP Tow-Behind Sprayer offers the ultimate in performance and versatility. With its large-capacity, high-volume electric pump, and premium pistol-grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It is the perfect match for the operator who wants extreme performance.
The heavy-duty frame rolls smoothly on 15x6 tires that minimize ground compaction and have a low profile, which maintains a low center of gravity for excellent stability. Cover ground quickly with flexible boom options: a 12.5-ft (3.8-m) precision folding boom, 24-ft (7.3-m) boomless, or no boom at all (boom sold separately).
HP features:
- 100-psi, 4.0-gpm (15-L/min) diaphragm-type pump is designed for high-hour applications and can be run dry without damage
- Redesigned frame cuts assembly time by 20 minutes compared to previous models
- Booms (sold separately) ship pre assembled
- Premium pistol-grip spray gun, designed for single-hand mist to 35-ft (10.7-m) stream
- Front-mount hose tender for easy hose access and storage
- Glycerin-filled pressure gauge
- TeeJet™ pressure regulation/recirculation valve
- Includes sprayer remote control
Additional features
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill-level indicators (in gal.)
Boom options (sold separately):
- 12.5-ft (3.8-m) precision spray boom
- 24-ft (7.3-m) boomless spray nozzles
Optional HP 12.5‐ft (3.8‐m) precision boom (LP22885)
HP 12.5-ft (3.8-m) precision boomThe HP 12.5-ft (3.8-m) precision boom (LP22885) is compatible with the 45-gal. (170-L) HP Tow-Behind Sprayer. The folding boom is made to cover ground quickly and thoroughly with five precision spray tips, TeeJet nozzle bodies, and commercial-grade diaphragm check valves. The outer tips offer versatility with built-in shut-offs to allow an adjustable 7.5-, 10-, or 12.5-ft (2.3-, 3.05-, or 3.8-m) spray swath.
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
45-gal. (170-L) HP Tow-Behind Sprayer
Order number: LP39963
Optional HP 12.5‐ft (3.8‐m) precision boom
Order number: LP22885
Optional HP boomless spray nozzles
Order number: LP22884
TeeJet is a trademark of Spraying Systems Company.
Features include:
- Folding spring hinge
- Breakaway design
- Five TeeJet tips and nozzle bodies
- Adjustable spray swath of 7.5-, 10-, or 12.5-ft (2.3-, 3.05-, or 3.8-m)
- 0.5-in. (1.3-cm) rubber hose
Optional 24-ft (7.3-m) HP boomless spray nozzles (LP22884)
24-ft (7.3-m) HP boomless nozzlesThe 24-ft (7.3-m) HP boomless spray nozzles (LP22884) are compatible with the 45-gal. (170-L) HP Tow-Behind Sprayer. The boom is perfect for covering ground quickly and thoroughly with a 24-ft (7.3-m) spray swath. It is ideal for uneven terrain or where precision spray application is not necessary.
Features include:
- Three TeeJet tips and nozzle bodies
- Commercial-grade diaphragm check valves
- 0.5-in. (1.3-cm) rubber hose
Spreaders
Mounted electric spreaderThe mounted electric broadcast spreader for Select Series and Signature Series Tractors is ideal for medium- to large-size jobs and can be used to apply fertilizer, weed killer, sand, lime, and de-icer:
- Compatible with X300 and X500 Select Series and X700 Signature Series Tractors
- X300 Series Tractors must be equipped with 35-lb (16-kg) front wheel weights or front weight bracket and two 42-lb (19.1-kg) Quik-Tatch weights.
- The electric broadcast spreader is not compatible with the X300R Rear Discharge Tractor.
- When used on X700 Series Tractors, the spreader is not compatible with the weather enclosure, cabs, rear receiver hitch, or 3-point hitch.
Key features are as follows:
- 125-lb (57-kg) capacity injection molded poly hopper
- Durable welded, powder-coat frame
- Ice-melt capability
- Gear motor with 5-to-1 reducer
- Stainless-steel shutoff plates
- Directional control
- Hopper cover is standard equipment
- Available option: Barrier shield, 125-lb (57-kg) spreader
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Select Series Electric Spreader
Item number: LP35439
Spreader barrier shieldThe barrier shield is used to direct product downward (36-in. [914-mm] width), converting the rotary spreader into a drop spreader. Perfect for ice melt and salt spreading, or for targeting specific areas.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
125-lb electric broadcast spreader barrier shield
Order number: LP23117
125-lb (57-kg) Pull-Type Spin Spreader John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:
- Seed
- Fertilizer
- Insecticide
- Salt
All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.
Features include:
- Positive on/off system (no cables)
- 125-lb (57-kg) capacity corrosion-resistant polyurethane hopper
- 13-in. (33-cm) pneumatic tires for easy rolling
- Enclosed gearbox (metal gears)
- Ergonomic dual handle featuring Accu-way™
- Accu-way even spread pattern adjustment
- Includes screen and cover
Accu-way is a trademark of Spyker Spreaders, Inc.
