120 FLAIL SHREDDER
Drawn Flail Shredder
- Front rubber deflectors
- Heavy-duty gearbox
- Steel rotor bearings
- Convenient rear grease fittings
Features
Drawn tractor hookup
Rubber deflectors
GearboxA heavy-duty gearbox transfers power to the power-band drive belts through cross shafts with intermediate bearing supports:
- Gearbox has a constant-duty rating of 150 hp and a maximum rating of 225 hp.
Rotor bearingsThe rotor bearings are now made of steel and have a three-lip seal to keep the dirt out and increase the life of the bearings.
The side and center bearings now have guards in order to avoid leaks and dust, increasing the life of the bearings.
Specifications
Compare the specifications of up to 4 models
| Power requirements | 120-flail-shredder Current Model |
|---|---|
| Tractor PTO hp range | 67-200 kW 90-200 hp |
| Tractor RPM | 1,000 rpm |
| Gear case | |
| Knives | |
| Number of knives | 160 |
| Knife dimensions | |
| Knife mounting system | 7.87 x 63.5 x 143 mm 0.31 x 2.5 x 5.63 in. |
| Type | Heat-treated, reversible, side-slicer, hard-faced, tungsten-carbide knives optional |
| Knives overlap | |
| Tip speed | 171 km/h 106 mph |
| Rotor | |
| Rotor speed | 1,500 rpm |
| Rotor diameter | 139.7 mm 5.5 in. |
| Rotor bearing | Sealed, self-aligning; piloted housing, auxiliary seals, and grease cavities |
| Bearing size | 41.15 mm 1.62 in. |
| Drivetrain | |
| Belts | Power-band, triple 5VX |
| PTO drivelines | |
| Mainframe | |
| Hitch | Drawn |
| Hood thickness | 6.35 mm 1/4 in. |
| Safety deflector | Yes |
| Gauge wheels | 7.60-15 infinitely adjustable row spaces |
| Warning lights | |
| Cutting capacity | |
| Cutting width | 6.1 m 20 ft |
| Cutting height | 7.6 to 25.4 cm 3 to 10 in. |
| Dimensions | |
| Transport width | 2.4 m 7.8 ft |
| Transport length | 7.3 m 24.1 ft |
| Weight | 2,100 kg 4,630 lb |
| Optional equipment | |
| Easy transport | Yes |
| Constant velocity joint driveline | Yes |
| Skid shoes |