W155

Windrower

  • Cab suspension provides smooth ride for maximum productivity in rough fields
  • Visibility and powerful exterior lighting make harvest easier during day and night
  • Optional reverser clears plugs effortlessly for higher productivity during tough harvest conditions
  • Quick-attach platforms make transport and storage a breeze





Features



Standard cab suspensionStandard cab suspension
Coil-over-shock suspensionCoil-over-shock suspension

Four-point independent suspension delivers a smoother, more comfortable ride. The W155 has four coil-spring shock absorbers working in conjunction with fore-aft and side-to-side stabilizers to minimize cab roll. The shocks are placed at each corner of the cab so the entire cab can go up or down from the resting position. This suspension makes the W155 one of the most comfortable cabs in the industry.

Excellent visibility to see the platform and crop during field operation
Draper visibilityDraper visibility
Visibility to the entire platformVisibility to the entire platform

Large, wide-front glass and cab positioned forward and above the platform give excellent visibility to the cutterbar and incoming crop across the widest platforms. This allows ease of operation and maximum productivity even in the toughest cutting conditions.

Powerful exterior lighting makes nighttime operation almost as easy as in the daytime
Lighting with beacon and high-intensity discharge (HID) optionsLighting with beacon and high-intensity discharge (HID) options
Lighting and markingsLighting and markings
Rear lightingRear lighting
Side/rear adjustable lightingSide/rear adjustable lighting

Halogen lighting is used to give the operator excellent visibility when operating at nighttime or in low-visibility conditions.

  • Automotive-type lamps use replaceable bulbs for easy service.
  • Seven headlights are mounted on the front of the cab to illuminate the cutting area in front of the platform. This gives excellent visibility to the crop and obstacles in the fields.
  • Two rear work lights are mounted on the rear of the machine.
  • Two adjustable side or rear-facing work lights are mounted on the rear of the cab to illuminate the area to the sides and rear of the machine. This allows seeing stubble and obstacles in the field. The left-hand side light has a delay egress feature.
  • When transporting in road range, the flashing hazard lights (and beacon lights if equipped) come on automatically.

An optional HID lighting package (two mirror-mounted HID lights) is available to provide additional lighting. Optional warning beacon lights are available, providing additional visibility during transport.

Platform reverser controlsPlatform reverser controls

An optional reverser is available on the W155 only. It is easily activated from the operator's station to clear the platform of plugs that may occur.

 

On the 400D Platforms, the reverser slowly reverses the knife drive and optional hay conditioner if equipped to clear plugs. The reverser is highly recommended when using the optional hay conditioner with the 400D Draper Platform.

 

On the 100A Auger Platform the reverser slowly reverses the conditioning rolls, auger, and reel. This makes a difficult job easier, so the operator can be more productive.

 

Operators can run the machines nearer to their maximum capacity and it will take less time to unplug, adding to the machine productivity.

 

Reverser valve blockReverser valve block
#

The reverser consists of a valve block and valves shown in photo above. It is the gold-colored valve block to the right of the photo. It is shown plumbed for a 100A Auger Platform.

Attaching and detaching platforms is easy, allowing fast and narrow draper transport and the ability to quickly change from hay to grain harvest. This allows those with diverse operations to use the machine for more hours annually, spreading out their costs.

 

Single-point multicoupler 400DSingle-point multicoupler 400D
Multicoupler storageMulticoupler storage

A single-point multicoupler on the right-hand side of the machine stores easily out of the way for hay use and is conveniently connected to the platform using the multicoupler.

Hydraulic and electric connections on left side of machine
Storage position for hoses and wiringStorage position for hoses and wiring
Hydraulic and electrical connections to 400DHydraulic and electrical connections to 400D

The storage position keeps hydraulic and electric connections away from moving components and secure for transport.

 

Uniquely sized locking flat-face quick-attach couplers provide easy attachment and make connecting virtually fool proof.

 

Self-latching hydraulic center-link optionSelf-latching hydraulic center-link option
Center-link vertical alignmentCenter-link vertical alignment

A self-latching center-link comes with the optional hydraulic center-link, making connecting the platform easy. 