Hopper screen and throat opening
Hopper screen and throat openingHopper screens keep out debris and serve as chunk graters.
A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.
Spinner
SpinnerSpinners are made of high-impact plastic that will not crack or break.
Dial-A-Matic rate control
Dial-A-Matic rate controlThe Dial-A-Matic rate control lets the operator fine-tune the rate application:
- Dial position locks and unlocks automatically.
- More than 80 settings provide an accurate application of materials.
Specifications
| 125-lb (57-kg) Pull-Type Spreader | 175-lb (79-kg) Pull-Type Spreader | |
| Recommended market | Homeowner | Homeowner |
| Type | Tow-behind | Tow-behind |
| Bundle number | LP25353 | |
| Box capacity | 125 lb (57 kg), 2.5 cu ft (0.07 m3) | 175 lb (79 kg), 3.5 cu ft (0.1 m3) |
| Hopper size, in. (cm) | 14.5x25.25x19.75 (36.8x64.1x50.2) | 18.5x27.5x21.5 (47x69.9x54.6) |
| No-rust versatility | ||
| Hopper | Polyethylene | Polyethylene |
| Hopper screen | Aluminum | Aluminum |
| Hopper bottom plate | Stainless steel | Stainless steel |
| Throat opening, in. (cm) | 0.81x2.75 (2.1x7) | 0.81x2.75 (2.1x7) |
| Connecting hardware | Stainless steel | Stainless steel |
| Accurate application | ||
| Rate control | 80-setting Dial-A-Matic knob | 80-setting Dial-A-Matic knob |
| Rate gate | No-stick nylon | No-stick nylon |
| Rate gate linkage | Stainless steel | Stainless steel |
| Even dispersal | ||
| Spinner, in. (cm) | 12 (366) | 12 (366) |
| Spread pattern, ft (m) | 10 to 12 (3.1 to 3.7) wide | 10 to 12 (3.1 to 3.7) wide |
| Spread pattern equalizer | Accu-way™ | Accu-way |
| Spinner shaft | Zinc-plated steel | Zinc-plated steel |
| Rotary agitator | Stainless steel | Stainless steel |
| Miscellaneous | ||
| Frame | Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steel | Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel |
| Frame width, in. (cm) | 18 (45.7) | 18 (45.7) |
| Drive gears | Heavy-duty die-cast metal | Heavy-duty die-cast metal |
| Axle | 0.63-in. (15.9-cm) solid steel, zinc plated | 0.63-in. (15.9-cm) solid steel, zinc plated |
| Wheels/tires | 13-in. x 5-in. (33-cm x 13-cm) pneumatic | 13-in. x 5-in. (33-cm x 13-cm) pneumatic |
| Recommended travel speed | 3.5 mph (5.6 km/h) | 3.5 mph (5.6 km/h) |
| Warranty | One-year limited | One-year limited |
| Net weight, lb (kg) | 29 (13.2) | 34 (15.4) |
Accu-way is a trademark of Spyker Spreaders, Inc.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
125-lb Pull-Type Spin Spreader
Order number: LP25353
175-lb (79-kg) Pull SpreaderJohn Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:
- Seed
- Fertilizer
- Insecticide
- Salt
All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.
Features include:
- Positive on/off system (no cables)
- 175-lb (79.4-kg) capacity corrosion-resistant polyurethane hopper
- 13-in. (33-cm) pneumatic tires for easy rolling
- Fully enclosed gear box with metal gears for long life
- Accu-way even spread pattern adjustment
- Includes screen and cover
Hopper screen and throat opening
Hopper screen and throat openingHopper screens keep out debris and serve as chunk graters.
A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.
Spinner
SpinnerSpinners are made of high-impact plastic that will not crack or break.
Dial-A-Matic rate control
Dial-A-Matic rate controlThe Dial-A-Matic rate control lets the operator fine-tune the rate application:
- Dial position locks and unlocks automatically.
- More than 80 settings provide an accurate application of materials.
