995 REVERSIBLE PLOW

Reversible Plow

  • Moldboard frame pivots with the bottoms
  • Plastic moldboard and steel shins
  • Landsides with wedges
  • Front gauge wheels





Features



995 mainframe995 mainframe

The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.

 

The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.

Moldboard frameMoldboard frame

All 995 Moldboard Plows use only one set of bottoms.

 

The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:

  • Requires less 3-point hitch capacity
  • Requires less ballasting of the tractor front end
  • Eliminates initial cost and service requirements for one complete set of standards and bottoms
Integral on-land hitch Integral on-land hitch
#

The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:

  • Category 3/3N Quik-Coupler compatible
  • Tractor rockshaft lever controls the raising and lowering of the plow
    • Maximum plowing depth to 356 mm (14 in.)
  • Provides ample clearance between the tractor tires and the plow
Front gauge wheelsFront gauge wheels

The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.

995 Moldboard Plow rear gauge wheels995 Moldboard Plow rear gauge wheels
#

Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:

  • Equipped with 6.70-15 tires for good flotation
  • Easy turnbuckle adjustment on rear gauge wheel
  • Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)

Specifications


Compare the specifications of up to 4 models

Key Specs 995-reversible-plow
Current Model
Total width of cut
Option 12.3 m
7.5 ft
Option 22.7 m
9 ft
Option 33.2 m
10.5 ft
Option 43.7 m
12 ft
Plowing depth35.6 cm
14 in.
Horsepower required - Option 15-bottom: 96.9-123 kW
130-165 hp
Option 26-bottom: 111.9-130.5 kW
150-175 hp
Option 37-bottom: 130.5-149.1 kW
175-200 hp
Option 48-bottom: 149.1-186.4 kW
200-250 hp
Hitch
TypeCategory 3N or 3
SteeringIntegral, in-furrow
No
Integral, on-land
Yes
Semi-integral, on-land
No
Drawn, in-furrow
No
Drawn, on-land
No
Quick-coupler compatible
Yes
ReversibleType of reversing
Hydraulic cylinder
Yes
No. of bottoms
Option 15
Option 26
Option 37
Option 48
Option 5
Option 6
Option 7
Option 8
Total width of cut
Adjustment
Option 1
2.3 m
7.5 ft
Option 22.7 m
9 ft
Option 33.2 m
10.5 ft
Option 43.7 m
12 ft
Option 5
Option 6
Option 7
Option 8
Weight (approximate)
Option 11,678 kg
3,700 lb
Option 21,860 kg
4,100 lb
Option 32,041 kg
4,500 lb
Option 42,440 kg
5,368 lb
Option 5
Option 6
Option 7
Option 8
Clearances
Vertical81.3 cm
32 in.
Fore-aft
Standards
ShearboltStandard
Safety tripOptional
Spring resetNo
HydraulicNo
Coulters
Option 1
Option 2
Option 3
Bottoms
Option 1Plowing depth
35.6 cm
14 in.
Steel moldboard
Option 2Plastic moldboard
Option 3
Option 4
Option 5
Option 6
Frame
Option 1Thickness: 17.8x10.2x0.8 cm
7x4x0.313 in.
Option 2
Option 3
Expandable
Horsepower required
Option 15-bottom: 96.9-123 kW
130-165 hp
Option 26-bottom: 111.9-130.5 kW
150-175 hp
Option 37-bottom: 130.5-149.1 kW
175-200 hp
Option 48-bottom: 149.1-186.4 kW
200-250 hp
Landing
Gauge wheel
Tires
Trashboards
Additional features

Accessories and Attachments

Bottoms

Steel shinsSteel shins

Steel shins are available as a field-installed option only.

 

The frog is pre-drilled at the factory to accept this attachment.

 

With this attachment, the steel shins will allow longer wear life when soil first comes into contact with the plow, but still offers the option of a plastic moldboard for sticky soil conditions.

Hydraulics

Lighting

SMV Security Emblem - BP16365

Warning Lights - BP16298

Miscellaneous

Double landsidesDouble landsides

Double landsides allow converting five- and six-bottom plows equipped with wedges for operation in hard ground conditions.

 

The bundle includes one extra set of landsides for the front bottoms, four regular large landsides for the rear bottom, and all necessary attaching hardware.

Double landsidesDouble landsides

Double landsides allow converting five- and six-bottom plows equipped with wedges for operation in hard ground conditions.

 

The bundle includes one extra set of landsides for the front bottoms, four regular large landsides for the rear bottom, and all necessary attaching hardware.

Landsides with wedgesLandsides with wedges

This bundle is for five- or six-bottom plows. It allows converting five- or six-bottom plows equipped with double landsides for operation in average-to-soft soil conditions.

 

The bundle includes a set of wedges for all bottoms, one set of extra-large landsides for the rear bottom, and all the necessary attaching hardware.

 

NOTE: Due to line-of-draft characteristics, the seven- and eight-bottom plows do not require use of wedges.

Landsides with wedgesLandsides with wedges

This bundle is for five- or six-bottom plows. It allows converting five- or six-bottom plows equipped with double landsides for operation in average-to-soft soil conditions.

 

The bundle includes a set of wedges for all bottoms, one set of extra-large landsides for the rear bottom, and all the necessary attaching hardware.

 

NOTE: Due to line-of-draft characteristics, the seven- and eight-bottom plows do not require use of wedges.

Front gauge wheelFront gauge wheel

Front gauge wheels can be added to control the plowing depth.

  • Can be adjusted to limit the plowing depth to 356 mm (14 in.)
  • Equipped with 6.70-15 tires