 

The other optional kit for center-link vertical alignment makes attaching and detaching a breeze for those who move fields frequently or want the ease of attaching. This kit gives the capability to move the center-link up and down with a cylinder under the cab controlled by the reel fore-aft buttons on the multi-function control lever.

Pin on lower lift arms for quick-attach
Lower lift arms with draper boot attachedLower lift arms with draper boot attached
Lower lift arms quick-attachLower lift arms quick-attach
Quick-attach 100A Auger PlatformQuick-attach 100A Auger Platform
Quick-attach 400D Draper PlatformQuick-attach 400D Draper Platform

The pin on lower-lift arms allows easy change over from draper to auger platforms and also changing from wide draper in-field operation to narrow transport.

 

Springs and float-fine adjustSprings and float-fine adjust
#

Springs are easily adjustable. Simply raise the platform to relieve spring pressure and turn the bolt to adjust the leverage on the springs. This allows changing platforms quickly and easily. 

 

The float-fine adjust is in base equipment for the W155. It uses a small hydraulic cylinder to adjust spring length and force independently on each side. This also allows changing the platform float for varying field conditions on the go and has three memory positions from which to select. The float-fine adjust also allows rebalancing the platform when using the deck-shift feature by using the same controls on the armrest.

 

Storing the 400DStoring the 400D

Storing 400D Platform with a W155 is easy with great visibility and control to push the platform in through narrow doorways for off-season storage.

Narrow transporting a 435DNarrow transporting a 435D
#

Transport wide draper platforms with ease and control using the ballast box and 400D with an integrated transport system.

Ballast box with seven-pin connectorBallast box with seven-pin connector
#

The optional ballast box enables the power unit to safely transport without a platform. 

 

It also enables narrow transport when used with a 400D Platform with the integrated slow-speed transport system. The ballast box shifts weight onto the drive tires for traction and control when in transport. It also has a hitch for attaching and towing the 400D Platform. It is required to have the electrical wiring harness and hitch pin kit to provide a seven pin connector on the ballast box for lighting. This provides the W155 and 400D Platform with visibility for safe transport.

#

W155 Self-Propelled Windrowers feature an AutoTrac Controller, delivering improved line acquisition and online accuracy to increase performance and lower cost of operation. The fully integrated AutoTrac Controller uses hydraulics to steer the machine, providing more precise control than the AutoTrac Universal solution.

 

Can be ordered from factory

 

The W155 comes from the factory GreenStar™ system ready. Select the AutoTrac kit option when ordering the machine to make the W155 AutoTrac ready. The AutoTrac kit includes a hydraulic steering kit, AutoTrac Controller, and universal GPS receiver mounting kit. An optional GreenStar 3 2630 Display kit and StarFire™ 3000 Receiver can also be ordered from factory.

 

AutoTrac kit

AutoTrac kit (dealer installed) includes:

  • Hydraulic steering AutoTrac kit
  • AutoTrac controller kit
  • Receiver mounting kit

NOTE: Estimated dealer install time for the AutoTrac kit is approximately 8 hours. Installation includes mounting and connecting the hydraulic and steering linkage components, installing the AutoTrac controller, and installing the universal receiver mounting kit.

 

When ordered from the factory, the hydraulic kit will be shipped with the machine. The AutoTrac Controller kit and receiver mounting kit (and GreenStar 3 2630 and SF3000 Receiver if ordered) will ship from a secondary location separate from the machine.

 

Display (cornerpost mount)

GreenStar 3 2630 Display includes:

  • GreenStar 3 2630 Display
  • Display harness
  • Mounting bracket

Receiver

  • StarFire 3000 Receiver - SF1 with deluxe shroud
  • StarFire 3000 Receiver - SF2 ready with deluxe shroud

Compatibility and availability

 

AutoTrac Controller on the W155 Self-Propelled Windrower is compatible with the GreenStar 2630 Display and 1800. If not purchased from the factory at time of machine order, refer to the AMS Sales Manual and Price Page for ordering information.