Specifications
| 125-lb (57-kg) Pull-Type Spreader | 175-lb (79-kg) Pull-Type Spreader | |
| Recommended market | Homeowner | Homeowner |
| Type | Tow-behind | Tow-behind |
| Bundle number | LP25353 | |
| Box capacity | 125 lb (57 kg), 2.5 cu ft (0.07 m3) | 175 lb (79 kg), 3.5 cu ft (0.1 m3) |
| Hopper size, in. (cm) | 14.5x25.25x19.75 (36.8x64.1x50.2) | 18.5x27.5x21.5 (47x69.9x54.6) |
| No-rust versatility | ||
| Hopper | Polyethylene | Polyethylene |
| Hopper screen | Aluminum | Aluminum |
| Hopper bottom plate | Stainless steel | Stainless steel |
| Throat opening, in. (cm) | 0.81x2.75 (2.1x7) | 0.81x2.75 (2.1x7) |
| Connecting hardware | Stainless steel | Stainless steel |
| Accurate application | ||
| Rate control | 80-setting Dial-A-Matic knob | 80-setting Dial-A-Matic knob |
| Rate gate | No-stick nylon | No-stick nylon |
| Rate gate linkage | Stainless steel | Stainless steel |
| Even dispersal | ||
| Spinner, in. (cm) | 12 (366) | 12 (366) |
| Spread pattern, ft (m) | 10 to 12 (3.1 to 3.7) wide | 10 to 12 (3.1 to 3.7) wide |
| Spread pattern equalizer | Accu-way™ | Accu-way |
| Spinner shaft | Zinc-plated steel | Zinc-plated steel |
| Rotary agitator | Stainless steel | Stainless steel |
| Miscellaneous | ||
| Frame | Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steel | Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel |
| Frame width, in. (cm) | 18 (45.7) | 18 (45.7) |
| Drive gears | Heavy-duty die-cast metal | Heavy-duty die-cast metal |
| Axle | 0.63-in. (15.9-cm) solid steel, zinc plated | 0.63-in. (15.9-cm) solid steel, zinc plated |
| Wheels/tires | 13-in. x 5-in. (33-cm x 13-cm) pneumatic | 13-in. x 5-in. (33-cm x 13-cm) pneumatic |
| Recommended travel speed | 3.5 mph (5.6 km/h) | 3.5 mph (5.6 km/h) |
| Warranty | One-year limited | One-year limited |
| Net weight, lb (kg) | 29 (13.2) | 34 (15.4) |
Accu-way is a trademark of Spyker Spreaders, Inc.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
175-lb Pull-Type Spin Spreader
Order number: LP25354
40-in. (102-cm) Tow-Behind Aerator SpreaderThe 40-in. (102-cm) Aerator Spreader can do two jobs at once. It perforates the soil while the calibrated drop-spreader follows with seed, lime, or fertilizer. It can also be used to just aerate the lawn:
- 40-in. (102-cm) width, with up to 2 in. (5.1 cm) of penetration
- 132 steel-tine tips on 8-in. (20-cm) diameter tine stars
- Three-position, full-sized lift lever
- Direct spreader drive for consistent performance
- Adjustable flow control
- 100-lb (45-kg) spreader capacity
- 4.10/3.5-4 pneumatic tires for easy pulling
- 75-lb (34-kg) capacity weight tray
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
| Width | 40 in. (101.6 cm) |
| Aerator depth | Up to 2 in. (5.1 cm), two positions |
| Spreader capacity | 100 lb (45 kg) |
| Tines | |
| Number of tips | 132 |
| Diameter | 8 in. (20.3 cm) |
| Material | Steel |
| Lift adjuster | Manual |
| Wheels | 4.10/3.5-4, pneumatic |
| Drive | Direct |
| Weight-tray capacity | 100 lb (45 kg) |
Vehicle compatibility and requirements
Requirements and/or recommendations: tow-behind equipment
- Rear wheel weights are recommended for additional traction.
- The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
- The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg). - For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
40-in. (102-cm) Tow-Behind Aerator Spreader
Order number: LPAS40JD
130-lb (59-kg) Pull-Type Spin Spreader Broadcasts fertilizer, weed control, grass seed or ice melter products while towing behind a riding lawn tractor. 130-lb (59-kg) polyethylene hopper resists rust and is easier to clean. Spread pattern will go up to 12 ft (31 cm) depending on speed and material. New direct rod control with easy to reach handle opens and closes the material gate. Heat treated steel gears with plastic enclosure are protected from corrosive material. Large knobby tread tires roll easily over turf.
Two-year warranty.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
130-lb Pull-Type Spin Spreader
Order number: LP39087
Broadcast SpreaderThis 175-lb (79-kg) pull-type broadcast spreader is designed for homeowner use:
- The polyethylene hopper will not dent or rust.
- All stainless-steel interior hardware, shaft, and agitator help to prevent corrosion.
- Large pneumatic turf tires ensure a positive drive and smooth operation.
- High-speed, 6:1 reduction glass-filled nylon gears provide the widest spread pattern at the slowest speeds.
- Fully enclosed gearbox eliminates downtime and maintenance.
- Autoflow feature stops the flow of materials - automatically - to prevent burns.
- Directional spread-pattern control feature provides positive shutoff along sidewalks and driveways.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
175-lb (79-kg) Broadcast Spreader
Order number: LPBS36JD
Sun Protection
Sun shade for Select Series X300 and X500 Tractors
Sun shade installs on heavy-duty CargO MountsThe sturdy sun shade provides an effective way to keep the sun off of the operator for more comfortable warm-weather operation of the tractor:
- Frame is made of strong 1.25-in. (32-mm) diameter steel tube with 0.063-in. (1.6-mm) wall thickness.
