655K CRAWLER LOADER
Crawler Loader
- Net Power: 116 kW (155 hp) @ 1,400 rpm
- Operating Weight: 18 422 kg (40,614 lb.)
- Heaped Capacity: 1.9 m3 (2.4 cu. yd.)
- Breakout Force: 148 kN (33,271 lbf)
Apply For Financing
Features
FT4/Stage IV-compliant 6.8-L John Deere PowerTech™ engine boasts a boost in horsepower and standard Eco mode, for maximum fuel economy without loss of performance.
Auto-idle helps save fuel by reducing engine speed when the crawler loader is not moving and no functions are being activated.
Dual-path hydrostatic (HST) transmission allows you to carry a full load through turns without losing material.
HST drivetrain and load-sensing hydraulics deliver fatigue-beating, low-effort response and control, at all times and in all conditions.
Hydraulically driven fan runs only as needed, for cooling and fuel efficiency.
Counter-rotating tracks boost maneuverability on crowded jobsites.
Infinitely variable speed range to 6.2 mph
Single-lever joystick or two or three-lever hydraulic controls - choose the layout that best fits your operator’s style.
Control the throttle using buttons on the sealed-switch module.
Heavy-duty undercarriage is sealed, lubricated, and built to last.
Swing-out side shields and tilt-out grille enable access to both sides of the coolers, for low effort debris removal.
Specifications
Compare the specifications of up to 4 models
| DRIVELINE | 655k-crawler-loader Current Model |
|---|---|
| Engine Manufacturer | John Deere |
| Engine Model | PowerTech PVS 6068 |
| Emission Rating | Tier 4 |
| Displacement, ltr (Inches³) | 6.8 (415) |
| Rated Speed, rpm | 1700 |
| Engine Output - Net, kW (hp) | 116 (155) |
| Transmission type | Hydrostatic |
| Final drive type | In-line Drive Motor - Double Reduction Planetary |
| Track rollers per side - std | 6 |
| Track shoe pitch, mm (inches) | 190 (7.5) |
| Track shoe width, mm (inches) | 510 (20) |
| Ground Contact Area, cm² (Inches²) | 24622 (3816) |
| Track shoes per side - std | 38 |
| DIMENSIONS | |
| Overall length, mm (ft/in) | 6735 (22 ft 1 in) |
| Max. height, mm (ft/in) | 3120 (10 ft 3 in) |
| Track length on ground, mm (inches) | 2414 (95) |
| Ground clearance, mm (inches) | 395 (15.6) |
| Track gauge - standard, mm (ft/in) | 1740 (5 ft 9 in) |
| Shovel 1 width, mm (ft/in) | 2470 (8 ft 1 in) |
| Shovel 1 dump height 45° max, mm (ft/in) | 2665 (8 ft 9 in) |
| Bucket pin height, mm (ft/in) | 3710 (12 ft 2 in) |
| Bucket reach - max, mm (ft/in) | 1036 (3 ft 5 in) |
| Digging depth, mm (inches) | 152 (6) |
| Steering clutches and brakes | No |
| CAPACITIES | |
| Fuel tank capacity, ltr (gallons (US)) | 263 (69.5) |
| Implement hydraulic tank, ltr (gallons (US)) | 121.5 (32.1) |
| Shovel 1 capacity, m³ (yd³) | 1.9 (2.4) |
| PERFORMANCE | |
| Ground bearing pressure - standard, kPa (PSI) | 73.7 (10.7) |
| Static tipping load shovel 1, kg (lbs) | 12443 (27432) |
| Breakout force - max, kN (lbf) | 148 (33271) |
| Voltage, V | 24 |
| Alternator output, Amp | 100 |
| Pump type | Piston Pump - Load Sensed |
| Pump flow, lt/min (gallons (US) / min) | 189 (50) |
| Relief pressure, kPa (PSI) | 26028 (3775) |
| WEIGHTS | |