Specifications


Compare the specifications of up to 4 models

Key Specs w155
Current Model
Engine - ModelPower Tech™ PSS 4.5 L John Deere Final Tier 4
HorsepowerAt 2,300 rpm: 116 kW
155 hp
Ground drive - TypeHydrostatic, three-speed electric-shift motors
Fuel - Capacity367 L (97 U.S. gal.)
Low range
High range 2 speed / Mid range 3 speed
Vehicle
SeatAdjustable air suspension seat with seat belt
Under frame clearance
Weight - TotalCasters spun in - 6749 kg
14880 lb
Casters spun out - 6749 kg
Axle weights with 160A Auger Platform
Casters spun in - 8199 kg
Casters spun out - 8199 kg
Engine
MakeJohn Deere
ModelPowerTech PSS 4.5 L John Deere Final Tier 4
Horsepower116 kW
155 hp
No. of cylindersFour
Exhaust directionVertical
Engine displacement4.5 L
275 cu in.
Engine speeds
Variable idle
Manual variable throttle

Oil crankcase capacity (with filter)
Cooling system24 L
6.3 U.S. gal.
Bearings
Ground drive
Hydraulic platform drive
Number of pumps (Rotary/Auger)Auger - one
Number of motors (Rotary/Auger)Auger - one
Pump displacement
Motor displacemen
Platform float system
Final drives
TypePlanetary
Ratio
Brakes
Hydraulics
Fuel
Electrical system
Alternator130 amp
BatteryTwo batteries - 700 CCA
Tires
Drive wheel standard18.4 x 26 Button
Drive wheel option18.4 x 26 bar or tur, 23.1 x 26 turf or 600/65 R28 radial bar
Caster wheels10 x 16 or16.5L - 16.1 forked casters
Caster wheels option7.5 - 16 SL or 10 x 16 formed or forked casters
Speeds
Low range
High range 2 speed / Mid range 3 speed
High range wth 3 speed
Suspension
Vehicle
Cab
Cab
Construction
Glass
SeatAdjustable air suspension seat with seat belt
Steering columnTilt steering
Instructional seatTraining seat with seat belt
Windshield wiperSingle-blade windshield wiper
Air conditioner


Heater and air conditioner
Lights
FrontSeven halogen lights
SideTwo halogen lights
BackTwo halogen lights
HIDOptional
Display and input
Dimensions (with platform installed)
Overall length without platform
Overall height
Under frame clearance
Wheelbase
Tread width
Turning radius
Weight
Without platform, full fuelAxle weights provided without platform - recommended transport mode
Front axleCasters spun in - 4545 kg
10019 lb
Casters spun out - 5003 kg
11030 lb
Axle weights with 160A Auger Platform
Casters spun in - 6297 kg
13883 lb
Casters spun out - 6688 kg
14745 lb
Rear axleCasters spun in - 2205 kg
4861 lb
Casters spun out - 1746 kg
3850 lb
Axle weights with 160A Auger Platform
Casters spun in - 1902 kg
4193 lb
Casters spun out - 1511 kg
3331 lb
TotalCasters spun in - 6749 kg
14880 lb
Casters spun out - 6749 kg
Axle weights with 160A Auger Platform
Casters spun in - 8199 kg
18076 lb
Casters spun out - 8199 kg
Warranty

Accessories and Attachments

Lighting

The W110 and W150 feature multiple attachments to improve the machine productivity and operator convenience.

Miscellaneous

The W110 and W150 feature multiple attachments to improve the machine productivity and operator convenience.

The W110 and W150 feature multiple attachments to improve the machine productivity and operator convenience.

The W110 and W150 feature multiple attachments to improve the machine productivity and operator convenience.

The W110 and W150 feature multiple attachments to improve the machine productivity and operator convenience.

Jensen AM/FM/WB Heavy Duty Stereo - SWJHD1120

Jensen AM/FM/WB/CD/USB Satellite & iPod Ready Stereo - SWJHD3620

The W110 and W150 feature multiple attachments to improve the machine productivity and operator convenience.

The W110 and W150 feature multiple attachments to improve the machine productivity and operator convenience.

The W110 and W150 feature multiple attachments to improve the machine productivity and operator convenience.

Stereo with AM/FM, Weatherband, SIRIUS Satellite and iPod Ready - SWJHD1620

The W110 and W150 feature multiple attachments to improve the machine productivity and operator convenience.