The sun shade mounts to the heavy-duty CargO Mount™ system.
- Sun shade includes the 4-wheel-steer rear weight bracket to provide a sturdy
Quik-Tatch mounting system.- Holds up to two 42-lb (19-kg) Quik-Tatch weights on X300 Series Tractors
- Holds up to four 42-lb (19-kg) Quik-Tatch weights on X500 Multi-Terrain Tractors
- Cloth top measures 32-in. (81.3-cm) long by 34-in. (86.4-cm) wide.
- Rear panel is made of cloth mesh material to provide additional protection from the sun while permitting the operator to see through it.
- Two bolts with hand knobs on the mounting posts allow easy removal of the sun shade.
- Elastic strap with clip is included to hold the 7-bu (247-L) hopper top open when the hopper is installed.
- Overall height to the top of the sun shade is 72 in. (182.9 cm).
The sun shade is compatible with the following:
- Select Series™ X300, X304, X320, X324, X340, X350, X354, X360, X370, X380, X384, X390, and X394 Tractors
- Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
Ordering Information
Please contact your local John Deere dealer for availability and pricing information.
X300/X500 Sun Shade
Order number: BM23054
Sun shade installed using 7-bu (247-L) bagger bracketThe 7-bu (247-L) 2-bag hopper or 14-bu (493-L) 3-bag hopper can be installed and used with the sun shade installed. The sun shade installation instructions explain how to install the hoppers with the sun shade.
Thatchers
Front thatcher
Front thatcherThe thatcher, used on a regular basis, reduces excessive thatch buildup that can be damaging to a lawn's health.
Since it provides more gentle, less aggressive action than a power rake, it can be used as a preventive maintenance tool each time the lawn is mowed.
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
38-in. (97-cm) Front Thatcher
Order number: LP48004
8-in. (20-cm) thatcher extension for wider widthsAn 8-in. (20-cm) extension is available to provide widths of 46 in. (117 cm) and 54 in. (137 cm) (Add an extension to one end of front thatcher to make it 46-in. [117-cm] wide; add an extension to both ends for a 56-in. [142-cm] width.)
Front thatcher installed on X534 TractorA thatcher mounting frame is required to install the 38-in. (97-cm) front-mounted thatcher on a vehicle.
40 in. (102-cm) Tow-Behind ThatcheratorThe 40-in. (102-cm) Thatcherator can be used as a dethatcher or an aerator. It can also be used to prepare an area for seed:
- 40-in. (102-cm) width to cover ground fast
- 20 spring-loaded tines for maximum performance
- Three-position adjustment
- Weight tray to allow increased scratching power
An 8-in. (20-cm) extension is available to provide widths of 48 in. (122 cm) and 56 in. (142 cm) (Add an extension to one end of Thatcherator to make it 48-in. (122-cm) wide and an extension to both ends for a 56-in. (142-cm) width.)
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
| Width | 40 in. (101.6 cm) |
| Tines | |
| Number | 20, spring-loaded tips |
| Diameter | 0.19 in. (0.5 cm) |
| Material | Steel |
| Weight tray capacity | 100 lb (45 kg) |
| Lift adjuster | Three positions |
| Wheel | |
| Size | 8 in. (20.3 cm) |
| Tread | Rib |
| Material | Steel |
| Optional extension | 8 in. (20.3 cm) |
Requirements and/or recommendations: tow-behind equipment
- Rear wheel weights are recommended for additional traction.
- The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
- The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak Mower not to exceed 250 lb (113 kg).
- For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
40-in. (102-cm) Tow-Behind Thatcherator
Order number: LPTA40JD
Tire Chains
TerraGrip Traction BeltProtect your driving surface. TerraGrip Traction Belts offer enhanced traction on snow, mud, dirt, wet asphalt, and wet concrete surfaces. They will not scratch or chip concrete, asphalt, or aggregate drives or walkways. The proven reliability of the traditional steel chain attachment system is used and combined with the performance and durability of reinforced rubber slats. The rubber slats wrap around the tire so only rubber touches the driving surface. The result is aggressive traction without the risk of surface damage, that can happen with traditional chains.
Features:
- Rubber slats surround the tire and will not damage driveways or sidewalks.
- No steel touches the driving surface.
- No-tools installation utilizes a traditional steel chain attachment system.
- Traction is improved on all surfaces, especially loose material (snow, dirt, mud, sand, etc.).
- TerraGrip Traction Belts are approved for John Deere X300, X500 M-T, and X700 Series Tractors.
Additional information for 4-wheel-steer tractor models:
- X700 Series – requires wheel spacer sold separately
- X500 Series – requires wheel stop adjustment
- X300 Series – no additional requirements
Tire chain with optional wheel weights on X728 TractorChains are recommended for extra traction when using attachments such as a snow blower or front blade.
One pair of chains is included in each bundle.
TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, D125, E100, E110, and E120 Tractors.
TY16200 tire chains - 20x10-8 (for some models), 20x10-10
NOTE: For LA135 SE, LA145, LA155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.
TY25229 tire chains - 20x10-8 (for some models), 22x9.5-12
NOTE: For LA165, LA175, D130, D140, D150, D155, D160, D170, E130, E140, E150, E160, E170, and E180 Tractors.
TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.
TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.
TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.
TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016- (SN 040,000-) X734 and X754.
TY25326 tire chains - 26x10.5-12
NOTE: For model year -2015 (SN -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.
TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.
Tow Behind
42-in. (107-cm) Lawn SweeperThe 42-in. (107-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.
Features include:
- 42-in. (107-cm) clearing width
- 17-bu (599-L) capacity to make fast work of picking up material
- Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
- Hitch has seven positions to match up correctly with a variety of vehicles
- Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
- A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
| Brush height | Sweeping conditions |
| Ground level to 1 in. (25 mm) above | Smooth surfaces - driveways, parking lots, and sidewalks |
| 1 in. (25 mm) to 2 in. (50 mm) | Mowed lawns under normal conditions, or light leaves |
| 2 in. (50 mm) to 3 in. (75 mm) | High grass, heavy leaves, or heavy grass clippings |
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
42-in. (107-cm) Tow-Behind Lawn Sweeper
Order number: LPSTS42JD
44-in. (112-cm) Lawn SweeperThe 44-in. (112-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.
Features include:
- 44-in. (112-cm) clearing width
- 17-bu (599-L) capacity to make fast work of picking up material
- Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
- Hitch has seven positions to match up correctly with a variety of vehicles
- Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
- A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
| Brush height | Sweeping conditions |
| Ground level to 1 in. (25 mm) above | Smooth surfaces - driveways, parking lots, and sidewalks |
| 1 in. (25 mm) to 2 in. (50 mm) | Mowed lawns under normal conditions, or light leaves |
| 2 in. (50 mm) to 3 in. (75 mm) | High grass, heavy leaves, or heavy grass clippings |
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
44-in. (112-cm) Tow-Behind Lawn Sweeper
Order number: LP49038
Dethatcher kit for sweeperThis John Deere dethatcher kit has two rows of individually flexing tines that gently but effectively remove grass clippings, leaves, and other lawn debris from your lawn. The kit easily attaches to the front of John Deere's 42-in. (107-cm) Lawn Sweeper (LPSTS42JD) to add thatch pickup to the sweeper's cleaning abilities. The dethatcher does not need to be removed to resume regular sweeping use.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
Dethatcher kit for sweeper
Order number: LP42108
Multi ToolThe Multi Tool includes one platform and two separate attachments, saving space and money.
- Includes 40-in. (101.6-cm) weight tray - capable of holding up to 100 lb (45.4 kg) of weight
- Includes pre-assembled core aerator - reduces soil compaction allowing air, water, and fertilizer to the grass roots
- Includes dethatcher - removes unwanted debris from the top of the soil to allow nutrients to reach the grass roots
- Elongated handle - makes it easier to raise into transport or lower for use
- Spring assisted lever - makes changing the attachments quick and easy
John Deere has combined the best lawn tools into one package.
Two-year warranty.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Multi Tool
Order number: LP39089
36-in. (91-cm) Tow-Behind Lawn RollerThe Lawn Roller packs down sod, seed, and mole ridges. Its tough polyethylene drum does not dent or rust. The drum's rounded ends do not gouge the lawn or make ruts:
- 36-in. (91-cm) wide polyethylene drum
- 390-lb (177-kg) weight for excellent leveling
- Rounded end caps to reduce gouging
- 42-U.S. gal. (159-L) capacity
- Long-lasting Nylatron® bearings
Nylatron is a trademark of QUADRANT AG or its affiliates or licensors.
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
| Width | 36 in. (91 cm) |
| Roller | |
| Size | 36 in. x 18 in. (91 cm x 46 cm) |
| Capacity | 42 U.S. gal. (159 L) |
| Weight (filled) | 390 lb (176.4 kg) |
| Drum/end-cap material | High-density polyethylene (HDPE) |
| Bearings | Nylatron |
Requirements and/or recommendations: tow-behind equipment
- Rear wheel weights are recommended for additional traction.
- The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
- The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
- For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
36-in. (91-cm) Tow-Behind Lawn Roller
Order number: LPPRT36JD
Steel roller 24 in. x 48 in. (61 cm x 122 cm)The lawn roller packs down sod, seed, and mole ridges. Its tough polyethylene drum does not dent or rust. The drum's rounded ends do not gouge the lawn or make ruts.
- 48-in. (61-cm) wide welded-steel drum working width
- 52-in. (132-cm) overall width, approximate
- Up to 910-lb (413-kg) weight when filled with water
- 94-U.S. gal. (356-L) capacity
- 1-in. (2.54-cm) replaceable bearings
- 165-lb (75-kg) approximate dry shipping weight
Compatibility and requirements and/or recommendations
- Compatible with John Deere GT, GX, X500 M-T, X700, and similar-sized lawn and garden tractors.
- Rear-wheel weights are recommended for additional traction.
- The 48-in. (122-cm) Steel Lawn Roller is not recommended for Select Series™ X300s, S240, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or ZTrak™ Residential Mower.
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
Steel roller 24 in. x 48 in. (61 cm x 122 cm)
Order number: LP64738
40-in. (102-cm) Tow-Behind Plug AeratorThe 40-in. (102-cm) Plug Aerator removes plugs of soil up to 3-in. (7.6-cm) deep to allow penetration of air, water, and nutrients. It also helps relieve soil compaction:
- 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
- Three-position lift handle for 2-in. (5-cm) or 3-in. (7.6-cm) plug lengths
- 28 carbonized, 16-gauge, 0.06-in. (1.5-mm) steel, individually serviceable plugging tines
- 1-in. (2.5-cm) diameter high-carbon steel-tine shaft
- 4.10/3.50-4 pneumatic tires for easy pulling
- 175-lb (79-kg) capacity weight tray
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
| Width | 40 in. (101.6 cm) |
| Aerator depth | Up to 3 in. (7.6 cm) |
| Tines | |
| Number of tips | 28 |
| Spacing | 6 in. (15.2 cm) apart |
| Material | Carbonized, 16-gauge, 0.6-in. (1.5-mm) steel |
| Lift adjuster | Manual, three position |
| Wheels | 4.10/3.5-4, pneumatic |
| Weight-tray capacity | 175 lb (79.4 kg) |
Vehicle compatibility and requirements
Requirements and/or recommendations: tow-behind equipment
- Rear wheel weights are recommended for additional traction.
- The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mowers, or Residential ZTrak™ Mowers.
- The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg). - For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
40-in. (102-cm) Tow-Behind Plug Aerator
Order number: LPPA40JD
48-in. (122-cm) Tow-Behind Plug AeratorThe 48-in. (122-cm) Plug Aerator removes plugs of soil up to 3 in. (7.6 cm) deep to allow penetration of air, water, and nutrients and relieve soil compaction:
- 48-in. (122-cm) width for excellent productivity
- Heavy-duty construction for high hour use
- Three-position lift lever
- Adjusts for 2 in. (5 cm) or 3 in. (7.6 cm) of penetration
- 48 carbonized-steel plugging tines in 12 rows spaced 4 in. (10 cm) apart
- 250-lb (113-kg) capacity weight tray
- 1-in. (2.5-cm) diameter steel tine shaft
- Nyliner® tine shaft bearings
- 4.10X3.5-4 pneumatic tires
NOTE: The 48-in. (122-cm) Plug Aerator is not recommended for lawn tractors.
Nyliner is a trademark of Thomson Industries Incorporated.
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
| Width | 48 in. (121.9 cm) |
| Aerator depth | Up to 3 in. (7.6 cm) |
| Tines | |
| Number of tips | 48 |
| Spacing | 4 in. (10.2 cm) apart |
| Material | Carbonized, 16-gauge, 0.06-in. (1.7-mm) steel |
| Lift Adjuster | Manual, three positions |
| Wheels | 4.10/3.5-4, pneumatic |
| Weight-tray capacity | 250 lb (113.4 kg) * |
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
48-in. (122-cm) Tow-Behind Plug Aerator
Order number: LPPA48JD
Vehicle compatibility and requirements
Requirements and/or recommendations: tow-behind equipment
- Rear wheel weights are recommended for additional traction.
- The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mowers, or Residential ZTrak™ Mowers.
- The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
- For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
40-in. (102-cm) Tow-Behind Spiker AeratorThe 40-in. (102-cm) Spiker Aerator penetrates soil, allowing air, water, and nutrients to enter the lawn. It also relieves soil compaction:
- 40-in. (102-cm) width with up to 2 in. (5 cm) of penetration
- 10-in. (25-cm) diameter steel-tine stars
- 132 steel-tine tips on 11 spike wheels
- 3.5-in. (9-cm) spike-wheel spacing
- Full-sized lift lever
- 4.10/3.5-4 pneumatic tires for easy pulling
- 100-lb (45-kg) capacity weight tray 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
Quality design
John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.
This implement features legendary John Deere performance and quality.
Specifications
| Width | 40 in. (101.6 cm) |
| Aerator depth | Up to 2 in. (5.1 cm) |
| Tines | |
| Number of tips | 132 |
| Diameter | 10 in. (25.4 cm) |
| Spacing | 3.5 in. (8.9 cm) apart |
| Material | Steel |
| Lift adjuster | Manual |
| Wheels | 4.10/3.5-4, pneumatic |
| Weight tray capacity | 100 lb (45 kg) |
Requirements and/or recommendations: tow-behind equipment
- Rear wheel weights are recommended for additional traction.
- The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
- The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
- For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
40-in. (102-cm) Tow-Behind Spiker Aerator
Order number: LPSAT40JD
Weather Enclosures
Weather enclosure for X300 and X500 M-T TractorsThe roomy steel-frame cab shields the operator against snow, rain, sun, and wind.
Key features include:
- Easy entry with hinged-door access
- Double-zippered access hole for control maneuverability
- Super-clear vinyl windows that are cold-crack tested to -4°F (-20°C)
- Zippered windows that allow for additional airflow
- Assembles and installs with standard hand tools in one hour
- Overall height from ground to top of cab of 78 in. (198 cm)
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Weather enclosure
- Discontinued - LP36740 Weather Enclosure - Select Series™ X300, X304, X310, X320, X324, X340, and X360 Tractors
- LP55438 Weather Enclosure - Select Series™ X300, X304, X310, X320, X324, X340, X350, X360, X354, X370, X380, X384, X390, and X394 Tractors
- Discontinued - LP36741 Weather Enclosure - Select Series X500, X520, X530, X534, X540, and X590 (model year 2015) Multi-Terrain Tractors
- LP55439 Weather Enclosure - Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
Weights
30-lb (13.6-kg) front wheel weightOne 30-lb (13.6-kg) cast-iron weight may be installed on each front wheel for additional stability when operating on hillsides or with heavy rear equipment.
Requirements:
- Mounting may require drilling two holes in the wheel rim.
- BM17978 mounting hardware kit is required for each weight.
NOTE: Front wheel weights are not available for special-edition tractors because the styled front wheel design does not have appropriate holes for mounting the wheel weights and no adapter is available.
Two 50-lb (22.7-kg) weights (order tire chains separately)One or two 50-lb (22.7-kg) cast-iron weights may be installed on each rear wheel to provide extra traction and stability.
Features include:
- Weights are made of durable cast iron and painted John Deere yellow.
- Weights may be installed with the wheel in either the narrow or wide position.
- These weights may be used on both two-wheel-steer and all-wheel-steer tractors.
- To stack the weights and install two on a wheel, two 1/2x8-in. (12.7x203-mm) bolts are required per wheel (not furnished).
- X700 Special Edition Tractors (model year 2012 and prior) and X738, X739, and X758 Signature Series Tractors require a BM21497 wheel weight adapter ring on each rear wheel on which weights are to be installled.
50-lb (22.7-kg) plastic-shell rear wheel weightOne 50-lb (22.7-kg) plastic-shell rear wheel weight may be installed on each rear wheel to provide extra traction and stability.
The outer shell is molded of tough polyethylene plastic and filled with a heavy, granular material that contains a high percentage of iron. A bonding substance is added to hold the material together so that it will remain intact, even if the shell is damaged.
Multiple stacking is not recommended.
Overall width of the tractor will be increased by approximately 2 in. (51 mm) when weights are installed.
Compatibility:
- 23x10.5-12 and 24x12-12 wheels and tires in narrow position only
- 26x12-12 wheels and tires
Weights are packaged one per carton, with necessary hardware for installation on a wheel.
X700 Special Edition Tractors (model year 2012 and prior) and X738, X739, and X758 Signature Series Tractors require a BM21497 wheel weight adapter ring on each rear wheel on which weights are to be installed.
NOTES:
- Plastic rear wheel weight comes with necessary hardware for installation.
- X Series Special-Edition Tractors require an additional BM21497 special-edition weight adapter for each rear wheel on which weights are to be installed.
For 50-lb (22.7-kg) cast-iron wheel weights on 23x10.50-12 or 24x12-12 rear tires:
BM17985 - for mounting one 50-lb (22.7-kg) weight
BM17977 - for mounting two 50-lb (22.7-kg) weights
For 50-lb (22.7-kg) cast-iron wheel weights on 26x12-in. rear tires:
BM17977 - for mounting one 50-lb (22.7-kg) weight
BM18101 - for mounting two 50-lb (22.7-kg) weights
One (A) or two (B) 50-lb (22.7-kg) weightsFor 70-lb (32-kg) starter cast-iron wheel weight on 26x12-12-in. rear tires:
BM18089 - for mounting 70-lb (32-kg) starter weight
70-lb (32-kg) starter weightFor 70-lb (32-kg) starter and 50-lb (22.7-kg) cast-iron weight(s):
BM17977 - for mounting one 70-lb (32-kg) starter and one 50-lb (22.7-kg) weight
BM18101 - for mounting one 70-lb (32-kg) starter and two 50-lb (22.7-kg) weights
70-lb (32-kg) starter weight and one or two 50-lb (22.7-kg) weightA - one (1) UC13499 and one (1) BM17972 weight
B - one (1) UC13499 and two (2) BM17972 weights
Four-wheel-steer tractors
NOTE: Plastic wheel weight is not compatible with four-wheel-steer tractors.
For 50-lb (22.7-kg) cast-iron wheel weight on 26x10.50-12 tires:
BM18094 - for mounting one 50-lb (22.7-kg) weight
BM17977 - for mounting two 50-lb (22.7-kg) weights
One (A) or two (B) 50-lb (22.7-kg) cast-iron weight on 4WSNOTES:
- Plastic rear wheel weight comes with necessary hardware for installation.
- X Series Special-Edition Tractors require an additional BM21497 special-edition weight adapter for each rear wheel on which weights are to be installed.
For 50-lb (22.7-kg) cast-iron wheel weights on 23x10.50-12 or 24x12-12 rear tires:
BM17985 - for mounting one 50-lb (22.7-kg) weight
BM17977 - for mounting two 50-lb (22.7-kg) weights
For 50-lb (22.7-kg) cast-iron wheel weights on 26x12-in. rear tires:
BM17977 - for mounting one 50-lb (22.7-kg) weight
BM18101 - for mounting two 50-lb (22.7-kg) weights
One (A) or two (B) 50-lb (22.7-kg) weightsFor 70-lb (32-kg) starter cast-iron wheel weight on 26x12-12-in. rear tires:
BM18089 - for mounting 70-lb (32-kg) starter weight
70-lb (32-kg) starter weightFor 70-lb (32-kg) starter and 50-lb (22.7-kg) cast-iron weight(s):
BM17977 - for mounting one 70-lb (32-kg) starter and one 50-lb (22.7-kg) weight
BM18101 - for mounting one 70-lb (32-kg) starter and two 50-lb (22.7-kg) weights
70-lb (32-kg) starter weight and one or two 50-lb (22.7-kg) weightA - one (1) UC13499 and one (1) BM17972 weight
B - one (1) UC13499 and two (2) BM17972 weights
Four-wheel-steer tractors
NOTE: Plastic wheel weight is not compatible with four-wheel-steer tractors.
For 50-lb (22.7-kg) cast-iron wheel weight on 26x10.50-12 tires:
BM18094 - for mounting one 50-lb (22.7-kg) weight
BM17977 - for mounting two 50-lb (22.7-kg) weights
One (A) or two (B) 50-lb (22.7-kg) cast-iron weight on 4WS
42-lb (19-kg) Quik-Tatch weight
42-lb (19-kg) weights and optional mounting bracketThe 42-lb (19-kg) Quik-Tatch can be used to counterbalance a heavy front or rear attachment and/or provide greater stability, especially when operating on hills.
This weight is constructed of cast iron and weighs approximately 42 lb (19 kg).
Some vehicles have built-in front and/or rear weight brackets to hang the weights on; others require a weight bracket that must be ordered separately.
X400/X500 Heavy-Duty Garden Tractors and X700 Series Tractors require the following parts when weights are installed on the front of the tractor:
- One M147986 weight retaining rod (Parts)
- Two M40461 spring clip (Parts)
Standard front bumper
Optional front weight bracket/bumper installedThe optional front weight bracket/bumper is available to replace the standard front bumper on the following tractors:
- Select Series™ X300, X300R, X304, X305R, X310, X320, X324, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
- Model year 2007 and later (SN 020001-) Select Series model X500 Tractor
- All X530 Select Series Tractors
- Model year 2011 and later (SN 060001-) Select Series model X534 Tractor
- X570 Select Series Tractor
Front weight bracket/bumper with four weightsNOTE: Weights are ordered separately.
Holds up to four 42-lb (19.1-kg) Quik-Tatch weights:
- Provides an alternative to front-wheel weights for ballasting rear-mounted equipment
- Makes the 42-in. (106.7-cm) Hydraulic Tiller compatible with the X530 Tractor
- Functions as a bumper when weights are not installed
Can be used in combination with all John Deere equipment, except the following:
- Styled front bumper (BM23056)
- 40-in. (101.6-cm) Tractor Shovel
30-lb (13.6-kg) front wheel-weight shownHardware is required for installing each front-wheel weight.
Requirements:
- Mounting may require drilling two holes in the wheel rim.
- BM17978 mounting hardware kit is required for each weight.
NOTE: Front-wheel weights are not available for special edition tractors because the styled front-wheel design does not have appropriate holes for mounting the wheel weights and no adapter is available.